BIGGEST COUPON OF THE YEAR: 17% off qualifying orders of $99+Shop Now
  • Shop by Category
  • Hot Deals
  • Looking for Coupons? Call us

MF MD HG Backstage Pass Free Shipping 09-30-16
Behringer Logo
Product 631245

Behringer DJX700 5-Channel Pro DJ Mixer with Digital Effects and BPM Counter   

  • Write a Review

The Behringer DJX700 Pro DJ Mixer will liven up your events. You get a 5-channel DJ mixer loaded with must-have groove features such as high-grade 45...Read More

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
OVERVIEW

Your tool for cooking up shows that kill the crowd!

The Behringer DJX700 Pro DJ Mixer will liven up your events. You get a 5-channel DJ mixer loaded with must-have groove features such as high-grade 45mm Ultraglide faders with 500,000-cycle life expectancy. Behringer's VCA (Voltage Controlled Amplifier) technology goes hand-in-hand with the faders -- the audio signal does not run directly through them; instead, the faders only provide a control voltage to the VCAs. The advantage: practically no audio noise caused by mechanical wear.

Your crowd will be astounded by the 47 breathtaking digital effect presets in 24-bit quality. They include delay, reverb, flanger, filter, panner, ultrabass, exciter, Vinylizer, voice changer, and more.

Beatmatching tracks is a cinch with the intelligent BPM counter. Features like Sync Lock and Beat Assist help you seamlessly align 2 tracks without having to rely solely on your ears.

The awesome XPQ 3-D surround function widens the stereo image and adds life and transparency to your sound.

The improved ULN (Ultra Low-Noise) preamps keep your sound clean with nothing added. You get maximum headroom, minimal noise, and ultratransparent sound.

FEATURES
  • Professional 5-channel DJ
  • High-grade 45mm Ultraglide faders with 500,000-cycle life expectancy
  • VCA (Voltage Controlled Amplifier)
  • 47 breathtaking 24-bit quality effects
  • Effects include delay, reverb, flanger, filter, panner, ultrabass, exciter, Vinylizer, voice changer, and more
  • Intelligent BPM counter
  • Sync Lock and Beat Assist help you align tracks
  • XPQ 3-D surround function widens the stereo image and adds life and transparency
Reviews
Loading....

Review Snapshot

by PowerReviews
 
3.3

(based on 41 reviews)

Ratings Distribution

  • 5 Stars

     

    (9)

  • 4 Stars

     

    (11)

  • 3 Stars

     

    (8)

  • 2 Stars

     

    (8)

  • 1 Stars

     

    (5)

Most Liked Positive Review

 

Strong and weak points.

DO NOT expect this to be a direct replacement to a DJM-600! It isn't. What it IS a very nice, cheap, easy to use mixer. I'm on my 3rd one, so...Read complete review

DO NOT expect this to be a direct replacement to a DJM-600! It isn't. What it IS a very nice, cheap, easy to use mixer. I'm on my 3rd one, so I believe I've pretty well found all it's strong and weak points. Lets take things one at a time... Sliders. I maintain ALL of my equipment after EVERY gig. I have found (after destructing the first DJX) that you have to CLEAN and LUBE them if you expect them to last anytime. Commercial contact cleaners work fine for this. BUT over time (about 2-2 1/2 years) the top end will wear out and give "pops" at the end of the throws. Especially with the master volume. Effects. Not too shabby, who the heck uses all of the presets anyways? I only use about 5 (KAOSS RULZ!!) The on/off button breaks easy..BAD design there. What happens there is ANY rotation on the button breaks the flimsy hinge. Fix for this...open the unit, lift the top board, stick a small screwdriver in and rotate the button until the little tit is back on top of the internal micro switch. Put it back together and learn to press straight down without ANY rotation. Boards # 2 & 3 were taken apart and the hinge was reinforced with flex epoxy. No more probs on that to date! Channel bleed through. Not much you can do on that one with out replacing the rotary switches and adding a 200k resistor to each channel. WARNING!!! THIS IS NOT A HACK FOR NEWBIES!!! Earphone jack. Replace the cheap jack with a better one. Simple solder job there. Top selector switch levers. Pull the levers off and put a drop of super glue on the top of the switch itself. Keeps you from losing them! No probs with anything else that I would normally expect with a mixing board that gets USED, not babied. I use the heck out of mine, It saves the wear and tear on my '600.

VS

Most Liked Negative Review

 

Behringer DJX700

I have read all these reviews and I still went out and bought this mixer anyway. I just bought this mixer and as soon as I pluged it in, the sound quality was very...Read complete review

I have read all these reviews and I still went out and bought this mixer anyway. I just bought this mixer and as soon as I pluged it in, the sound quality was very poor. The line level inputs were very low, I had to turn the input volume up to max just to get any sound out of it. There is dead space (no sound) from the min to the center of the input volume controls. The other problem I found is I could not lower microphone volume (there was a lot of feedback because the mic volume was to high) but the only way I can turn it off was with the mic on/off switch. It also got hot under power supply. I try to exchange it at the store for another one thinking this new one I got was defective and right out of the box at the store we tested it and the next one had the same problems. I have owned other mixers and none of them ever worked this poorly. Save your money! buy a basic mixer with less features that has better quality electronics.

Reviewed by 41 customers

Displaying reviews 1-10

Back to top

Previous | Next »

(0 of 1 customers found this review helpful)

 
3.0

Decent but flawed.

By Mindjack

from Nashville, TN

As a bunch of people stated, it's good for bedroom DJs. I've owned one for close to 6 months, still goin good, but I would never use it for a show. The channel level lights aren't the most accurate things in the world, which can make it hard to get good volume levels without a moniter, and the effects are crap. Also, note that the bpm counter does not go ever 160 bpm, and even under 160, in my experience is unreliable. Good for a bargain, overall.

(1 of 1 customers found this review helpful)

 
3.0

Not bad but not reliable

By The City Slicker

from Washington D.C.

This mixer is not bad but it does not hold up well. It has good sound, nice features, but the output is low. The FX are NOT GOOD! I kept mine in a Odyssey Flight Case, took care of it, used it at clubs and parties and after 8 or 9 months it just broke down on me. This mixer is good for a beginner or a bedroom DJ but it is not to be mistaken for a serious DJ mixer.

(1 of 1 customers found this review helpful)

 
5.0

i dont know why everyone hates this mixer

By Anonymous

from Undisclosed

I just got this mixer a couple days ago. It works like a charm [except for the effects] effects are the only this that dont really work on this mixer. This mixer is a great bang for your buck, seriously. The EQ's are pretty good I think they work phenomenal. I suggest you read the manual first though, if you try using it like I did before reading the manual you'll get turned off in a second & want to get rid of it. It's actually a great mixer, not a pioneer or A&H but it gets the job done. As far as reliability I have yet to find out. Just take care of your baby and she'll take care of you. Remind you that this is NOT a professional top dog mixer, If you're a professional then you probably shouldnt be looking at behringer mixers. Then again IMO very few of us are actually "professionals", so you shouldnt be judging equipment form a professionals P.O.V. seeing as how you WONT be using it like a professional does. BOTTOM LINE: If you're looking for a back up or a bedroom mixer try the djx700, I like it.=]]

(1 of 1 customers found this review helpful)

 
5.0

Great Value

By DJ. Joey V.-_9XNM

from Brick, NJ

Disregard any negative reviews you may have read. This is a nice mixer that is easy to use and sounds surprisingly good. Why spend hundreds more on a Pioneer when this does the same thing? My only complaintsare it needs balanced (XLR) outputs for powered speakers and some of the plastic knobs are somewhat fragile. I highly recommend putting this mixer in a case or coffin to protect it. Other than that, Behringer hit the nail on the head with this mixer!

(1 of 1 customers found this review helpful)

 
4.0

Great Low Priced Mixer!

By ShaneB

from FL

I enjoy useing this mixer! It is not a Pioneer 600 mixer but does have the same layout. MIXER- Great! 4 channels and a mic. FX- OK, only about 5 or 7 of them work well and sound good. BPM Counter- OK, most of the time you have to hit the tap button when playing breaks but with a stright beat it works very effectively. Not too heavy. Unit gets a little hot but that is only beacuse the AC is inside the mixer and not part of the power cord. KILLS- Great(the pioneer 600 mixer does not have these)! DO NOT max out master or levels or you will ruin this mixer! Keep the levels below or at the second yellow NO higher. READ THE MANUAL and you will learn a little bit more how the BPM counter and effects work! Overall Good mixer...

 
5.0

acceptional mixer for the price

By Anonymous

from Undisclosed

if you're a dj on a small budget like i was, then this is probably going to be your first pick. although most of the effects dont work all that well and the bpm counter is always off. The sound leaks and the xfader doesnt cut all that sharp but due to my small budgets, this is the best mixer i could have gotten. it really isnt as bad as i just made it seem.

 
4.0

Better than my Numark

By Dj Nameless

from Vancouver, BC

I personally never would have bought this mixer. First of all its Behringer. Actually, that's enough reason right there. So, I acquired this mixer from a guy who likes to DJ and who I invited to my Valentines party earlier this year. To be honest, I kinda like the sound, it's a ghetto mixer, but the sound it much fuller than my previous mixer, the Numark 1010. As for a free mixer, I can't complain. EXCEPT:I plugged it in and 2 channels of the 4 are dead. The master channel is only working on 1 side. Luckily there are 3 outputs!The FX all sound the same and they are horrible at that. Might be alright for the occasional boring break down, because you can fade them in...:-)It's big and looks, but I've played on the real thing and this mixer is no bad ass like the Pioneer DJM series. Alternatively, I enjoy the new sound and I will for sure have fun making some new disks.

 
5.0

Strong and weak points.

By DIGITAL MIZCHIEF

from Locust Grove, VA

DO NOT expect this to be a direct replacement to a DJM-600! It isn't. What it IS a very nice, cheap, easy to use mixer. I'm on my 3rd one, so I believe I've pretty well found all it's strong and weak points. Lets take things one at a time... Sliders. I maintain ALL of my equipment after EVERY gig. I have found (after destructing the first DJX) that you have to CLEAN and LUBE them if you expect them to last anytime. Commercial contact cleaners work fine for this. BUT over time (about 2-2 1/2 years) the top end will wear out and give "pops" at the end of the throws. Especially with the master volume. Effects. Not too shabby, who the heck uses all of the presets anyways? I only use about 5 (KAOSS RULZ!!) The on/off button breaks easy..BAD design there. What happens there is ANY rotation on the button breaks the flimsy hinge. Fix for this...open the unit, lift the top board, stick a small screwdriver in and rotate the button until the little tit is back on top of the internal micro switch. Put it back together and learn to press straight down without ANY rotation. Boards # 2 & 3 were taken apart and the hinge was reinforced with flex epoxy. No more probs on that to date! Channel bleed through. Not much you can do on that one with out replacing the rotary switches and adding a 200k resistor to each channel. WARNING!!! THIS IS NOT A HACK FOR NEWBIES!!! Earphone jack. Replace the cheap jack with a better one. Simple solder job there. Top selector switch levers. Pull the levers off and put a drop of super glue on the top of the switch itself. Keeps you from losing them! No probs with anything else that I would normally expect with a mixing board that gets USED, not babied. I use the heck out of mine, It saves the wear and tear on my '600.

 
4.0

Exceptional price and features for a home setup.

By Aaron-HYC0L

from Seattle, WA

I've been spinning trance and progressive at home and at small house parties for five years, now.I own three mixers - Denon x1500, Pioneer DJM400, and the Behringer DJX700. I bought the DJX700 as a "party mixer" so that I don't have to remove my x1500 from my home studio setup. I've used this mixer with both vinyl and CDJs. Both have worked as expected. Sound quality is good, features are solid, and the layout is exactly the same as the Pioneer DJM600.The BPM counter is, as many people have said, sub par. However, I would argue that if you're going to rely on a BPM counter for your mix, then you might as well just use a computer setup instead of sinking thousands of dollars into equipment.As far as everything else goes, you don't really get what you pay for on this one; you get a lot more. I was impressed with the feature set that this thing boasts for the money. Of course, I've always been impressed by the price point on all of Behringer's equipment. I'd never buy any of their speakers but as far as solid party gear goes, there's nothing more affordable.

 
4.0

suprising

By Dj Flak

from oregon

Despite bad reviews, I have had great experience. I have owned it for 2 and half years with NO problems. It works great. The only thing I don't like is the bass EQ curve. It has been at outdoor parties and been in constant use for 2 years running. It?s working like a tank. Maybe I got lucky, but I am glad I have it.

Displaying reviews 1-10

Back to top

Previous | Next »

See All Behringer Multi Channel DJ Mixers
Ship To: US Flag
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.