- H68487 000000000 H68487000000000
Shure PGXD24/PG58 Digital Wireless System with PG58 Mic
- Write a Review
This PGXD24/PG58 Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wi...Read More
24-bit digital wireless receiver and top-notch dynamic mic/transmitter deliver strong, clean RF performance.
This PGXD24/PG58 Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the legendary PG58, a professional quality microphone ideal for lead and backup vocal performance applications.
Engineered to be easy to operate, the Shure PG58 lets you capture the imagination of your audience so you can get your message across. Just as artists, visionaries and social leaders across generations and around the world have done with Shure products for more than 75 years.
The Shure PG58 has a tailored frequency response that is smooth, extended and is tuned specifically for vocal applications The cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides and is less susceptible to feedback. The dynamic cartridge has a simple, rugged coil and handles extreme volume levels without distortion.
Besides the PG58 microphone, you also get a PGXD4 wireless receiver, PGXD2 handheld transmitter, padded case, and a microphone clip.
The PGXD2 transmitter features automatic setup, a multi-function LED Indicator (power, lockout, mute, low battery), and provides you with 8 hours of continuous use on 2 AA batteries. It gives you and your microphone a generous 200' (60m) operating range without losing audio quality.
The PGXD4 receiver offers 24-bit/48kHz accurate sound, offers technology for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- PGXD4 Wireless Receiver
- 24-bit / 48kHz digital technology for incredibly accurate sound
- Automatic frequency selection locates a clear channel instantly
- One-touch sync automatically syncs the transmitter and receiver
- True digital diversity delivers rock-solid wireless signal reliability
- Up to 5 systems can be used at once
- 1„4" and XLR audio outputs
- Included padded carrying case for portability and protection
- PGXD2 Handheld Transmitter Power, mute, and battery status LED
- Up to 9 hours of continuous use from 2 AA batteries
- 200" (60m) operating range
- 10dB of adjustable gain
- Lockable interface prevents accidental setting changes
Get pure digital sound without being bogged down by wires. Order this wireless system today!
PGXD24/PG58 Digital Wireless System with PG58 Mic
- PGXD4 receiver
Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")
Weight: 289g (10.2oz.)
Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Î load): -2.5dBV 1/4" connector (into 10000Î load): +10 dBV
Sensitivity: -102 dBm @ 10-5 BER
Image rejection: > 70dB, typical
Impedance balanced Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Red: 2dB below clip
Amber: 12dB below clip
Green: 50dB below clip
Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground
PGX2 Handheld Transmitter
Audio Input Level:
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range: 10dB
RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
Dimensions including SM58 cartridge: 254mm x 51mm dia. (10" x 2")
Weight: 290g (10.2oz.) without batteries
Housing: Molded PC/ABS handle and battery cup
Power Requirements: 2 AA size alkaline or rechargeable batteries
Battery Life: > 8 hours (alkaline)
Microphone Type: Dynamic (moving coil)
Polar Pattern: Cardioid (unidirectional)
Frequency response: 60 to 15,000Hz
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
Output Impedance (at 1000Hz): 300Î
Sensitivity (at 1000Hz): -53dBV/Pa, (2.2 mV), 1 Pascal=94dB SPL
Electromagnetic Hum Sensitivity: 26dB equivalent SPL in a 1 millioersted field (60Hz)
Switch: Built-in On/Off switch
Connector: Three pin professional audio connector (male XLR type)
Case: Die cast metal handle, black matte finish; hardened silver colored, spherical steel mesh grille
Environmental Conditions: This microphone operates over a temperature range of -29 to 57 Celsius (-20 to 135 Fahrenheit), and at a relative humidity of 0 to 95%.
Weight: Net: 321g (11.3 oz) Packaged: 908g (2lb.)