- Product H80694
Schecter Guitar Research ZV Custom Reissue Left-Handed Electric Guitar
- Write a Review
The Schecter ZV Custom Reissue Left-Handed Electric Guitar is a sleek double cutaway with a set neck. The smooth rosewood fingerboard is fully-bound ...Read More
We're sorry-this item is unavailable.
We're sorry—this item is unavailable.
A double-cutaway with Grover tuners and coil-splittable Seymour Duncan pickups.
The Schecter ZV Custom Reissue Left-Handed Electric Guitar is a sleek double cutaway with a set neck. The smooth rosewood fingerboard is fully-bound and has mother-of-pearl inlays with '6661' inlayed at the 12th fret in respect to Zacky. Seymour Duncan SH-4 (JB) Pickups are controlled via dual volume knobs, a master tone with tap, and a 3-way switch to offer a variety of humbucker and single-coil type tones. Grover tuners and a TonePros System bridge guarantee intonation and precise tuning during your performance.
The original Rotomatic® with an improved higher ratio gearing. The 18:1 ratio provides for finer tuning and greater stability. The finer gears provide smoother tuning and a higher degree of backlash elimination
Rosewood Finger Board
The most common fretboard, rosewood is naturally oily, and works well for any surface that sees frequent human contact. The sound is richer in fundamental than maple because the stray overtones are absorbed into the oily pores.
Seymour Duncan SH-4 (JB) Pickups
The archetype hot-rodded humbucker for over 30 years. Great for everything from heavy blues to heavy metal. The JB provides slammin' output while retaining singing highs, aggressive harmonics, and just the right blend of sustain and distortion. Goes from sweet warm tones to raw rock 'n' roll.
3-pc Mahogany Neck
Made with 3 pieces of mahogany for extra stability. 3 piece necks can withstand the test of time. Where standard necks may show aging defects from temperature and moisture changes throughout the years, the 3 piece neck will stay nice and straight for a lifetime of playability.
- Left-Handed model
- Set Neck Construction
- Mahogany Body
- 3-pc Mahogany Neck
- Rosewood Fingerboard
- 22X Jumbo Frets
- MOP & Abalone “Crown” w/”6661” at 12th fret Inlay
- Crème Binding
- Grover Tuners
- Seymour Duncan SH-4 (JB) Pickups
- Vol/Vol/Tone (tap)/3-way switch Electronics
- TonePros System Bridge
- 24.75" Scale
Put your resume of licks and runs on this ZV. Order today.