- Product 275019
Audio-Technica AEW-5111 Artist Elite Dual Receiver UniPak Wireless System
- Write a Review
The Audio-Technica AEW-5111 Artist Elite Wireless System includes the AEW-R5200 dual receiver and two AEW-T1000 UniPak transmitters. Designed for l...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
The Audio-Technica AEW-5111 Artist Elite Wireless System includes the AEW-R5200 dual receiver and two AEW-T1000 UniPak transmitters.
Designed for live audio use on professional tours, in stadiums, concert halls, houses of worship and other demanding sound environments, Audio-Technica's dual-receiver Artist Elite 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide.
With two independent True Diversity receivers in a single full-rack housing, the AEW-5111 from the 5000 Series conserves rack space while providing outstandingly reliable and flexible performance. Two hundred selectable channels are offered in each of two available UHF bands. Receivers may be linked to form a complete system in which the built-in IntelliScan capability automatically determines and sets the best available frequencies on all linked receivers. Equipped with Ethernet ports, the 5000 Series receiver allows computer management and control (software included).
Two independent synthesized UHF receiver channels in a full-rack 1U case. Its common power supply operates on 100”240V 50/60 Hz AC power worldwide with the appropriate IEC-type power input cordset. In addition, a pass-through AC outlet on each receiver with included AC jumper cable permits daisy-chaining of an entire AEW-R5200 receiver stack, freeing AC outlets for other equipment.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
Two independent receiver channels in a single housing
200 selectable UHF channels per band and True Diversity reception for interference-resistant operation
Dual Compander circuitry processes high and low frequencies separately for unmatched audio quality
Advanced digital Tone Lock squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display
Link and coordinate multiple AEW receivers via included data cable and/or built-in Ethernet computer interface
IntelliScan feature automatically finds and sets best available frequencies on all linked receivers
On-board Ethernet interface for monitoring and controlling system parameters with included software
All transmitters offer rugged, ergonomic metal bodies, programmable features, soft-touch controls and 10 mW/35 mW switchable RF power
Order the ultimate in wireless performance with the protection of our 45-day lowest price and total satisfaction guarantees!
Receiving System: Dual independent RF sections, automatic-switching diversity
Image Rejection: 60 dB typical
Signal-to-noise Ratio: 115 dB at 40 kHz deviation (IEC-weighted, 75 kHz maximum modulation)
Total Harmonic Distortion: ‰¤1% (10 kHz deviation at 1 kHz)
Sensitivity: 20 dBuV (S/N 70 dB at 5 kHz deviation, IEC-weighted)
Intermediate Frequency: 65.75 MHz, 10.7 MHz
Audio Output (ATTN switch at "0"): Microphone 25 mV (at 1 kHz, ±5 kHz deviation, 10k ohm load); Instrument 50 mV (at 1 kHz, ±5 kHz deviation,
10k ohm load)
Both outputs are transformer isolated and balanced
Audio Output Attenuator (ATTN) Three-position switch: 0/-6/-12 dB
Output Connectors: Microphone XLRM-type; Instrument 1/4" (6.3 mm) TRS balanced phone jack
Headphone Output: Connector 1/4" (6.3 mm) TRS ("stereo") phone jack
Power Output: 10 mW + 10 mW at 1 kHz, ±5 kHz deviation into 32 ohms; maximum output, 220 mW + 220 mW into 32 ohms.
Headphones switchable between Channel 1 and Channel 2
External Mute: 1/4" (6.3 mm) TS unbalanced phone jack, each channel
Antenna Terminal Voltage: DC 10V-12V, 20 mA (BNC-type jack)
Computer Interface: Type Ethernet, 10 BaseT mode; Connector RJ-45; Proprietary Software Supplied on CD-ROM
Power Supply: 100”240V AC 50/60 Hz, 15W
Pass-through AC Power Outlet: 100”240V AC 50/60 Hz, 5A maximum
Dimensions: 18.98" (482.0 mm) W x 1.74" (44.0 mm) H x 10.85" (275.5 mm) D
Net Weight (without accessories): 8.8 lbs. (4.0 kg)
Accessories Included: Detachable IEC-type AC power cable; two flexible UHF half-wave antennas; link cable, IEC-type AC pass-through cable;
front-mount antenna cables and connectors; CD-ROM with computer
control interface software; AEW-TB44 transmitter bag
AEW-T1000 Unipak Transmitter
RF Power Output: High 35 mW; Low 10 mW, nominal
Spurious Emissions: Under federal regulations
Dynamic Range: Microphone ‰110 dB, A-weighted; Instrument ‰100 dB, A-weighted
Input Connections: High impedance, low impedance, bias
Batteries (not included): Two 1.5V AA alkaline
Current Consumption High: 185 mA; Low: 165 mA, typical
Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
Dimensions: 2.60" (66.0 mm) W x 3.43" (87.0 mm) H x 0.94" (24.0 mm) D; not including antenna
Net Weight (without batteries): 4.4 oz (125 g)