• Gift Certificate
  • Track Order
  • Help
  • Feedback [+]
  • Ship To: US Flag
  • Shop All Categories
  • Hot Deals

MF MD HG Labor Day Inclusion 8-22-14 EXT

Audio-Technica ATW-1822 1800 Series Dual Channel UHF Wireless System  

  • Write a Review
Product #275100

We're sorry—this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Similar Items:
  • See All Audio-Technica Handheld Microphone Wireless Systems

    Two completely independent receiver channels in a single unit.

    The Audio Technica ATW-1822 camera mount wireless microphone system provides an extremely flexible, professional, and easy-to-use portable wireless solution. It includes the ATW-R1820 dual-channel receiver and two ATW-T1802 plug-on transmitters. The ATW-1822 wireless system offers UHF reception of 996 user-selectable frequencies in 25 kHz steps. It also features automatic frequency scanning, Tone Lock squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control, and durable metal construction.

    ATW-R1820 single-channel receiver

    The ATW-R1820 dual receiver has two completely independent receiver channels in a single unit. Dual balanced outputs enable signals to be mixed, or independently assigned to each output. Independent audio level controls provide flexible audio mixing and monitoring possibilities.

    ATW-T1802 plug-on transmitter

    The ATW-T1802 plug-on transmitter features a locking XLR connector for adapting dynamic and condenser microphones and selectable high and low transmission modes to conserve battery life/maximize power. The ATW-T1802 Plug-on Transmitter also provides power to condenser microphones rated to operate on 12V phantom power or less.

    • Two completely independent receiver channels in a single unit, for simultaneous operation of two microphones
    • Compact dual receiver is easy to mount on a camera
    • True Diversity operation for resistance to multi-path interference and dropouts
    • UHF reception with 996 frequencies selectable in 25 kHz steps
    • Automatic frequency scanning for easy selection of open channels
    • Tone Lock squelch system eliminates interference when transmitter is off
    • Two independent balanced outputs
    • Headphone monitor output with independent level control
    • Battery fuel-level indicators on transmitters and receiver
    • Soft-touch controls for easy frequency selection
    • LCD frequency and battery status display with backlight
    • Antenna and AF Peak LED indicators
    • Dual-channel receiver can operate in single-receiver mode to extend battery life when only one audio channel is in use
    • Transmitters operate in low or high transmission modes to conserve battery life/maximize power
    • Easy, user-friendly operation
    • Clear, natural sound quality
    • Powered by AA batteries or by external 12V DC power (not included)
    • System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably

    Order today with the protection of our 45-day lowest price and total satisfaction guarantees!


    ATW-1822 1800 Series Dual Channel UHF Wireless System Specifications:

    • ATW-R1820 Dual-channel receiver
    • Receiving System: Dual independent RF sections, automatic-switching diversity
    • Image Rejection: >50 dB typical
    • Signal-to-Noise Ratio: 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz
    • Total Harmonic Distortion: <1% (±10 kHz deviation at 1 kHz)
    • Sensitivity: 25 dBuV, (S/N 60 dB at 5 kHz deviation, A-weighted)
    • Audio Output (balanced): 27 mV (at 1 kHz, ±5 kHz deviation)
    • Output Connector: 3-pin mini XLR (TA3M-type)
    • Monitor Headphone Output (typical): 35 mW max., 32 ohm load
    • Monitor Headphone Jack: 3.5 mm TRS, signals on both Tip and Ring
    • External Power Requirements: 12V DC nominal, 500 mA
    • Batteries (not included): six 1.5V AA alkaline (not included)
    • Current Consumption (battery): 600 mA typical
    • Battery Life: 6 hours typical, depending on battery type and use pattern
    • Dimensions: 3.35" (85.0 mm) W x 5.24" (133.0 mm) H x 1.42 (36.0 mm") D
    • Net Weight: (without batteries) 15.0 oz. (425 grams)
    • Accessories Included: Two flexible UHF antennas; two 18" TA3F to XLRM
    • output cables; belt pouch
    • ATW-T1802 plug-on transmitter
    • RF Power Output: High: 30 mW; Low: 10 mW, nominal
    • Spurious Emissions: Under federal regulations
    • Input connector: 3-pin locking XLRF-type
    • Batteries (not included): Two 1.5V AA alkaline
    • Current Consumption: High: 180 mA; Low: 160 mA, typical
    • Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
    • Dimensions (W x H x D): 1.57" x 4.37" x 1.57", 40.0 x 110.0 x 40.0 mm
    • Net Weight (without batteries): 7.0 oz (199 grams)
    Customer Reviews
    You are changing the Ship-To country.

    Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.