• Shop by Category
  • Hot Deals
  • Looking for Coupons? Call us

MF MD HG Backstage Pass Free Shipping 09-30-16
JBL Logo
Product 660074

JBL 2446H/J High Frequency Compression driver   

  • Write a Review

The 2446H/J is a professional quality high-frequency compression driver that incorporates JBL's newly developed Coherent Wave phasing plug as well as...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:

Features a ferrite (ceramic) magnet structure.

The 2446H/J is a professional quality high-frequency compression driver that incorporates JBL's newly developed Coherent Wave phasing plug as well as a pure titanium diaphragm with radial ribs and patented three-dimensional diamond pattern suspension.

The Coherent Wave phasing plug assembly consists of four die-cast annular aperture structures of constant path length to provide m-phase combining of diaphragm output at the driver's exit. This optimized configuration allows coherent summation of acoustical power up to much higher frequencies than afforded by earlier designs.

The diaphragm design includes JBL's exclusive three-dimensional diamond pattern surround which reduces membrane stresses in the diaphragm support structure and extends diaphragm life. The depth of the diamond pattern is closely controlled during the manufacturing process to provide predictable frequencies for the 2nd and 3rd normal resonance modes and for the basic suspension resonance mode. The diaphragm also incorporates a series of embossed radial reinforcing ribs that increase diaphragm stiffness. This diaphragm, when combined with the Coherent Wave phasing plug, increases the 2446H/J's output in the 5 kHz to 20 kHz range.

High-temperature voice coil former materials and adhesives enable the 2446H/J to handle extremely high power levels over extended periods of time. The voice coils themselves are identical to previous JBL models, so that impedance and network matching will be the same. After manufacture, the frequency response of each driver is tested for conformity to JBL's rigid performance standards.

2446H/J is ruggedly constructed to withstand the rigors of both fixed and transportable commercial applications. All cast parts and machined tolerances are held to the same levels traditionally associated with JBL designs. The JBL manufacturing process also permits the use of rim centered rather than pin mounted diaphragms, for instant interchangeability and ease of field service.

  • Ferrite (ceramic) magnet structure
  • 100 watts continuous program power handling when used above 500 Hz
  • 150 watts continuous program power handling when used above 1 kHz
  • 500 Hz to 20 kHz response
  • 8 ohm (H) or 16 ohm (J) impedance
  • 111 dB sensitivity (1W/1m on 2380A horn)
  • Coherent Wave phasing plug design for increased high-frequency output
  • 100 mm (4") pure titanium diaphragm with radial-rib topology
  • 100 mm (4") edgewound aluminum voice coil

2446H/J High Frequency Compression driver

  • Throat Diameter: 49 mm (2 in)
    Nominal Impedance: 2446H 8 ohms
    2446J 16 ohms
    Minimum Impedance: 6 ohms (H), 12 ohms (J) @ 5 kHz
    DC Resistance: 4.3 ohms (H), 8.5 ohms (J) +/- 10% @ 25C
    Power Capacity: 100 W continuous program above 500 Hz
    150 W continuous program above 1 kHz
    Sensitivity: 111 dB SPL, 1 W @ 1 m on-axis on horn
    118 dB SPL, 1 mW on plane-wave tube
    Nominal Efficiency: 30% (500 Hz to 2.5 kHz)
    Frequency Range: 500 Hz to 20 kHz
    Recommended Crossover: 500 Hz or higher, 12 dB/octave minimum
    Diaphragm: 0.05 mm (0.002 in) pure titanium
    Voice Coil Diameter: 100 mm (4 in)
    Voice Coil Material: Edgewound aluminum ribbon
    Flux Density: 1.9 T (19,000 gauss)
    Bl Factor: 12.7 (H) N/A, 18 (J) N/A
    Positive voltage to black terminal gives diaphragm motion toward the phasing plug
    Dimensions: 235 mm (9-1/4") diameter
    131 mm (5") depth
    Mounting: Four 1/4-20 threaded holes, 90 apart on 101.6 mm (4") diameter
    Net Weight: 13.8 kg (30.5 lb)
See All JBL Replacement PA Speakers
Ship To: US Flag
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.