Save up to 15% off with code: STRETCH Shop Now
Looking for Coupons?Call us 800-449-9128 Hablamos Español  
MF MD HG Call & Save
Best Seller
Audix Logo
SKU 
703590 000000000

Audix CabGrabber Microphone Holder 

  • Write a Review

The Cab Grabber from Audix is an innovative miking solution for guitar amps and cabinets. Holding mics weighing up to 1 pound, the Cab Grabber works ...Click To Read More About This Product

In Stock & Ready To Ship

  • Shipping (48 Contiguous U.S. States)
    FREE
  • Your Price :
    $4995.00
  Add to Cart
Add to Wish List

Earn up to 400 reward points.

See All Audix Stand Accessories & Parts
OVERVIEW

Keeps your mic securely fastened to your amp or cab.

The Cab Grabber from Audix is an innovative miking solution for guitar amps and cabinets. Holding mics weighing up to 1 pound, the Cab Grabber works on cabinets with 14" or less depth. Keeps your mic precisely positioned.

Mic Holder does not come with wire clips.

FEATURES
  • An innovative miking solution for guitar amps and cabinets
  • Allows for precise positioning
  • Simple, elegant, compact, and easy to use
  • No tools required
  • Adjustable, tension-held
  • Mic arm hand tightens firmly into position
  • Holds mics weighing up to 1 lb.
  • Works on cabinets with flat surface or recessed edge
  • Will clamp to side of cabinet or over top
  • Fits 8"-14" cabinets and amps
  • Durable steel construction
  • Clips sold separately
Reviews
Loading....

Review Snapshot

by PowerReviews
AudixCabGrabber Microphone Holder
 
3.8

(based on 17 reviews)

Ratings Distribution

  • 5 Stars

     

    (7)

  • 4 Stars

     

    (6)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (3)

88%

of respondents would recommend this to a friend.

Pros

  • Easy to use (6)
  • Functional (6)
  • Good quality (5)

Cons

No Cons

Best Uses

  • Concerts (5)
    • Reviewer Profile:
    • Experienced (4), Professional musician (4)

Most Liked Positive Review

 

audix cab grabber microphone holder

The audix cab grabber is functional and well designed. The "heavy-duty" spring is strong and takes some strength to put the bar in place, but once in place, it's...Read complete review

The audix cab grabber is functional and well designed. The "heavy-duty" spring is strong and takes some strength to put the bar in place, but once in place, it's there to stay. That being said, there are a few issues that need to be voiced, (1)The product workes great with smaller combos. I have a blues jr. and a messa nomad 1x12 and it works great. The mic can be placed anywhere from about the center to the edge of the speaker with no problem, but with larger 112 combos, there are problems, a)because the mic arm is only about 5"(from bar to the end of the mic arm) plus a mic clip (about 1")you only have about 6" from the edge of the amp to the positioned mic. I have a fender pro reverb with tilt back legs. The pro is approx. 26" wide. Center of the amp is 13"(from the edge of the amp), a 12" speaker would extend 6" from that 13" center on each side. With these measurements. the audix cab grabber would just barely be at the edge of the speaker (90 degrees on axis). b) Also the tilt back legs have to be "tilted back" for the bar to fit securely on the side of the amp(no big problem). c) Putting the bar across the top is not a good idea because of getting in the way of the control knobs. Positioned from the bottom is almost impossible. There is a SOLUTION. I use a 6" gooseneck adapted to the arm of the grabber. This gives me that additional length to place the mic well inside the diameter of the speaker, to find that "sweet spot" With the added weight of the gooseneck and the mic(I use a shure beta 58) the mic holds its position very well. The cab grabber works great with 212 combos or 412 cabs. If you use a larger 112 combo, use these simple calculations to determine the position of the mic or buy a gooseneck

VS

Most Liked Negative Review

 

Not for every cab or speaker

Given how it won't work with my setup, that it has limited placement options, and that it picks up cab vibrations, I had to take mine back. Just didn't work out for...Read complete review

Given how it won't work with my setup, that it has limited placement options, and that it picks up cab vibrations, I had to take mine back. Just didn't work out for me. If you've got a brighter amp like a Fender or speakers where miking up the cone edge is what you're after, then you might have a different experience.
Clamps securely over the top or on the side of your cab or combo. Keeps mic placement from moving. Clips hold the mic cable in place out of the way. This is great for crowded stages and consistent mic placement.

However, if you have a cab or amp like a wide body 1x12 combo, or one that requires mic placement more toward the center of cone, on the cap edge or even right in the middle, then this isn't the product for you. Unless you're miking it off-axis, perhaps. The cone edge is not the ideal mic placement option for every amp, cab, and speaker, as some other reviewers suggest.

My Mesa amps with Black Shadows, which are very dark, like to have a 57 pointed straight on where the cone and dust cap meet. I've even had a really good sound guy point a kick drum mic at them straight into the center, and it sounded awesome. With the wider body combo that I have, which also has a slanted top which precludes clamping to the top, you can't place the mic where it needs to go.

The clamp also, naturally, picks up cab vibrations. If you've really got the amp cranked up, this can be a problem too. But some cabs resonate pretty well at median volumes, so again, you're out of luck
Sturdily made, should last forever. No complaints here.
Really pricey for something with limited placement options.

Reviewed by 17 customers

Displaying reviews 1-10

Back to top

Previous | Next »

(7 of 8 customers found this review helpful)

 
1.0

Not for every cab or speaker

By Karl Houseknecht

from Palmyra, VA

See all my reviews

Comments about Audix CabGrabber Microphone Holder:

Given how it won't work with my setup, that it has limited placement options, and that it picks up cab vibrations, I had to take mine back. Just didn't work out for me. If you've got a brighter amp like a Fender or speakers where miking up the cone edge is what you're after, then you might have a different experience.
Clamps securely over the top or on the side of your cab or combo. Keeps mic placement from moving. Clips hold the mic cable in place out of the way. This is great for crowded stages and consistent mic placement.

However, if you have a cab or amp like a wide body 1x12 combo, or one that requires mic placement more toward the center of cone, on the cap edge or even right in the middle, then this isn't the product for you. Unless you're miking it off-axis, perhaps. The cone edge is not the ideal mic placement option for every amp, cab, and speaker, as some other reviewers suggest.

My Mesa amps with Black Shadows, which are very dark, like to have a 57 pointed straight on where the cone and dust cap meet. I've even had a really good sound guy point a kick drum mic at them straight into the center, and it sounded awesome. With the wider body combo that I have, which also has a slanted top which precludes clamping to the top, you can't place the mic where it needs to go.

The clamp also, naturally, picks up cab vibrations. If you've really got the amp cranked up, this can be a problem too. But some cabs resonate pretty well at median volumes, so again, you're out of luck
Sturdily made, should last forever. No complaints here.
Really pricey for something with limited placement options.

(4 of 4 customers found this review helpful)

 
4.0

audix cab grabber microphone holder

By m-meadows

from myrtle beach, s,c,

See all my reviews

Comments about Audix CabGrabber Microphone Holder:

The audix cab grabber is functional and well designed. The "heavy-duty" spring is strong and takes some strength to put the bar in place, but once in place, it's there to stay. That being said, there are a few issues that need to be voiced, (1)The product workes great with smaller combos. I have a blues jr. and a messa nomad 1x12 and it works great. The mic can be placed anywhere from about the center to the edge of the speaker with no problem, but with larger 112 combos, there are problems, a)because the mic arm is only about 5"(from bar to the end of the mic arm) plus a mic clip (about 1")you only have about 6" from the edge of the amp to the positioned mic. I have a fender pro reverb with tilt back legs. The pro is approx. 26" wide. Center of the amp is 13"(from the edge of the amp), a 12" speaker would extend 6" from that 13" center on each side. With these measurements. the audix cab grabber would just barely be at the edge of the speaker (90 degrees on axis). b) Also the tilt back legs have to be "tilted back" for the bar to fit securely on the side of the amp(no big problem). c) Putting the bar across the top is not a good idea because of getting in the way of the control knobs. Positioned from the bottom is almost impossible. There is a SOLUTION. I use a 6" gooseneck adapted to the arm of the grabber. This gives me that additional length to place the mic well inside the diameter of the speaker, to find that "sweet spot" With the added weight of the gooseneck and the mic(I use a shure beta 58) the mic holds its position very well. The cab grabber works great with 212 combos or 412 cabs. If you use a larger 112 combo, use these simple calculations to determine the position of the mic or buy a gooseneck

(4 of 5 customers found this review helpful)

 
4.0

a graceful solution

By dlb

from PA

See all my reviews

Comments about Audix CabGrabber Microphone Holder:

Audix Cab Grabber: I've owned it about a year, using it on my Hot Rod Deville 212, and it works perfectly. I like our stage setup to be as clean looking as possible, and this cab grabber really helps, eliminating extra mic stands. This is especially helpful on cramped stages! A note to those complaining about not being able to position the mic at the center of your speaker... why in god's name would you be trying to do that? You're supposed to position the mic toward the edge of the speaker! 66% of the distance from the center is the general rule of thumb. Season to taste, but definitely not the center! I wholeheartedly recommend this item. I gave it a slight ding for "value" because the price seems a little steep, although you can easily spend alot more for a traditional mic stand, the cab grabber is a much more clean & graceful solution.

(3 of 4 customers found this review helpful)

 
1.0

useless and overpriced

By Nard

from Los Angeles

Comments about Audix CabGrabber Microphone Holder:

It doesn't fit a Marshall cabinet, which is 14" and it says it fits up to 14". Well if you stretch it real hard it will, but it won't grab right so it sits very unstable. It also doesn't work on a Fender 1x12 combo because it doesn't reach far enough to the middle. Even if it fits, you are restricted to only a few mic positions. This thing is way to expensive. The concept is great, but the measurements are wrong. I wasn't able to try it out and see if picks up the vibrations of the cabinet. I wish I had not ordered it. Now Musician's Friend is making me pay for the return shipping, on top of my disappointment. Thanks!

(3 of 3 customers found this review helpful)

 
4.0

Not bad

By Likwyd

from La Grande, Oregon

See all my reviews

Comments about Audix CabGrabber Microphone Holder:

Excellent product. Grips the Spider III cab just awesome. I think for this price, even though it was brought down $10 since I placed the order, it could at least come with a MIC CLIP! Unless I was just the unlucky one who didn't get one in the packaging. The concept of the grabber is really cool as there isn't much competition on the market but I still think, for what it's worth, it's a little overpriced.

(2 of 2 customers found this review helpful)

 
5.0

Love it!

By Dan

from Niles, MI

About Me Professional Musician

See all my reviews

Ask me a question

Pros

  • Easy To Use
  • Functional
  • Good Quality

Cons

    Best Uses

    • Concerts

    Comments about Audix CabGrabber Microphone Holder:

    I'm using mine on a 70's Silver Face Princeton Reverb and it works great. I "park" it in the open back when transporting my amp and when setting up simply pull it out & attach it to the side - no dragging an extra mic stand. I was concerned about mic placement so I also purchased a 6" goose neck. It turned out that was unnecessary as my EV RE-11 lines up just fine off axis mid cone on the single speaker. I have no worries about the strength of the spring - manufacturing is well thought out. It looks clean on stage, the sound is very accurate. There are counterfits out there and this is a bit pricey, but I really like all the features of the Audix Cab Grabber. If it'll fit your cab it is very convenient.

    (2 of 2 customers found this review helpful)

     
    1.0

    Poor quality

    By The 5505

    from Greater LA

    About Me Experienced

    See all my reviews

    Pros

    • Good idea

    Cons

    • Not Functional
    • Poor Quality

    Best Uses

    • Small Cabinet

    Comments about Audix CabGrabber Microphone Holder:

    Basically, the cab grabber didn't extend far enough to clamp on to my Sunn 4x12 cab. In addition to that, the clamps were both cracked, although they still functioned and I imagine they wouldn't break further. I'm really shocked at the poor quality of this. I expected better from both the name and from the price as well. I will be returning this. That said, I imagine that this may work on a smaller cab and be okay, but for the price and with today's competition, I expected greater than this.

    (2 of 2 customers found this review helpful)

     
    5.0

    Nice thing to have around

    By Anonymous

    from Undisclosed

    Comments about Audix CabGrabber Microphone Holder:

    I got mine a few days ago and it just clean things up. It's nice to not have to worry about tripping over the stand and then having to refind you spot. You can just set it and leave it for days and never lose your spot. Nice thing to have around for sure.

    (2 of 2 customers found this review helpful)

     
    5.0

    It works great.

    By Twanger-qYqZB

    from Northwest

    Comments about Audix CabGrabber Microphone Holder:

    I used it on a Marshall 4x12, Boogie Nomad, Fender twin and deluxe reverb. You can put a mini boom onto the standard 5/8 threads if you need to get to the center cone on some amps (usually not a good sound). Most mics you buy come with the clip that fits them and again those fit on the standard threads.

    (1 of 1 customers found this review helpful)

     
    4.0

    Good product, some hints...

    By Eddie O

    from Portola Valley, CA

    About Me Professional Musician

    See all my reviews

    Ask me a question

    Verified Reviewer

    Pros

    • Convenient
    • Easy To Use
    • Functional
    • Good Quality

    Cons

      Best Uses

      • Concerts

      Comments about Audix CabGrabber Microphone Holder:

      It's a good quality device that does what it is claimed to do: clamps onto the side or top of your amp to hold a microphone in place for stage use. I don't think placement is accurate enough for serious studio use. But the spring is strong enough for my Fender Deluxe, MojoTone "Super" cab, and Marshall JVM410C.

      Hints: place the device on the LEFT side of the amp (facing the amp); that way the swing arm hold the mic tightens DOWN, so it won't loosen due to vibrations. The mic stays put.

      Even though the indents don't fit the front of a Marshall cab (the front edge is much wider than a Fender, for example), there is a pad that holds sufficiently.

      If you have a mic like an SM57, etc. (or the Audix ones), you can get it right up to the grill cloth.If you have a Sennheiser e609 or similar that wants to lay flat, you'll need a short gooseneck to bend it in closer, and you can get the mic to be flat.

      Fender "tilt legs" like on a Twin Reverb or SuperSonic get in the way - you'll need to move them back even if you aren't tilting the cab.

      To get precise placement, remember that the swing arm doesn't need to be a right angle - you can move it around before tightening it up to get the mic pointed where you want. And a gooseneck helps that as well.

      If you cab is really deep, Audix make an "XL" model.

      I'd give it 5 stars if the clamps came in other sizes to better fit cabs with wide front bezels; if the swing arm were adjustable for length and distance.

      Displaying reviews 1-10

      Back to top

      Previous | Next »

      You are changing the Ship-To country.

      Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.