- Product 583005
Pro Co Lifelines Right Angle 15 Foot 6-Pack
- Write a Review
This Pro Co Instrument Cable's construction is based on transmission line theory. In a nutshell, using a 4-conductor microphone cable to replace a si...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
A pack of 6 guitar-to-amplifier instrument line cables that reduce both signal noise and single-coil pickup noise.
This Pro Co Instrument Cable's construction is based on transmission line theory. In a nutshell, using a 4-conductor microphone cable to replace a single-conductor guitar cable, Pro Co solders the cable's two red conductors (red and red with white stripe) to the tip on either plug, and then solders the cable's two black conductors (black and black with white stripe) to the ground on either plug. Pro Co then solders the shield to the ground on the amplifier end and lifts the ground (do not solder) on the instrument end. This helps to shunt most of the noise that jumps on the shield to chassis ground before it becomes part of the signal path.
This defends the world from guitar players with noisy single-coil pickups and helps quiet them (the pickups; not the guitar players) down to a usable commodity before the drummer shoots the guitar player. The white, right angle end of the audio cable goes into the guitar and the black, straight end of the cable goes into the amplifier.
When nothing can be left to chance, and when you use a noisy single-coil pickup to get your guitar's sound, you'll want to buy these Pro Co Lifelines Line Instrument Cables.
- Model: LLCL - (length)
- Connector A: G&H Industries straight 1/4" phone plug (6.35mm)
- Connector B: G&H Industries male right angle 1/4" phone plug (6.35mm)
- Wire: 424BXXK, .295" O.D., 96% braid shield
- Speaker gauge: 24 AWG
- Assembly method: solder
- Made in the USA