Skip to main content
Play Video

EP4000 EUROPOWER Power Amp

We're sorry-this item is unavailable.
Contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Overview

Powerful, road-tough unit for medium and larger gigs.

The Behringer Europower EP4000 is a professional-grade stereo power amplifier packing enough juice to rattle your bones. Designed for massive live sound reinforcement, its dual channels each pump out a thunderous 2,000W of peak power into 2-ohm loads—more than enough to drive full-size PA rigs to face-melting levels. With the Behringer Europower EP4000 amplifier, you get earth-shaking volume and pristine sonic precision.

Massive 2,000W Peak Power Delivers Thunderous Volume

Packing high-current output transistors and a beefy toroidal transformer, the Behringer EP4000 delivers up to 2,000W of peak power per channel into 2-ohm loads. Connect it to large-format speaker arrays and you'll have all the amplification you need to fill stadiums, arenas and festival grounds with powerful, room-filling sound. The EP4000 puts out 1,400W per channel into 4 ohms as well—ideal for powering full-range mains and monitors. And running in bridge mode, it delivers a monstrous 4,000W into 4 ohms, enough for massive subwoofer arrays.

Accelerated Transient Response Ensures Punchy, Articulate Sound

Behringer's proprietary ATR technology gives the EP4000 exceptional sonic clarity and detail. By improving the amplifier's slew rate and damping factor, ATR results in precise, punchy bass, articulate mids and shimmering highs. Snare hits snap with authority, guitar tones bite and cymbals shimmer with realistic decay. Vocals and lead instruments shine through the mix. Even at extremely high volumes, your sound stays clean and free of distortion thanks to ATR.

Low-Frequency Filters Remove Unwanted Bass

Unruly sub-bass frequencies can muddy up a mix and strain speaker cones. The EP4000 lets you filter out excessive low end with adjustable high-pass filters on each channel. Set the filters anywhere from 10Hz–400Hz to remove sub-sonic rumble and tighten up low end. It's a great way to optimize your rig for the room without compromising headroom and dynamics.

Features

  • 2 x 2,000 Watts into 2 ohms; 2 x 1400 Watts into 4 ohms; 4,000 Watts into 4 ohms (bridge mode)
  • Precise Power, Signal and Clip LEDs to monitor performance
  • XLR and 1/4" TRS input connectors for compatibility with any source
  • Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
  • Selectable low-frequency filters (30Hz or 50Hz) remove distracting infra-sound frequencies
  • Independent limiters per channel offer reliable protection against overload and distortion
  • High-current toroidal transformer for ultra-high transient response and absolute reliability
  • Ultrareliable Toshiba/Fairchild power transistors
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
  • Back-to-front ventilation system including air filter for reliable operation
  • "Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by Behringer Germany

Order now and get this great power amp to go.

Specs

EP4000 EUROPOWER Power Amp Specifications:

Output Power
  • 20Hz“20kHz @ 0.1% THD, both channels driven:
  • 8Î per channel-550W
  • 4Î per channel-950W
  • 2Î per channel-1250W
  • RMS @ 1% THD (sine wave), bridged mode:
  • 8Î-1750W
  • 4Î-2400W
  • Peak Power, both channels driven:
  • 8Î per channel-750W
  • 4Î per channel-1400W
  • 2Î per channel-2000W
  • Peak Power, bridged mode:
  • 8Î-2800W
  • 4Î-4000W
  • Distortion:
    <0.02%
  • Frequency Response:
  • At 10dB below rated output Power-20Hz“20kHz,
  • At -3dB points-5Hz“50kHz
  • Damping Factor:
    >300 at 8Î
  • Noise: -100dB unweighted, 20Hz“20kHz
  • Voltage Gain: 40X (32dB)
  • Input sensitivity: 1.15V (+3.4dBu) VRMS at 8Î
  • Input impedance: 10kOhm unbalanced, 20kOhm balanced
Controls:
  • Front: Power switch,gain control (channels 1 and 2)
  • Rear: DIP switches (10x)
  • Indicators:
  • Power: Green LED
  • Clip: Red LED, 1 per channel
  • Signal: Yellow LED, 1 per channel
  • Inputs: Balanced XLR and 1/4" TRS connectors
  • Outputs: Touch-proof binding posts and professional speaker connectors
  • Cooling: Continuously variable-speed fan, back-to-front airflow
  • Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection
  • Load Protection: Turn on/off muting, AC coupling
  • Output Circuit Type: Class H complementary linear output
  • Mains Voltage/Breaker:
  • 100-120V, 50/60Hz, 15 amps
  • 220-230V, 50/60Hz, 8 amps
  • Power Consumption: 2600W
  • Mains connector: Standard IEC receptacle
  • Dimensions: 19"W x 3-1/2"H x 15-4/5"D
  • Weight: 37lb.
Shop with a Friend
Free Shipping
  • Free Standard Ground shipping (48 contiguous states, some overweight and Used/Vintage items excluded).
  • Orders placed before 3 p.m. ET usually ship the same business day.
Learn More
2-Year Free Warranty on Guitars

Every guitar or bass you purchase from Musician's Friend (electric or acoustic, New or Open Box) includes two years of protection from manufacturer defects.

Contact Us for Details
We're Here for You

Our Gear Advisers are available to guide you through your entire shopping experience. Call or Chat for expert advice and to hear the latest deals.

Contact Us
Proactive Advisor Support Chat