- Product 275063
Audio-Technica AT813a Handheld Cardioid Condenser Microphone
- Write a Review
The AT813a is ideal for close-up interviews, vocals, overheads, piano, and strings. Its cardioid polar pattern reduces pickup of sounds from the side...Read More
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
A very versatile multi-application condenser.
The AT813a is ideal for close-up interviews, vocals, overheads, piano, and strings. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic's proximity effect provides added warmth when used close up. Features include a large protective screen that reduces "popping" and sibilant distortion. It operates on battery or phantom power.
- Ideal for close-up vocals, overheads, piano and strings
- Sound is similar to far more expensive studio microphones
- Low-mass diaphragm ensures minimum distortion
- Cardioid pattern provides added warmth when used close up
- Operates on battery or phantom power
Perfect for home recording, podcasts, and presenters looking for a warmer vocal sound Order today.
AT813a Handheld Cardioid Condenser Microphone
- Element: Fixed-charge back plate, permanently polarized condenser
Polar pattern: Cardioid
Frequency response: 30-20,000 Hz
Low Frequency roll-off: 80 Hz, 12 dB/octave
Open circuit sensitivity
Phantom: ”44 dB (6.3 mV) re 1V at 1 Pa
Battery: ”45 dB (5.6 mV) re 1V at 1 Pa
Phantom: 200 ohms
Battery: 270 ohms
Maximum input sound level:
Phantom: 137 dB SPL, 1 kHz at 1% T.H.D.
Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic range (typical):
Phantom: 113 dB, 1 kHz at Max SPL
Battery: 99 dB, 1 kHz at Max SPL
Signal-to-noise ratio: 70 dB SPL, 1 kHz at 1 Pa;
Phantom power requirements: 9-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current/Life: 0.4 mA / 1200 hours typical
Weight: 7.1 oz. (200 g)
Dimensions: 7.60" (193 mm) long, 1.98" (50.3 mm) diameter
Output connector: Integral 3-pin XLRM-type
Accessories furnished: AT8405a stand clamp for 5/8"-27 threaded stands; battery; soft protective case
Audio-Technica case style: S7