• Gift Certificate
  • Track Order
  • Help
  • Feedback [+]
  • Ship To: US Flag
  • Shop All Categories
  • Hot Deals

MF MD HG Exclusives 09-19-14

DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration  

  • Write a Review
Product #H75867

We're sorry—this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Similar Items:
  • TC Helicon VoiceLive 3
    TC Helicon VoiceLive 3 $799.99
  • Boss ME-80 Guitar Multi-Effects Pedal
    Boss ME-80 Guitar Multi-Effects Pedal $299.00
  • Roland GR-55 Guitar Synthesizer
    Roland GR-55 Guitar Synthesizer $799.00
  • See All DigiTech Floor Guitar Effects
    DigiTech

    Combines the simplicity of a pedalboard with the flexibility of a multi-effects via your iPad.

    The Digitech iPB-10 Programmable Pedalboard with iPad Integration sets a new standard for guitar signal processing. By harnessing the power of the iPad®, it combines the simplicity of a pedalboard with the flexibility of a multi-effects. The iPB-10 unleashes the ability to create and control guitar effects like never before. (iPad® not included).

    Pedalboard Simplicity
    The iPB-10 allows you to create your ultimate pedalboard, all on your iPad. Design a pedalboard by simply dragging and dropping up to 10 different pedals, in any order, to each pedalboard. You can even add an amp and cabinet to each setup. With 87 different pedals, 54 amps, and 26 cabinets to choose from, your options are virtually unlimited. Simply swipe your finger across the iPad to rearrange your pedals, turn them on and off, or to adjust their knobs.

    Multi-effects Flexibility
    Traditional multi-effects have given you the flexibility to change the entire configuration of your signal chain with a single footswitch. The iPB-10 brings the concept of presets to a pedalboard. This allows you to save 100 of your favorite pedalboards with the touch or your finger, and instantly recall them with the stomp of your foot. You can have a different pedalboard for each gig, set, song, or even switch pedalboards within a song.

    Once you experience the flexibility of the iPB-10 Programmable Pedalboard with its drag and drop design, you will change the way you think about guitar effects forever.

    iPB-Nexus App for iPad
    The iPB-Nexus app is the perfect way to build and control your pedalboard. Using the simple and intuitive touch screen controls of the iPad, iPB-Nexus makes designing your setup for the iPB-10 Programmable Pedal board easy. Add, arrange, and adjust your pedals with a few simple gestures of your finger.

    Drag and Drop Pedalboard Builder
    The iPB-Nexus app for the iPad gives you touch screen control of your pedals, amps, and cabinets. Simply drag and drop your choice of 87 different pedals to your pedalboard. Select an amp and a cabinet to make your setup complete. Using the iPB-Nexus app to control your iPB-10, it’s never been easier to explore your tone and find just the right sound.

    My Tones Library
    The iPB-Nexus app includes the My Tones library where you store, organize, and rate all your favorite presets. My Tones allows you to store an unlimited number of presets and group them any way you want. For example, you can make preset lists for certain sets or specific music genres. This makes setting up before a show a snap. With My Tones, you can have a different pedalboard for each gig, set, song, or even switch pedalboards within a song.

    Real-Time Pedalboard View
    Running the iPB-Nexus app on the iPad offers a stunningly clear display of your entire pedalboard. You get a real-time view of your pedals, amp, and cabinet. You can easily and quickly see if a pedal is on or off, where its knobs are set, and which footswitch it is assigned to. With the iPB-Nexus real-time pedalboard view, you can take your mind off your gear and focus on your sound, the crowd, and your performance.

    87 Pedals
    Product names modeled in this product are trademarks of their respective companies that do not endorse and are not associated or affiliated with DigiTech. Scroll down for complete information.
    Wah:
    DigiTech® Full Range
    Dunlop® Cry Baby™ Wah
    Vox® Clyde McCoy™ Wah
    Compression:
    Boss® CS-2 Compressor/Sustainer
    DigiTech® Compressor
    MXR® Dynacomp™
    Noise Gate:
    DigiTech® Auto Swell Gate
    DigiTech® Noise Gate
    Distortion:
    Arbiter® Fuzz Face
    Boss® DS-1 Distortion
    Boss® MT-2 Metal Zone®
    Boss® OD-1 Overdrive
    Boss® SD-1 Overdrive
    DOD® 250 Overdrive/Preamp
    DOD® Classic Fuzz™
    DOD® Gonkulator Ring Modulator
    Demeter™ Fuzzulator™
    DigiTech® Amp Driver
    DigiTech® Death Metal™
    DigiTech® Grunge®
    DigiTech® Redline Overdrive
    Electro-Harmonix® Big Muff Pi®
    Guyatone Overdrive OD-2
    Ibanez® Modified TS-9
    Ibanez® TS-808 Tube Screamer™
    Ibanez® TS-9 Tube Screamer™
    MXR® Distortion +
    ProCo Rat™
    Roger Mayer Octavia
    Voodoo Labs Sparkle Drive
    Chorus:
    Boss® CE-2 Chorus
    DigiTech® Dual Chorus
    DigiTech® Glistening Chorus
    DigiTech® Multi-Chorus
    Electro Harmonix® Small Clone
    TC Electronics® Chorus
    Voodoo Labs Analog Chorus
    Flanger:
    ADA™ Flanger
    DigiTech® Filter Flanger
    DigiTech® Flanger
    DigiTech® Triggered Flanger
    Electro Harmonix® Electric Mistress™
    MXR® Flanger
    Phaser:
    DigiTech® Phaser
    DigiTech® Triggered Phaser
    Electro Harmonix® Small Stone™
    MXR® Phase 100
    Pitch:
    Boss® OC-2 Octaver™
    DigiTech® Detune
    DigiTech® Harmony Pitch
    DigiTech® Pitch Shift
    DigiTech® Whammy™
    Vibrato/Rotary:
    DigiTech® Panner
    DigiTech® Rotary
    DigiTech® Vibrato
    DigiTech® Vibro / Pan
    Unicord Uni-Vibe™
    Tremolo:
    DigiTech® ScatterTrem – Dual tremolo
    DigiTech® Tremolo
    Fender® Opto Tremolo™
    Vox® Bias Tremolo
    Envelope:
    DOD® FX25 Envelope Filter
    DigiTech® Auto Yah™
    DigiTech® Envelope Filter
    DigiTech® Sample & Hold
    DigiTech® Step Filter
    DigiTech® Synth Talk™
    DigiTech® YaYa™
    EQ:
    3-Band EQ
    Delay:
    2-Tap Delay
    Analog Delay
    Boss® DM-2 Analog Delay
    Digital Delay
    Lo Fi Delay
    Maestro™ Echoplex EP-2
    Modulated Delay
    Pong Delay
    Reverse Delay
    Tape Delay
    Reverb:
    EMT® 240 Plate Reverb
    Fender® Twin Spring Reverb™
    Lexicon® Ambience
    Lexicon® Hall
    Lexicon® Room
    Lexicon® Studio
    Volume:
    Volume Pedal

    Features
    • Drag and drop pedalboard design
    • Arrange pedals in any order
    • Touch screen control
    • 87 pedals
    • 54 amps
    • 26 cabinets
    • Drag and drop footswitch assignment
    • Real-time view of pedal settings with direct access to pedal control
    • Up to 10 pedals, 1 amp, and 1 cabinet can be added to a setup
    • Unique setup assignable to each preset
    • Infinite number of presets, 100 footswitch accessible
    • Store, organize, and rate presets using My Tones library

    Put your iPad to great use. Order today.

     

    iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration Specifications:

    • USB Type: Part B
    • Chassis: Durable Cast Metal Construction
    • A/D Converter: 24-bit high performance audio
    • Sample Rate: 44.1 kHz
    • DSP Section: 2 x Audio DNA2™ DSP Processor
    • Preset Memory: 100 User/Factory Presets with virtually unlimited storage within app
    • Power Supply: PS0920DC-01
    • iPB-10 Rear Panel Features
    • 1/4” guitar input
    • 1/4" amp loop with ground lift switch
    • 1/4" effects loop
    • Stereo 1/4" line output with Amp/Mixer switch
    • Output level
    • Stereo XLR outputs with ground lift switch
    • 1/8” headphone output
    • 1/4" external footswitch control
    • USB port for audio streaming
    • DC power input
    • Power switch
    Customer Reviews
    Loading....

    Review Snapshot®

    by PowerReviews
    DigiTechiPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration
     
    4.2

    (based on 13 reviews)

    Ratings Distribution

    • 5 Stars

       

      (8)

    • 4 Stars

       

      (3)

    • 3 Stars

       

      (0)

    • 2 Stars

       

      (1)

    • 1 Stars

       

      (1)

    67%

    of respondents would recommend this to a friend.

    Pros

    • Versatile (5)
    • Excellent sound quality (4)
    • Good selection of effects (4)
    • Compact (3)
    • Responsive (3)

    Cons

      Best Uses

      • Home studio (5)
      • Amateur recording (4)
      • Outdoor events / games (3)
      • Performances (3)
      • Professional recording (3)
        • Reviewer Profile:
        • Experienced (3)

      Most Liked Positive Review

       

      Press and hold current preset to get to tuner

      Love it! this IS the future. All the benefits of a multi-pedel without giving up the ability to see your pedels at a glance and tweek on the fly.

      Couple of...Read complete review

      Love it! this IS the future. All the benefits of a multi-pedel without giving up the ability to see your pedels at a glance and tweek on the fly.

      Couple of things that are not real clear;
      1. Amp & Stomp buttons are only used with externaly looped stuff. These buttons do not disengage modeled stomps or amps.

      2. The Spec sheet is WRONG! The unit is Not 10.75 inches deep. (it's more like 13") SKB-SC2311 will not work! I have an SC2316 on the way.
      TUNE IS accessable by foot. (You reviewers Really need to pay attention)
      Just press and hold the current preset and the tuner comes on. Pretty logical.

      Had it now for a few weeks. Impressed with sound quality. Interface is what we've all been waiting for.
      Very well built. I think I'd prefer quiet buttons (like Line6), these have a pretty loud click but I can get used to it.
      More pedals than you would ever buy!
      I Look forward to a 'tap tempo' update. (giving an alt purpose for one of the later mentioned buttons)

      VS

      Most Liked Negative Review

       

      Follow-Up Review 07/30/2012

      I finally found a bag that will somewhat fit this item. Dimensions vary depending on which website you visit. SKB has an affordable one only available at their site (1SKB-SC2111), and states...Read complete review

      I finally found a bag that will somewhat fit this item. Dimensions vary depending on which website you visit. SKB has an affordable one only available at their site (1SKB-SC2111), and states the Digitech RP1000 will fit (same dimensions as the iPB-10), but even it's a poor match. Therefore, what I did was remove the core insert (screws), peel off the carpet (glue), and cut the foam down for an exact fit. Put the carpet back on, and re-inserted it. Still snug, but a little effort and it goes in, and well protected. iPad will fit in the front pocket. In addition, CableJive.com has a 30-pin 6-foot extension cable for the iPad. What I have is the third generation (iPad 3), so these issues are not related to what others had with the iPad 1.

      The following is a follow-up review after having owned the Digitech iPB-10 since July 2012.

      A) Biggest complaint that will probably kill the device: Digitech (iPB-Nexus) has been unable to keep up with the iOS updates on the iPad. Apple pushed iOS 6 updates December 2012, and the iPB-Nexus app would not synchronize with the hardware at all. They scurried to get an update out while everyone was down, and wondering what happened. Everyone on the forums was screaming for support. They did provide a fix finally, but it crashes frequently (at startup), sometime doesn't synchronize, stops responding (to preset changes and effects on/off), NOW has a huge delay while switching presets (3-4 seconds vice immediately), keyboard disappears randomly (to rename presets), and unless you have a bluetooth keyboard you have to reboot the iPad to get it back. Now Apple has updated again to iOS 6.2 (February 2013), so a new wave of issues has probably arisen. I've uninstalled app, rebooted iPad, re-installed app, and done a hard-reset on the iPB-10 probably five times in the seven months I've had it. It's worse than trying to get drivers to work in Windows 95.

      From what I have read on the forums, there is only one man working on the app. He gets the code from Apple stating what changes they will make to the iOS, and app developers are supposed to study it to see if their apps will be affected by the update. If so, be ready to push updates to the app just after the iOS update comes out. However, apparently he's too busy working on other Digitech projects to care until a mob is banging down his door. I would expect them to drop support for this device soon, which is probably why Musician's Friend is now offering incentive packages to sell their remaining stock.

      B) Four-Cable Method works when you can get it to work. You have to plug it up in a specific sequence to allow the device to realize what you are doing. I did the inputs/outputs first, then effects loop second, and the device just hummed. You have to follow the 1-2-3-4 sequence as stated in the manual.

      Compressors: seem to kill your tone (clean or distortion).
      Distortions: you will probably only use the Tube Screamer. All others just sound like modified fuzzes. Even the DOD/Digitech distortions are off.
      Modulations: good quality.
      Delays: good quality.
      Reverbs: excellent quality.

      I primarily use the device using the four-cable method for "effects only" into my Krank Rev Pro Jr. I do not use the amps/cabinets included. You can set it up using a two-cable method where your output goes into the effects return only (bypassing your preamp stage) using your power amp stage only. This way you can utilize the onboard amps/cabinets, but they all sound too digital compared to its real counterpart. In addition, you cannot choose an amp without a cabinet. By default, it gives you the amp's matched cabinet, but you can change it. The amps sound like someone really sat down and tried to get them as close as possible to the real amp. But in no way are they as close as impulse responses (IR's) are though. If that is your thing, go with Kemper or Axe-FX II. The cabinets sound like someone just mic'd a cabinet and put extreme equalization tweaks on the same capture to create new cabinets.

      C) I was glad to see that they added a tap-tempo, but it is difficult to enable, set, and then disable while in the middle of a song. You have to hold down the delay switch for two seconds, wait for it to enable, adjust tap-tempo, and then hold down the delay switch again for two seconds to get back to on/off function. Anything short of exact procedures will mess up the bpm. I would have liked to have see them re-route the external effects loop on/off switch as a dedicated (always-enabled) tap-tempo. I do not see why you would need external effects anyway. This thing is supposed to replace your pedals. I've never seen anyone put a multi-effects unit in their pedalboard's signal path.

      D) I do not like the touch-sensitive expression pedal switch. It is not a hard switch like on a real wah pedal. I know you can adjust the sensitivity, but it seems to re-calibrate itself. I get to rockin' with wah on, and get a little too crazy with it, and I soon hear volume swells instead of wah, because when wah is off it's a volume pedal by default (or whatever you assign it to be).

      E) This thing is noisy if the noise gate is off, and you'll most likely find every preset has the noise gate on full. That's great, but the sensitivity is useless. Roll off your guitar volume from crunch to get a gritty sound, and the noise gate starts clipping your sound (and that's with active humbuckers).

      F) Hooking this up to my DAW is simple, but the device will slowly start to add more and more latency until you shut it down and reboot the iPad, re-launch app, and try again, but you can definitely get one or two tracks down before that starts happening. I've tried shutting everything down on the iPad that is not used (Push Notifications, Wireless, Cellular, Bluetooth, etc) to free up some resources, but that did nothing to improve the latency.

      G) The XLR connections on the back are oversized. Someone said I had cheap XLR cables, and to try a better brand. So I took the item to Guitar Center with me and tried out all the cables. Nothing seems to provide a tight fit except to wrap a rubber gasket around the female tip to make it a firm fit. When they're loose like they are, the connections are weak and cause signal loss. I also tested the cables in my microphones, and they're not loose, so the XLR outputs on the device are too big.

      H) Last thing, all the preset's master output is set to 50%. There should be a global way to change the volume output without having to go into each preset, raise the output volume, and save preset. The output volume knob on the back is 100%, so don't think I don't know about that.

      That's about all I can think of right now, which is not good if you go back and look at the expectations this device and it's support team promised. This is generic emulation, much like Digitech's history with multi-effects processors. I'm sure everyone that doesn't have an iPad would like to have this. But those of us that do have one are sorry we shelled out another five hundred pesos to Digitech. I should have learned my lesson back in the day of the GSP 21 Pro (first multi-effects device that included a non-midi foot controller).

      Reviewed by 13 customers

      Sort by

      Displaying reviews 1-10

      Back to top

      Previous | Next »

      (1 of 1 customers found this review helpful)

       
      1.0

      DigiTech has Deserted this gear.

      By Gear Adrift

      from Virginia

      About Me Novice

      Pros

      • Excellent Sound Quality
      • Good Selection Of Effects
      • Versatile

      Cons

      • Doesn't Work After Update
      • No Support
      • Orphaned By Digitech

      Best Uses

      • Amateur Recording
      • Doorstop
      • Paperweight

      Comments about DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration:

      Modeler was one of the best out there. Billed by Digitech as the Flagship of their line and big plans for future growth. Since the last iOS update, the Nexus app has been unreliable and buggy, constantly disconnecting from the pedal. DigiTech refuses to fix the communications problems between the iPad app and the pedal.

      You can use the pedal without the app, but you cannot edit any of the parameters in your patches without the app.

      Comment on this review

      (3 of 3 customers found this review helpful)

       
      2.0

      Follow-Up Review 07/30/2012

      By Robert

      from Fort Worth, Texas

      About Me Experienced

      Pros

      • Compact Design
      • Four-cable Method

      Cons

      • Customer Support
      • Ipb-nexus App
      • Not Responsive
      • Poor Sound Quality
      • Unreliable Or Crashes

      Best Uses

      • Amateur Recording
      • Home Studio

      Comments about DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration:

      I finally found a bag that will somewhat fit this item. Dimensions vary depending on which website you visit. SKB has an affordable one only available at their site (1SKB-SC2111), and states the Digitech RP1000 will fit (same dimensions as the iPB-10), but even it's a poor match. Therefore, what I did was remove the core insert (screws), peel off the carpet (glue), and cut the foam down for an exact fit. Put the carpet back on, and re-inserted it. Still snug, but a little effort and it goes in, and well protected. iPad will fit in the front pocket. In addition, CableJive.com has a 30-pin 6-foot extension cable for the iPad. What I have is the third generation (iPad 3), so these issues are not related to what others had with the iPad 1.

      The following is a follow-up review after having owned the Digitech iPB-10 since July 2012.

      A) Biggest complaint that will probably kill the device: Digitech (iPB-Nexus) has been unable to keep up with the iOS updates on the iPad. Apple pushed iOS 6 updates December 2012, and the iPB-Nexus app would not synchronize with the hardware at all. They scurried to get an update out while everyone was down, and wondering what happened. Everyone on the forums was screaming for support. They did provide a fix finally, but it crashes frequently (at startup), sometime doesn't synchronize, stops responding (to preset changes and effects on/off), NOW has a huge delay while switching presets (3-4 seconds vice immediately), keyboard disappears randomly (to rename presets), and unless you have a bluetooth keyboard you have to reboot the iPad to get it back. Now Apple has updated again to iOS 6.2 (February 2013), so a new wave of issues has probably arisen. I've uninstalled app, rebooted iPad, re-installed app, and done a hard-reset on the iPB-10 probably five times in the seven months I've had it. It's worse than trying to get drivers to work in Windows 95.

      From what I have read on the forums, there is only one man working on the app. He gets the code from Apple stating what changes they will make to the iOS, and app developers are supposed to study it to see if their apps will be affected by the update. If so, be ready to push updates to the app just after the iOS update comes out. However, apparently he's too busy working on other Digitech projects to care until a mob is banging down his door. I would expect them to drop support for this device soon, which is probably why Musician's Friend is now offering incentive packages to sell their remaining stock.

      B) Four-Cable Method works when you can get it to work. You have to plug it up in a specific sequence to allow the device to realize what you are doing. I did the inputs/outputs first, then effects loop second, and the device just hummed. You have to follow the 1-2-3-4 sequence as stated in the manual.

      Compressors: seem to kill your tone (clean or distortion).
      Distortions: you will probably only use the Tube Screamer. All others just sound like modified fuzzes. Even the DOD/Digitech distortions are off.
      Modulations: good quality.
      Delays: good quality.
      Reverbs: excellent quality.

      I primarily use the device using the four-cable method for "effects only" into my Krank Rev Pro Jr. I do not use the amps/cabinets included. You can set it up using a two-cable method where your output goes into the effects return only (bypassing your preamp stage) using your power amp stage only. This way you can utilize the onboard amps/cabinets, but they all sound too digital compared to its real counterpart. In addition, you cannot choose an amp without a cabinet. By default, it gives you the amp's matched cabinet, but you can change it. The amps sound like someone really sat down and tried to get them as close as possible to the real amp. But in no way are they as close as impulse responses (IR's) are though. If that is your thing, go with Kemper or Axe-FX II. The cabinets sound like someone just mic'd a cabinet and put extreme equalization tweaks on the same capture to create new cabinets.

      C) I was glad to see that they added a tap-tempo, but it is difficult to enable, set, and then disable while in the middle of a song. You have to hold down the delay switch for two seconds, wait for it to enable, adjust tap-tempo, and then hold down the delay switch again for two seconds to get back to on/off function. Anything short of exact procedures will mess up the bpm. I would have liked to have see them re-route the external effects loop on/off switch as a dedicated (always-enabled) tap-tempo. I do not see why you would need external effects anyway. This thing is supposed to replace your pedals. I've never seen anyone put a multi-effects unit in their pedalboard's signal path.

      D) I do not like the touch-sensitive expression pedal switch. It is not a hard switch like on a real wah pedal. I know you can adjust the sensitivity, but it seems to re-calibrate itself. I get to rockin' with wah on, and get a little too crazy with it, and I soon hear volume swells instead of wah, because when wah is off it's a volume pedal by default (or whatever you assign it to be).

      E) This thing is noisy if the noise gate is off, and you'll most likely find every preset has the noise gate on full. That's great, but the sensitivity is useless. Roll off your guitar volume from crunch to get a gritty sound, and the noise gate starts clipping your sound (and that's with active humbuckers).

      F) Hooking this up to my DAW is simple, but the device will slowly start to add more and more latency until you shut it down and reboot the iPad, re-launch app, and try again, but you can definitely get one or two tracks down before that starts happening. I've tried shutting everything down on the iPad that is not used (Push Notifications, Wireless, Cellular, Bluetooth, etc) to free up some resources, but that did nothing to improve the latency.

      G) The XLR connections on the back are oversized. Someone said I had cheap XLR cables, and to try a better brand. So I took the item to Guitar Center with me and tried out all the cables. Nothing seems to provide a tight fit except to wrap a rubber gasket around the female tip to make it a firm fit. When they're loose like they are, the connections are weak and cause signal loss. I also tested the cables in my microphones, and they're not loose, so the XLR outputs on the device are too big.

      H) Last thing, all the preset's master output is set to 50%. There should be a global way to change the volume output without having to go into each preset, raise the output volume, and save preset. The output volume knob on the back is 100%, so don't think I don't know about that.

      That's about all I can think of right now, which is not good if you go back and look at the expectations this device and it's support team promised. This is generic emulation, much like Digitech's history with multi-effects processors. I'm sure everyone that doesn't have an iPad would like to have this. But those of us that do have one are sorry we shelled out another five hundred pesos to Digitech. I should have learned my lesson back in the day of the GSP 21 Pro (first multi-effects device that included a non-midi foot controller).

      Comment on this review

      (1 of 2 customers found this review helpful)

       
      5.0

      Great, but needs a carry case!

      By PaoloNYC

      from New York City

      About Me Experienced

      Pros

      • Excellent Sound Quality
      • Good Selection Of Effects
      • Huge Range Of Sounds
      • Versatile

      Cons

        Best Uses

        • Amateur Recording
        • Events
        • Home Studio
        • Professional Recording

        Comments about DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration:

        I own this. Per the prior reviews, it's an amazingly versatile unit. But the lack of a carry case is a serious omission. This is heavy equipment, and no matter how robust its construction it needs a protective case to be gigged with. I'm having a very hard time finding a case to fit - pedalboard cases too small, keyboard cases too large. If anyone has a solution, please post it here. And as one prior reviewer notes, the spec sheet is wrong which doesn't help.

        Comment on this review

        (2 of 2 customers found this review helpful)

         
        4.0

        Some reviewers did speak truth!

        By Stratman-7XPDx

        from Shanghai, China

        About Me Professional Musician

        Ask me a question

        Verified Reviewer

        Pros

        • Easy To Change Settings
        • Good Advance In Effects
        • Responsive
        • Versatile
        • Works Well With Ipad2

        Cons

        • Heavy
        • Limited Selection Of Effects
        • Needs Suitable Case
        • Problems With Ipad1

        Best Uses

        • Home Studio
        • Performances
        • Professional Recording

        Comments about DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration:

        Pros: Contains useable, when adjusted tones that can be used in different settings (Gigs).

        Cons: Needs suitable carrying case - I use a Road Runner hardshell case.

        Comments:
        1) Actual size is 3-⅛ inch X 9-½ inch X 15-½ inch (11mm X 32.5mm X 52.5mm)

        2) Works really well with 4CM system. (Four cable method)

        3) Can use with 30 pin cable extension

        4) Needs better Digitech support and system upgrades.

        5) Needs better means to import settings from other users.

        6) Needs a user forum for exchanging settings.

        I use this with a smaller 15 watt Egnater Tweaker head/cabinet amp for in-house setting up of different tone (e.g., amp cabinet, & pedal) settings, and a Marshall DSL40C amp for barroom gigs. (Guitars are Stratocasters and Les Pauls)

        Set-up uses 4CM method as well as pedal send/return to a Voodoo Lab GCX / Ground Control Pro - with 7 pedals loaded.

        Retired my Eleven Rack and may soon retire the Voodoo Lab gear as well...

        Also output is feed in to the PA system so that the sound girl can mix with the rest of the band.

        Music ranges from 60, 70, early 80 rock, early metal, blues, jazz, and current hits.

        I have already recommended it to friends who have also purchased it.

        Comment on this review

        (3 of 3 customers found this review helpful)

         
        5.0

        Awesome Pedal

        By Airplai

        from Kingston, Jamaica

        About Me Professional Musician

        Verified Reviewer

        Pros

        • Compact Design
        • Excellent Sound Quality
        • Good Selection Of Effects
        • Responsive
        • Versatile

        Cons

          Best Uses

          • Events
          • Home Studio
          • Performances
          • Professional Recording

          Comments about DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration:

          I own the Boss GT6 for the last 8 years and it serves me well. I decided to upgrade to the iPB10 well i heard the Demos online. I totally recommend this device. Digging deep into the software and understanding the limitations of each stomp box will allow you to create great sounding tones. I use this pedal on Bass, Acoustic Guitar and Electric Guitar; all sounding amazing. Thanks Digitech. I recommend this one, Get it!

          Comment on this review

          (3 of 9 customers found this review helpful)

           
          5.0

          Should include a case/bag.

          By Robert

          from Fort Worth, Texas

          About Me Experienced

          Pros

          • 4 cable method setup
          • Compact Design
          • Excellent Sound Quality
          • Good Selection Of Effects
          • Responsive
          • Rugged
          • Simplicity
          • Versatile

          Cons

          • No protective bag
          • No tap tempo

          Best Uses

          • Amateur Recording
          • Events
          • Home Studio
          • Performances

          Comments about DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration:

          When searching for a protective case/bag I could not find one to match the dimensions. Gator cases has a few that are close, but a tad too small. The IPB-10 has a unique shape and they should have included it for the price of this thing. Overall, it's a great unit minus the no tap tempo. I would guess they'll try to add it on the next unit or maybe put out a new firmware.

          Comment on this review

          (4 of 4 customers found this review helpful)

           
          4.0

          Great investment

          By John Price

          from Georgia

          Comments about DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration:

          Overall, it's a great product. I've been waiting for something like this to come out and when I saw the demo for it I knew I had to have it. The flexibility of a multieffects processor with the simplicity of an iPad.
          Tons of features with this thing. I love the iPad as an interface with the board, the touch screen makes it so much more simple to manipulate. I've had programmable boards in the past and they took much more time to navigate. The pedals are very realistic, I've owned some of the ones that are represented and they sound and tweak out exactly the same as the real thing. The amp models are impressive and the quality of achievable sounds rivals the line 6 pod.
          This thing is built solid. Only one complaint, I wish the iPad connector had an extension so that u could put it on a stand while programming.
          This is an awesome product and worth the investment, however I do think it's slightly overpriced compared to its competitors. And you throw in the iPad u got quite a chunk of change.

          Comment on this review

          (5 of 5 customers found this review helpful)

           
          5.0

          Press and hold current preset to get to tuner

          By Myestro-O8slN

          from St Louis

          Comments about DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration:

          Love it! this IS the future. All the benefits of a multi-pedel without giving up the ability to see your pedels at a glance and tweek on the fly.

          Couple of things that are not real clear;
          1. Amp & Stomp buttons are only used with externaly looped stuff. These buttons do not disengage modeled stomps or amps.

          2. The Spec sheet is WRONG! The unit is Not 10.75 inches deep. (it's more like 13") SKB-SC2311 will not work! I have an SC2316 on the way.
          TUNE IS accessable by foot. (You reviewers Really need to pay attention)
          Just press and hold the current preset and the tuner comes on. Pretty logical.

          Had it now for a few weeks. Impressed with sound quality. Interface is what we've all been waiting for.
          Very well built. I think I'd prefer quiet buttons (like Line6), these have a pretty loud click but I can get used to it.
          More pedals than you would ever buy!
          I Look forward to a 'tap tempo' update. (giving an alt purpose for one of the later mentioned buttons)

          Comment on this review

          (1 of 2 customers found this review helpful)

           
          5.0

          Digitech IPB-10

          By Rudy Capistrano

          from Guam USA

          Comments about DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration:

          Overall great product and utililzation of the ipad's interface. First things first, NOTHING can subsitute the feel of a real tube amp as opposed to amp sims, or any other digital recreation. I haven't tried an AxeFX, so, hence my basis for this review. As for a gigging musician that plays covers, this product will offer you tons of tones, plug in direct to the PA with the XLR outs, great sounds! If you need to monitor yourself, plug in another tube amp in addition to going direct through the PA! This unit is very flexible with connectivity options for a gigging musician, go direct, go with an amp, do both, use a pedal board in front of the amp, 4 cable method, all is in there!! CAVEAT...application crashes often when using iPad1!!! When used with iPad2, STABLE, STABLE, STABLE, in gigging situations cycling through all your programmed tones, mashing on all the footswitches swiftly, just like a true pedal board. Read in some forums that there is a delay switching between presets, folks have even recorded this delay, and it comes out to only MILLISECONDS! Will the audience really notice that??? Heck, my mesa MKV has more of a delay switching between channels compared to the IPB-10. Would've given it max ratings in all aspects except for the crashes, and....no TAP TEMPO...yet! Although rumor has it that Digitech is "working" on an update to the application.
          Great user interface on this unit, drag and drop, sort out order of effects including where the effects sit in the amp loop, plus an additional stomp pedal. As for gigs, i used a mxr dyna comp for boost on solos with levels adjusted to taste, and sensitivity on low (zero), stompbox placed all the way to the end of the entire effects chain. By doing this, the expression pedal is now available for any parameters you assign, i use it mostly on wah's and whammy set for dive bomb, i can actually use my hardtails now for the cover (rendition) songs that my band plays. Gave the rating an 8, will point out why so on the overall comments.
          Build quality is fantastic. We all need to take care of our gear as musicians, nothing is indesctructible. Considering the purpose of this unit, very good construction, good positive tactile feel on the footswitches, good sweep on the expression pedal, although the switch on the expression pedal to activate the wah might be a little too sensitive for me.
          Value would be very subjective upon the buyer, if you already own an iPad2, it's a great addition to your gear. If you don't own iPad2, well, it will get very expensive!!

          Comment on this review

          (0 of 1 customers found this review helpful)

           
          4.0

          pretty cool but it's on the floor

          By Scott McCullor

          from Undisclosed

          Comments about DigiTech iPB-10 Programmable Guitar Multi Effects Pedalboard with iPad Integration:

          Sure, the interface is as cool as it looks. The selection of amps, cabs and effects are above average and their sounds are great. The tweakability factor is high and the visual feedback during edits makes it easy to remember which device you wanted to srlect. But who operates a computer on the floor? I'm not that talented with my toes. I had hoped an extension cord would let me remove he iPad and mount it on a stand but that doesn't work. So I edit it from a stand I built but the wah just ain't the same when operated by hand. If Digitech came out with a functional 30 pin extension and made the tuner accessible via footswitch, then they'd have it.

          Comment on this review

          Displaying reviews 1-10

          Back to top

          Previous | Next »

          You are changing the Ship-To country.

          Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.