Backstage Pass: Earn 8% Back in RewardsLearn More
  • Shop by Category
  • Hot Deals
  • Looking for Coupons? Call us

MF MD HG Live Sound monthown the stage 04-27-16
Audio-Technica Logo
Product 275094

Audio-Technica ATW-1813 1800 Series Camera Mount UHF Wireless System   

  • Write a Review

The Audio Technica ATW-1813 1800 Series Camera Mount UHF Wireless System includes ATW-R1810 single-channel receiver, ATW-T1801 UniPak body-pack trans...Read More

We're sorry—this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Similar Items:
OVERVIEW

The Audio Technica ATW-1813 1800 Series Camera Mount UHF Wireless System includes ATW-R1810 single-channel receiver, ATW-T1801 UniPak body-pack transmitter, ATW-T1802 plug-on transmitter, and a Lavalier microphone. The ATW-1813 wireless mic system offers UHF reception of 996 user-selectable frequencies in 25 kHz steps. It also features automatic frequency scanning, Tone Lock squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control, and durable metal construction. It is a camera-mount wireless microphone system that is extremely flexible, professional, and easy-to-use.

ATW-R1810 single-channel receiver

The Audio Technica ATW-R1810 single-channel receiver has true diversity operation: two antennas feed 2 completely independent RF sections on the same frequency; automatic logic circuitry selects the superior signal. The ATW-R1810 features BNC-type antennae connectors, output and monitor levels, a balanced XLR output and a LCD (Liquid Crystal Display) that shows battery status and frequency settings.

ATW-T1801 UniPak body-pack transmitter

The ATW-T1801 UniPak body-pack transmitter features a professional locking 4-pin connector compatible with all Audio-Technica Wireless Essentials microphones. The ATW-T1801 transmitter offers selectable high and low transmission modes to conserve battery life/maximize power.

ATW-T1802 plug-on transmitter

The ATW-T1802 plug-on transmitter features a locking XLR connector for adapting dynamic and condenser microphones and selectable high and low transmission modes to conserve battery life/maximize power. It also provides power to condenser microphones rated to operate on 12V phantom power or less.

Professional camera-mount wireless that's easy, flexible, and reliable.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

FEATURES
  • Compact receiver is easy to mount on a camera
  • UHF reception with 996 frequencies selectable in 25 kHz steps
  • Automatic frequency scanning for easy selection of open channels
  • Tone Lock squelch system eliminates interference when transmitter is off
  • Headphone monitor output with independent level control
  • Battery fuel-level indicators on transmitters and receiver
  • Soft-touch controls for easy frequency selection
  • True Diversity operation for resistance to multi-path interference and dropouts
  • LCD frequency and battery status display with backlight
  • Antenna and AF Peak LED indicators
  • Transmitters operate in low or high transmission modes to conserve battery life/maximize power
  • Easy, user-friendly operation
  • Clear, natural sound quality
  • Powered by AA batteries
  • System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably

A portable wireless solution for video of live performances.

SPECIFICATIONS

ATW-1813 1800 Series Camera Mount UHF Wireless System

  • Overall System
  • UHF Operating Frequencies: Band C: 541.500 to 566.375 Mhz; Band D: 655.500 to 680.375 MHz
  • Number of Operating Frequencies: 996 total per band (25 kHz increments)
  • Frequency Stability: ±0.005%, Phase Lock Loop frequency control
  • Modulation Mode: FM
  • Normal Deviation: ±10 kHz
  • Operating Range: 300' (100 m) typical
  • Operating Temperature Range: 23° F (- 5° C) to 113° F (45 ° C)
  • Frequency Response: 70 Hz to 15 kHz
  • ATW-R1810 single-channel receiver
  • Receiving System: Dual independent RF sections, automatic-switching diversity
  • Image Rejection: >50 dB typical
  • Signal-to-Noise Ratio: 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz
  • Total Harmonic Distortion: <1% (±10 kHz deviation at 1 kHz)
  • Sensitivity: 25 dBuV, (S/N 60 dB at 5 kHz deviation, A-weighted)
  • Audio Output (balanced): 27 mV (at 1 kHz, ±5 kHz deviation)
  • Output Connector: 3-pin mini XLR (TA3M-type)
  • Monitor Headphone Output (typical): 35 mW max., 32 ohm load
  • Monitor Headphone Jack: 3.5 mm TRS, signals on both Tip and Ring
  • External Power Requirements: 12V DC nominal, 500 mA
  • Batteries (not included): Four 1.5V AA alkaline
  • Current Consumption (battery): 315 mA typical
  • Battery Life: 10 hours typical, depending on battery type and use pattern
  • Dimensions: 2.95" (75.0 mm) W x 4.92" (125.0 mm) H x 1.25 (32.0 mm") D
  • Net Weight: (without batteries) 10.5 oz. (300 grams)
  • Accessories Included: Two flexible UHF antennas; one 18" TA3F to XLRM
  • output cable; belt pouch
  • ATW-T1801 UniPak body-pack transmitter
  • RF Power Output: High: 30 mW; Low: 10 mW, nominal
  • Spurious Emissions: Under federal regulations
  • Dynamic Range: >105 dB, A-weighted
  • Input Connections: High impedance, low impedance, bias
  • Batteries (not included): Two 1.5V AA alkaline
  • Current Consumption: High: 180 mA; Low: 160 mA, typical
  • Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
  • Dimensions: 66.0 mm (2.60") W x 87.0 mm (3.43") H x 24.0 mm (0.94") D
  • Net Weight (without batteries): 2.8 oz (80 grams)
  • Accessories Included: one omnidirectional lavalier microphone
  • ATW-T1802 plug-on transmitter
  • RF Power Output: High: 30 mW; Low: 10 mW, nominal
  • Spurious Emissions: Under federal regulations
  • Input connector: 3-pin locking XLRF-type
  • Batteries (not included): Two 1.5V AA alkaline
  • Current Consumption: High: 180 mA; Low: 160 mA, typical
  • Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
  • Dimensions: 1.57" (40.0 mm) W x 4.37" (11.1.0 mm) H x 1.57" (40.0 mm) D
  • Net Weight (without batteries): 7.0 oz (199 grams)
Reviews
Loading....
See All Audio-Technica Lavalier Microphone Wireless Systems
Ship To: US Flag
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.