503HR 500-Series 3-Slot Rack

A Designs Audio introduces the 503HR horizontal, 3-space, 1RU rack for 500 Series modules.The 503HR is replacing the A-Designs 500HR 2-slot, horizontal rack to accommodate the increasing need for Channel Strips in both recording and live application fields. With the 503HR you can create your own customized channel strip perfect for pro audio recording and live applications.

The 503HR has a robust external power supply with an LED display. This displays the amount of power being consumed or if the units in the 503HR are drawing too much power. But, the robust power supply can handle the demand. There is a 3-LED array on the face plate which displays the +16V, -16V and +48V. Some 503HR features include: All metal construction, XLR in and out, as well as a “FEED” switch on the front. This allows you to come into slot 1 and out slot 3. It also allows you to just feed 1 and 2 or none.

The “Feed” switch is a 3-position switch used for: Slots 1 and 2 or “Off” or “All”. This reduces the need to use six (6) XLR cables for a channel strip. But, if you are inclined to do so, you still have that option. When using the 503 with the “Feed” switch, all that is needed are two (2) XLR cables - Male and Female. The input, as an example, would go to Slot 1 and the output to Slot 3, when the “Feed” switch is in the “ALL” position. This is very useful for live applications. For example, you may only require the 503HR (with a 500 series Pre, Compressor, EQ), a power amp and a cabinet. Place the “Feed” switch to position “All.” The connections would be as follows: Assign the output of Slot 2 for FOH (Front of House) and the output of Slot 3 for your amp. Used as a Channel Strip for Bass or Guitar [Preamp, Compressor and EQ], your 500 series Pre-amp would go into the 500 series Compressor, Compressor out to the FOH and your 500 series EQ to your power amp then to your cabinet.