- Write a Review
A clip-on mic for violin, viola, or mandolin.
The AMT VSW - Shure Clip-On Condenser Microphone System was designed to operate with Shure wireless systems. The VS is an ultra miniature, feather-weight, low-profile condenser microphone specially designed for the violin, viola, and mandolin. The AMT mic attaches firmly to instrument with a clamp designed to not harm it or dampen its natural sound or vibrations. The clip on microphone provides pure tonal reproduction without being obtrusive. With the included AMT Interface, the microphone can plug directly into the interface which then plugs directly into Shure wireless transmitter.
Requires phantom power.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
Order today and play electrified,
AMT VSW - Violin Microphone with Cable for AMT, Shure, Sabine, & Line 6 Wireless Systems
- Element: Condenser
Polar Pattern: Cardioid
Frequency: 25Hz - 20kHz
Sensitivity: 68dB + 4dB
Impedance: 150 Ohms
Phantom Power: 12 - 52 vDC or 9 Volt Battery
Max input SPL: 140 dB
Dimension: 3" Flex Arm
Weight (Mic only): 20 grams