- Product 270976
Applied Microphone Technology AMT ACC3 Stereo Accordion Microphone System
- Write a Review
The AMT ACC3 is a multi condenser 3 microphone system for accordion. The system contains the latest components in micro electronics. The ultra low ma...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
A system for complete accordion miking.
The AMT ACC3 is a multi condenser 3 microphone system for accordion. The system contains the latest components in micro electronics. The ultra low mass makes placement easier than other systems on the market today. The system comes with the "Nano Blend" belt pack *Stereo Version. The stereo version is slightly different than the standard mono belt pack. The stereo version requires the player to use a Y cable. (1/4 in. stereo â Two 1/4 in. mono ends) The master volume control on the mono version is replaced with an on/off switch, and the GAIN controls on the mono version are replaced with volume controls.
Housing most of the electronics outside of the accordion makes installation less complicated. With fewer holes to drill, it is easier and more dependable over many years of use. The battery is changeable outside of the accordion because it is located in the belt pack. It's small size and low mass gives the end user the ability to permanently or temporarily mount the microphone without major modifications to the accordion.
The ACC3 accordion microphone comes with a wiring harness allowing installation of the bass mic through the bellows and mounted close to the bass machine. Some modification may be necessary to accommodate the third microphone.
The microphone system is best suited for mic level inputs (PA systems) but also works with line level amps. The ACC3 will be wireless capable, able to be interfaced with major brand wireless products. The 9 volt battery life for operation is between 80-120 hours of intermittent use before replacement. The output of this system is activated by the quarter inch jack output when plugged in.
The AMT ACC3 Stereo version has mixing capabilities right on the belt pack. The belt pack has two Volume controls to adjust the volume of the right hand microphones in relation to the left hand microphones. The belt pack also has trim filters. The trim filters only cut the highs / and or lows for both the right and left hand independently. You cannot boost highs or lows, this feature is designed to help the players with feedback.
Requires phantom power.
- Element: Condenser
- Polar Pattern: Omni
- Frequency: 20Hz - 20kHz
- Sensitivity: 64dB+ 3dB
- Impedance: 600 Ohms*
- Power: 9 volt battery
- Max input SPL: 132 dB
- Mic Dimension: 375 X .50 mm
- Cable: 6'
- Weight: Mic only: 11 grams Per mic