- Product 270992
Applied Microphone Technology AMT S15G Acoustic Guitar Microphone with BP45 Preamp and Side Mounting
- Write a Review
The S15G is a low-profile condenser microphone that has a cardioid pattern which gives it better gain before feedback than most guitar microphones on...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
Safely clamps to your guitar for optimal mic placement.
The S15G is a low-profile condenser microphone that has a cardioid pattern which gives it better gain before feedback than most guitar microphones on the market. The element as well as the mounting clamp is designed for the instrument. AMT designs microphones for each instrument and does NOT adapt elements or mounting gear to fit instruments. The S15G system clamps to the outside of the guitar. It is adjustable from a minimum of 3" to a maximum of 5-7/8". The AMT S15G features a flexible 6" gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.
The microphone attaches to the side of the guitar or other musical instrument, and is suspended in a 4 point isolation ring reducing handling noise. The S15G terminates to the BP42 belt pack. It operates on either 9 volt battery or Phantom power to 48 volts DC. It incorporates an LED to indicate the status of the voltage.
The S15G is terminated by a 3.5mm plug which connects to a belt pack preamp. The included belt pack houses a volume control, contours the setup for the intended instrument, and powers the microphone system appropriately. A low Z cable and case is included.
The S15G instrument mic also comes with a cable that disconnects. This cable will allow the player to switch back and forth between the different AMT Preamps as well as convert it to the wireless setup. (Different cables and preamps sold separately)
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- Flexible 6" Gooseneck
- Bp42 Belt Pack Preamp
- 1/4 - Xlr Cable
- Hard Shell Blo-Mold Protective Case
- Operates On Either 9 Volt Battery Or Phantom Power
- Wireless Ability
- Rugged Construction Of Anodized Aviation Aluminum
AMT S15G Acoustic Guitar Microphone with BP45 Preamp and Side Mounting
- Element: Condenser
Polar Pattern: Cardioid
Frequency: 50Hz - 18kHz
Sensitivity: -65dB+ 4dB
Impedance: 150 Ohms
Phantom Power: 12 to 52 vDC or 9 Volt battery
Max input SPL: 140 dB
Dimension: 6" Flex Arm
Weight Mic only: 49 grams