Skip to main content Skip to footer
Save up to 15% with code: PRESDAY18
Looking for Coupons?Call us (877) 509-9963 Hablamos Español
MF MD HG01 February Clearance 02-03-18

Audio-Technica ATW-2129 Bodypack Wireless System with AT829cW Lavalier Microphone

  • Write a Review
Product 276526
$000
  • Free Shipping With Backstage Pass (48 Contiguous U.S. States)

The Audio-Technica's ATW-R2100 receiver is matched with the ATW-T210 UniPak Microphone System transmitter and AT829cW lavalier microphone for simple-...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
OVERVIEW

Clear sound quality and rock-solid, dependable performance

The Audio-Technica's ATW-R2100 receiver is matched with the ATW-T210 UniPak Microphone System transmitter and AT829cW lavalier microphone for simple-yet-powerful wireless performance. At the touch of a button, the receiver will quickly find an open channel. Interference isn't an issue thanks to the Tone Lock system, and the ground lift switch prevents hum caused by ground loops between the sound system and receiver.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

FEATURES
Automatic frequency scanning finds an open channel at the touch of a button 
All 10 user-switchable channels are compatible”for easy use with multiple systems; no confusing frequency groups
True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
Tone Lock tone squelch system fights interference
Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
Includes rack-mount kit and detachable UHF antennas
system and receiver
SPECIFICATIONS
Operating Frequency: 656.125 to 678.500 MHz 
Number of Channels: 10 total
Frequency Stability: ±0.005%, Phase Lock Loop frequency control
Modulation Mode: FM
Normal Deviation: ±5 kHz
Operating Range: 300' typical
Operating Temperature Range: 41 F (5 C) to 113 F (45 C)
Frequency Response: 100 Hz to 15 kHz

Receiver specifications
Receiving System: Dual independent RF sections, automatic-switching diversity
Image Rejection: 55 dB nominal, 50 dB minimum
Signal-to-noise Ratio: >100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz
Total Harmonic Distortion: <1% (10 kHz deviation at 1 kHz)
Sensitivity: 20 dBV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
Intermediate Frequency: 65.75 MHz, 10.7 MHz
Audio Output: Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Output Connectors: Unbalanced: 1/4" (6.3 mm) phone jack
Balanced: XLRM-type
Power Supply: 120V AC 60 Hz, or 12-18V DC, 350 mA, with external supply
Dimensions: 8.27" (210.0 mm) W x 1.73" (44.0 mm) H
x 6.39" (162.2 mm) D
Weight: 2.2 lbs (1.0 kgs)
Accessories Included: Two flexible UHF antennas, rack-mount adapters, AC adapter

Body-pack transmitter specifications
RF Power Output 12 mW
Spurious Emissions Under federal regulations
Input Connections High impedance, low impedance, bias
Batteries Two 1.5V AA alkaline (not included)
Current Consumption 150 mA typical
Battery Life Approximately 9 hours (depending on battery type and use pattern)
Dimensions 2.60" (66.0 mm) W x 3.63" (92.3 mm) H x 0.89" (22.5 mm) D
Net Weight 2.82 oz (80 g)

HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output: 12 mW
Spurious Emissions: Under federal regulations
Microphone Element: Dynamic, unidirectional
Batteries: Two 1.5V AA alkaline (not included)
Current Consumption: 150 mA typical
Battery Life: Approximately 9 hours (depending on battery type and use pattern)
Dimensions: 9.02" (229.0 mm) long x 2.11" (53.5 mm) maximum diameter
Net Weight: 7.81 oz (221.5 g)
Accessory Included: AT8456a Quiet-Flex stand clamp

AT829cW Wireless Microphone
Terminated with locking 4-pin connector for A-T UniPak body-pack wireless transmitters. 55" (1.4 m) cab
Reviews
Loading....
See All Audio-Technica Lavalier Microphone Wireless Systems
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.