- H70862 000000000 H70862000000000
Primacoustic RX20-HF Far-Field/Sub Recoil Stabilizer - Horizontal Fire
- Write a Review
Designed for nearfield monitors, the Primacoustic Recoil Stabilizer is a unique speaker mounting device that at once eliminates disruptive resonant c...Read More
Designed for nearfield monitors, the Primacoustic Recoil Stabilizer is a unique speaker mounting device that at once eliminates disruptive resonant coupling from the loudspeaker to the stand, while providing a stable base that reduces the recoil caused by the forward energy of the loudspeaker motion.
The Recoil Stabilizer is a loudspeaker platform that combines three basic components: a high-density urethane foam base to isolate the speaker from the shelf, monitor-bridge or stand; a heavy &frac1/4" laser-cut steel plate; and a thin neoprene top surface. The foam effectively decouples the loudspeaker to eliminate vibration-borne resonance that invariably introduces phase anomalies, while the steel plate introduces significant mass to the structure, stabilizing the speaker. The no-slip surface coats the top to ensure the monitor stays firmly in place.
By reducing the backward 'recoil' as the speaker coil pushes energy forward, the initial transient no longer suffers lag and the sharpness of the resulting impulse is more defined. Upon first listening, one immediately notices more punch and extended low end. Upon further listening, one begins to notice greater detail at all frequencies, improved transient response and more defined depth of field. This not only makes mixing easier, but since the Recoils eliminate unknown resonance from contaminating the sound, your mixes immediately translate better to other rooms and audio systems.
Prevents unwanted resonance from contaminating your sound.
- Improves transient response and imaging
- Tightens up the bass for greater accuracy
- Eliminates resonance and phase anomalies
- Improves translation to other audio systems
A cost-effective way to improve your tracks!
RX20-HF Far-Field/Sub Recoil Stabilizer - Horizontal Fire
- Fire angle: horizontal
- Height 2.625" (67.5mm)
- Width: 20" (508mm)
- Depth: 22" (559mm)
- Load limit: 144 lb. (65kg)