- #J18915 000001001 J18915000001001
BAE 1032 Rackmount
With Power Supply Pair
- Write a Review
BAE Audio is known for manufacturing high-end microphone preamps and EQs that are faithful to original vintage designs from the 70s and earlier. BAE ...Click To Read More About This Product
6-Month* financing available.
Single-unit rackmount inspired by the classic 1081.
BAE Audio is known for manufacturing high-end microphone preamps and EQs that are faithful to original vintage designs from the 70s and earlier. BAE prides itself on using high-end transformers for their products, and everything is kept as close to the vintage philosophy as possible. Not only does BAE choose the highest quality components, they also insist that everything is hand-wired/soldered using discreet electronics and not economized on a circuit board.
The 1032 4-band Mic/Line preamp by BAE was inspired by the frequencies of the classic 1081. It uses the same high quality components and manufacturing techniques used in other BAE modules featuring the same Class A transformer-coupled circuits and same modular cards for long-term serviceability.
Along with the passive inductor high-pass filter, the 4-band equalizer provides greater coverage. The high-mid and low-mid frequencies overlap for flexibility in correcting problem frequencies. The 1032 also provides a more comprehensive high frequency shelf up to 24kHz for extended high frequency correction without compromising the midrange.
Inspired by the 1081 EQ points using the same inductor specifications
Class A transformer-coupled
Hand wired, all discrete using modular cards
4-band with HPF. Low and High Mid-band overlapping frequencies
Extended selection for high frequency shelving
High quality Swiss made Elma rotary switches
As close to the original as you can get, order yours today!
+/-16dB selectable frequency shelving at 10, 12 or 16 kHz.
+/-16dB with selectable frequency shelving of 35Hz, 60Hz, 110Hz & 220Hz.
1081 Upper Mid Frequency:
+/-18dB peaking, fixed 'Q' , selectable centre frequencies of 1.5Khz, 1.8kHz, 2.2Khz, 2.7kHz, 3.3Khz, 3.9kHz, 4.7kHz, 5.6kHz , 6.8kHz and 8.2Khz , inductor based.
1081 Lower Mid Frequency:
+/-18dB peaking, fixed ´Q´, selectable center frequencies of 220Hz, 270Hz, 330Hz, 390Hz, 470Hz, 560Hz, 680Hz, 820Hz, 1000Hz and 1200Hz, , inductor based.
High Pass Filter:
18dB per octave slope, switchable between 50Hz, 80Hz & 300Hz, inductor based.
Engages the equalizer.
Mic Input Impedance:
HI, 1200 Ohm minimum, LO, 300 Ohm.
Line Input Impedance:
10KOhms bridging, transformer balanced and floating.
Less than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms.
Greater than +26dBm into 600 Ohms, greater than +32dBu into 10KOhms.
Less than 0.025% at 1Khz, Less than 0.05% at 100Hz.
20Hz (+0.3dB) to 20Khz (-0.2dB).
Slightly greater than 80dB.
Less than -100dBm.
110 mA @24VDC.
Musician's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
- Unexpected and unintentional spills, drops and cracks
- Normal wear and tear
- Power surges
- Dust, internal heat and humidity
Other plan features include:
- For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
- For products under $200 experiencing the above failures, a Musician's Friend gift card will be issued for the full price of the product + tax.
- Shipping fees covered if required for repair or replacement
- Plans are transferable in the event merchandise is sold
- Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions (Opens in new window) for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.