- 273008 000000000 273008000000000
Audio-Technica AT4041SP Studio Microphone Pack
- Write a Review
The Audio-Technica AT4041SP Studio Pack offers you a pair of AT4041 studio condenser microphones. Engineered to meet the most critical acoustic requi...Read More
Two small-diaphragm condensers for drum overheads, cymbals, and acoustic guitar recording.
The Audio-Technica AT4041SP Studio Pack offers you a pair of AT4041 studio condenser microphones. Engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound, the AT4041 mic features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability - making them a great choice for drum overheads and cymbals.
The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm breakup distortion. This Audio-Technica pack also includes 2 stand clamps, 2 windscreens, and a protective vinyl storage case.
Requires phantom power.
- AT4041SP Studio Pack includes:
- Two AT4041 cardioid condenser microphones
- Two AT8405a stand clamps
- Two AT8159 windscreens
- Protective vinyl storage case
- About the AT4041 cardioid condenser microphone:
- Smooth, extended frequency response with a slight rise occurring in the high-frequency region
- Ideal for drum overheads, acoustic guitar, piano, horns and under snare
- Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State of the art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
AT4041SP Studio Microphone Pack
- AT4041 Cardioid Condenser Mic:
Element: fixed-charge back plate, permanently polarized condenser
Polar pattern: cardioid
Frequency response: 20-20,000Hz
Low frequency roll-off: 80Hz, 12dB/octave
Open circuit sensitivity: -36dB (15.8 mV), re 1V at 1 Pa
Maximum input sound level: 145dB SPL, 1kHz at 1% T.H.D.
Dynamic range (typical): 121dB, 1kHz at Max SPL
Signal-to-noise ratio: 70 DB, 1kHz at 1 Pa
Phantom Power requirements: 48V DC, 3.2 mA typical
Switch: flat, roll-off
Weight: 4.2oz. (120g)
Dimensions: 6.28" (159.5mm) long,
0.83" (21.0mm) body diameter
Output connector: integral 3-pin XLRM-type
Accessories furnished: AT8405A stand clamp for 5/8"-27 threaded stands; at8159 Windscreen; protective carrying case
Audio-technica case style: S1