- Write a Review
Condenser mic with 2 cardioid elements that mounts to clarinet, alto and bass flute, and oboe.
The AMT WS Clip-On Double Microphone System includes the WS Double condenser microphone and the BP45 beltpack preamp. The WS is a low-profile double condenser microphone that attaches to the clarinet, alto and bass flute, or oboe with a Ultra- miniature low mass clamp. It is specifically designed for the timbre of the clarinet, The instrument microphone provides pure tonal reproduction while being unobtrusive. It has an even reproduction of sound across the entire instrument. The AMT WS features a flexible gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive. The WS features one microphone at the bell and second positioned over the keys to provide a truer reproduction for the musical instrument's tone quality.
The WS mic is terminated by a 3.5mm plug which connects to a belt pack preamp. The output is a predetermined mix balanced by the nature of the instrument. The included belt pack houses a volume control, contours the setup for the intended instrument, and powers the microphone system appropriately. A low Z cable and case is included.
The AMT WS models including WSW, WS Studio, and the WS all come with TWO isolation rings now. Both microphones are suspended in AMT's iso-ring technology which allows more gain before feedback and less handling noise.
AMT BP45 Beltpack Preamp
The WS setup Comes with BP45 beltpack style preamp, case, and AMT disconnecting cable technology which allows the microphone to be used as "Wireless, with beltpack, or Studio" models if needed. Phantom power OR 1 AA battery required. Includes 4 Pin Locking connector, XLR output, and low trim filter. Works with all AMT microphones that include D.C.T. (Disconnecting Cable)
Requires phantom power.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- AMT WS Microphone
- BP45 Belt pack Preamp
- 1/4" to XLR Cable
- Hardshell Blo-mold protective case
Fr the player that needs control of there volume in a beltpack-style setup. Order today!
- Element: Condenser
- Polar Pattern: Figure 8
- Frequency: 30Hz - 20kHz
- Sensitivity: -68dB+ 4dB
- Impedance: 150 Ohms
- Phantom Power:12 to 52 vDC or Self-powered battery
- Max input SPL: 140 dB
- Dimension:13" Flex Arm
- Weight (mic only): 31 grams
Musician's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
- Unexpected and unintentional spills, drops and cracks
- Normal wear and tear
- Power surges
- Dust, internal heat and humidity
Other plan features include:
- For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
- For products under $200 experiencing the above failures, a Musician's Friend gift card will be issued for the full price of the product + tax.
- Shipping fees covered if required for repair or replacement
- Plans are transferable in the event merchandise is sold
- Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.