Limited time offer: Save up to 15% off with code: "MEMORIAL" Shop Now >>
Looking for Coupons?Call us 800-449-9128 Hablamos Español
MF MD HG01 Memorial Day Call & Save 05-22-17
Astatic by CAD Logo
Product 271278

Astatic by CAD 202R Mini Omni Installation Boundary Microphone   

  • Write a Review

The Astatic 202R microphones are miniature, high performance electret condenser microphones designed for low-profile mounting in panels, tables, or c...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
OVERVIEW

Mounts in a 13/16" opening!

The Astatic 202R microphones are miniature, high performance electret condenser microphones designed for low-profile mounting in panels, tables, or ceilings. They have been redesigned with improved RF immunity to greatly reduce susceptibility to radio interference from GSM based cell phones, PDA/cell phones, cell phones with walkie-talkie capability and other similar devices. They are excellent choices for teleconferencing, voice-lift, professional recording, courtrooms, surveillance and many other critical applications. The microphone is 1.1" in diameter at the largest point and mounts in a 13/16" opening in panels up to 2" thick. The 202Rs mics are extremely rugged and feature a solid machined brass body and Astatic Flex-FormTM hardened grille screens. It also has a built-in 80Hz, 12dB/octave high pass filter and are terminated with standard male 3-pin XLR connectors. Color-matched shockmount isolators are also included with each microphone. (15/16" mounting hole required when using shock isolators). It features self-contained low noise electronics and operate from standard P12, P24 and P48 phantom power. The front of the boundary microphone is located by the Astatic logo in the cut out section of the microphone bezel. The mic features an omnidirectional (half hemisphere above mounting surface) pickup which is useful when a directional pattern is not desired. No special orientation is required when mounting the 202R.

FEATURES
  • For teleconferencing or voice-lift sound reinforcement in meeting spaces, surveillance and ambient recording or audio observation
  • RF resistant design
  • Low-profile mounting in panels, table tops, walls or ceilings
  • 12dB/octave bass roll-off @ 100Hz for elimination of unwanted thumping or rumbling low frequencies
  • Hemi omni pick-up pattern
  • Dual-surface and bottom shock isolation bushings
  • Low noise transformerless electronics design

Small and unobtrusive by a giant in sound reproduction. Order today.

SPECIFICATIONS

202R Mini Omni Installation Boundary Microphone

  • Operating Principle: Electret Condenser
    Polar Pattern: Omnidirectional
    Frequency Response: 80Hz - 10kHz
    Sensitivity: -30dBV (32mV) @ 1Pa
    Impedance: 150ohms
    Self Noise: 26dBA
    Max SPL: 125dB, 1% THD
    Connector: 3 pin male XLR type
    Phasing: Positive pressure on diaphragm generates a positive voltage on pin 2 relative to pin 3
    Finish: Durable urethane
    Net Weight: 2.3 oz. (65 grams)
    RF Immunity: Exceeds ENT55103-2, E1, E2, E3 and E4
    Power Requirements: P12, P24, P48, 2.4 mA
    RoHS Compliant
Reviews
Loading....
See All Astatic by CAD Condenser Microphones
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.