- 430582 000000000 430582000000000
Primacoustic KickStand Mic Boom Isolator
- Write a Review
The Primacoustic KickStand heavy microphone boom-arm isolator combines a massive stabilizing base with an isolation pad that eliminate resonance ente...Read More
Reduces disruptive floor, stage or drum riser resonance and noise from entering mics.
The Primacoustic KickStand heavy microphone boom-arm isolator combines a massive stabilizing base with an isolation pad that eliminate resonance entering the microphone from stages, drum risers or studio floors.
A common problem with bass guitar and kick drum is resonance on a live stage. This is generally caused by low frequencies coupling with the wood flooring which will combine with the instrument at certain frequencies and generate unwanted peaks and valleys.
Another problem is the physical vibration from the kick drum pedal and low-end from the PA system that causes the drums to rattle and transmit through the drum riser. Microphones that are near these sources are prone to picking up these unwanted sounds. The KickStand helps eliminate the problem by decoupling the microphone stand from the stage while introducing a stabilizing mass to hold the microphone firmly in place.
The Primacoustic KickStand isolator's thick, high-density open cell acoustic foam covers the entire bottom plate. An innovative laser cut steel platform is wedg' shaped to eliminate standing waves while offering sufficient height to allow a boom-arm to be articulated into the ideal position. The isolation eliminates the resonance while the added mass stabilizes the microphone capsule for greater clarity and improved transient response.
Although originally developed for bass drum, the KickStand is very effective on electric guitar, bass and other instruments that generate low frequencies or may be subject to floor resonance from entering the mic via the microphone stand.
- Combination boom-stand base and vibration isolator
- Eliminates disruptive resonance from the microphone stand
- Improves transient response of the microphone
- Makes getting the sound you want fast and mixing easier
KickStand Mic Boom Isolator
- Base Material: High density open cell foam
Stabilizing Plate Material: Laser cut 1/4" steel
Powder coated black textured finish
Reviewed by 1 customer
Displaying review 1
- Easy To Use
- Good Quality
- Improves Sound
Comments about Primacoustic KickStand Mic Boom Isolator:
Prior to purchase, looking at the photo of this stand on Musician's Friend website, I was unsure of the stability, contrary to the company's statement of rugged build quality. For that reason, I purchased an Atlas mini boom arm w/ counterweight just in case it had a tendency to tip over during use (it is holding an EV RE320 microphone which is quite heavy and bulky. Upon unboxing, first thing that was apparent to me was the company's understatement of just how sturdy this stand is....the cast metal base is very heavy and designed in such a way that the weight of a microphone is balanced by the design itself. Very clever. The isolating foam is thick and firm, and I can tell it will withstand years of use (although I would be careful not to expose the base to moisture). Overall quality exceeds my expectations. As for buying that Atlas boom arm with the counterweight, well, as they say, you can never be too prepared, but in actuality, it is totally unnecessary with this stand. Any boom arm here would be more than sufficient considering the sturdiness of the base. The foam does a perfect job of eliminating low end floor rumble from the microphone, leaving the sound pure and unaltered. I am very happy with this purchase, and will definitely be buying other Primacoustic sound isolating foam products.