Save up to 15% off with code: STRETCH Shop Now
Looking for Coupons?Call us 800-449-9128 Hablamos Español  
MF MD HG Call & Save
Behringer Logo
Product 631240

Behringer PMH2000 Europower Powered Mixer   

  • Write a Review

The Behringer PMH2000 Europower Powered Mixer is packed with features that are great for live gigs. The PMH2000 gives you 6 mono channels with ULN mi...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
OVERVIEW

Just plug in and play!

The Behringer PMH2000 Europower Powered Mixer is packed with features that are great for live gigs. The PMH2000 gives you 6 mono channels with ULN mic/line preamps with -25dB pads and peak LEDs, switchable phantom power, super-musical 3-band EQ, plus independent effects and monitor sends. In addition, you get 4 stereo channels: 3 with the same ULN mic/line preamps, EQ, and sends, but with left and right 1/4" connectors, plus one channel especially configured for tape, CD, or MD players with stereo RCA inputs and recording outputs.

The PMH2000 also features a built-in 250W stereo power amplifier and a flexible master section, including 2 - 9-band graphic equalizers that can be assigned to left and right main mix or to main mix and monitor out, augmented by a switchable low-cut filter for channels 1-6. Both graphic EQs feature an in/out switch for quick comparisons or bypassing. Power amp inputs are available for connecting external mixers or sound sources, and there are 3 preamp outputs for added flexibility. A footswitch connector allows you to remotely bypass the effects section with a standard footswitch.

The main and monitor sections each feature individual level controls, a 5-segment LED level meter, and a master effects send level control. In addition, the integrated limiter offers effective protection against speaker overloads.

Last but not least, the PMH2000 sports a 24-bit effects unit based on Behringer's Virtualizer Pro and Modulizer Pro effects processors. It delivers 99 great-sounding presets ranging from standard reverb and delay to more unusual algorithms like Vinylizer, Magic Pitch, Vocal Distortion, and Space Radio. All of this power and potential is enclosed in a compact, rugged enclosure with tough vinyl covering, high-impact protective corners, and a practical handle.

FEATURES
  • 250W stereo amp
  • 6 mono mic channels with 3-band EQ, phantom power, effects sends, and monitor sends
  • 4 stereo channels with EQ and sends
  • Preamp outs
  • Dual 24-bit effects processors
  • Master graphic EQs
SPECIFICATIONS

PMH2000 Europower Powered Mixer

  • Mic inputs-
    Type: balanced XLR
    EIN (20Hz-20kHz)-
    0 OHM source resistance: -122db/125dB A-weighted
    50 OHM source resistance: -122db/125dB A-weighted
    150 OHM source resistance: -121db/124dB A-weighted
    Frequency response-
    -1dB: <10Hz-100kHz
    -3dB: <10Hz - >200kHz
    Gain: +33dB; +8dB with pad
    Max input level: +12dBu @ 8dB gain
    Impedance: approx. 2.2k OHM balanced/ 1.1k OHM unbalanced
    Signal-to-noise: 110dB; 114dB A-weighted (-11dBu in @ +33dB gain)
    Distortion: 0.001%; 0.0008% A-weighted

    Mono line inputs-
    Type: balanced 1/4" TRS
    Impedance: approx. 80k OHM balanced/ 40k OHM unbalanced
    Max input level: +30dBu

    Stereo line inputs-
    Type: unbalanced 1/4" TRS
    Impedance: approx. 40k OHM unbalanced
    Max input level: +28dBu

    EQ-
    Low: 60Hz, +/- 15dB
    Mid: 700Hz, +/- 15dB
    High: 6kHz, +/- 15dB

    preamp outputs-
    Type: unbalanced 1/4" TRS
    Impedance: approx. 1.5k OHM
    Max output level: +21dBu

    Power amp inputs-
    Type: unbalanced 1/4" TRS
    Impedance: approx. 47k OHM
    Max imput level: +21dBu

    DSP-
    Converters: 24-bit TI and Sigma Delta, 64/128X oversampling
    Sampling rate: 46.875kHz

    Noise-
    Main mix@-inf, channel fader @-inf: -76dB/-80dB A-weighted
    Main mix@0dB, channel fader @-inf: -72dB/-76dB A-weighted
    Main mix@0dB, channel fader @0dB: -71dB/-75dB A-weighted

    Power amp
    Output-
    Stereo mode: 250 watts into 4 OHM; 180 watts into 8 OHM
    Bridged mono mode: 500 watts into 8 OHM

    Loudspeaker-
    Connector: Neutrik Speakon
    Load impedance-
    Left/monitor: 4/8/16 OHM
    Right/mono main: 4/8/16 OHM
    Bridged: 8/16 OHM

    Power supply: 120V/60Hz
    Power consumption: max 1kW
    Fuse: T 10 A
    Plug: standard IEC
    Dimensions: 18-1/8"W x 11"H x 10-5/8"D
    Weight: 33 lbs.
Reviews
Loading....

Review Snapshot

by PowerReviews
 
4.6

(based on 92 reviews)

Ratings Distribution

  • 5 Stars

     

    (71)

  • 4 Stars

     

    (15)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (6)

  • 1 Stars

     

    (0)

Most Liked Positive Review

 

Great for the soloist!

I bought mine a little over 2 years ago and have never had any problems with the unit so far. I would like to see Behringer come out with a heavy duty carrying case...Read complete review

I bought mine a little over 2 years ago and have never had any problems with the unit so far. I would like to see Behringer come out with a heavy duty carrying case for it though as I'm on the road quite a bit these days. The power of this unit is amazing and have all the power I will ever need. The effects are great. But only use #61(Chorus & Reverb for vocals) In fact at some gigs I've been told that it could be turned down some. My set up is 2 JBL EON1500's, one Shure Beta 58A microphone, 1 1984 Martin D-12-28 with LR Baggs LB12 aftermarket electronics, 1 2003 Martin J1216GT with same electronics, 1 Rickenbacker 360/12VP Fireglo, all Monster cables, one Boss Compression/Sustainer CS-3 (for the Rickenbacker) and one Ibanez PH7 Phaser for the Martins. Only negative things I can say about this unit is that your speakers cables on one end have to be speakon hookups going into the unit. I use my Martins in either channels 5 or 6 as other channels cannot handle the LR Baggs coming from my Martins and speakers keep clipping out. LR Baggs too hot! Also I would like it if you could tailor each channel individually for each effect. As it is when you select an effect, all the channels have the same effect. This may be a drawback to some musicians, but for me I use only effect #61 on the unit. But dollar for dollar, you simply can't go wrong. If you're tight on a budget, this will do the job. I don't know if I would recommend this unit for 4 or 5 piece bands, but for me as a 12 string guitar soloist it does the job for me nicely. I highly recommend this to the soloist. You simply can't go wrong. I rest my case.

VS

Most Liked Negative Review

 

Not impressed

Makes a nice little practice mixer... and thats about it. Needs more power. I cant get enough volume out of it to keep up with my band. I wish it was crisper...Read complete review

Makes a nice little practice mixer... and thats about it. Needs more power. I cant get enough volume out of it to keep up with my band. I wish it was crisper too. The highs should be up around 12khz. I cant really crispen up things with the onboard EQ. The board is also very noisy. The mic inputs are not quiet, the fan is loud, the efx have a nice hiss and the outputs are not queit. This really sucks when you try to record. It also isnt the cleanist board either. The outputs are very muddy and I dont like them. However it does seem built rather well. I dropped it and everything seems fine. But Im much happier with my Mackie 406M now. It is much cleaner and better sounding. Save you money folks and get something better.

Reviewed by 92 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

PMX2000

By Coag

from High Point, NC

See all my reviews

Great Value, Lots of Features, Build Quality is good.

 
2.0

A lot of bang for your buck !

By Valid Proof Bassman

from New Lenox, IL

Plenty power and lots of extras for the price. We(our band)haven't had this amp for very long,but it's been through about 8 practices and 2 gigs with great sound,power to spare,and flexibility that we really haven't had a chance to fully explore. I might give it a higher rating in months to come if it hangs in there as far as durability. Amps with similar features and equal power were twice the price.

 
4.0

It is what it is - good for the price

By Ironic Punishment Division

from Cleveland - poorest city in America

It's good for rehearsals, but let me state up front that I have not used it live yet and I'm not sure I will. I was looking to use this as a stand alone unit to drive mains and monitors at smaller venues, but I'm just not sold on it yet. The biggest drawback to this thing is that there is NO EFFECTS LOOP! Disregard that misleading stuff about each channel having "effect sends" - technically it does, but all you can send the signal to is the internal processor, of which the reverbs and delays are somewhat cheesy and overkill. There are a couple decent effects at best, but you have to play around a lot to find usable ones and mix them just right. You're better off using a dedicated rackmount, which of course you have to run the mic(s)into PRE-mixer. Speaking of- If you want to have compression on your vocals (and believe me...you do!) you need to process the mic signal before it gets to the mixer also. I really can't believe there is no loop/sidechain on this thing! Not so "standalone" now, is it?If you can get past that, you're good to go. Flexible EQ, just barely loud enough (keep in mind the style of music i'm doing), decent sound driving 2 15's, and well...lets address the real reason you're looking at it - it's inexpensive.

 
2.0

Not impressed

By Mr. Ed

from md

See all my reviews

Makes a nice little practice mixer... and thats about it. Needs more power. I cant get enough volume out of it to keep up with my band. I wish it was crisper too. The highs should be up around 12khz. I cant really crispen up things with the onboard EQ. The board is also very noisy. The mic inputs are not quiet, the fan is loud, the efx have a nice hiss and the outputs are not queit. This really sucks when you try to record. It also isnt the cleanist board either. The outputs are very muddy and I dont like them. However it does seem built rather well. I dropped it and everything seems fine. But Im much happier with my Mackie 406M now. It is much cleaner and better sounding. Save you money folks and get something better.

 
5.0

The best mixer in its price range...bar none!

By BlessedMan24-7

from Dunbar, WV

This mixer is the best I have heard in its price range. My brother would play on nothing but Peavey until he heard this unit. The effects are wonderful!!! 5-stars!!!

 
5.0

I love behringer!

By Groovielou-7e4lT

from Chino Hills, Ca

See all my reviews

A 10 Channel Powered mixer for under $***? Naw, somethings wrong here. I remember my parents telling me, "If its too good to be true, it probily isn't". I just had to get my hands on one of these puppies. This piece of equipment would have a special dual use in my Mobile DJ Business. Firstly, it serves as a part of a P.A. rental system that I offer. Secondly, it is a crutial piece of back up equipment in case of emergency.I have truly put this piece through its paces. Hours on end at 4ohm and it never hiccupped. The knobs are a bit flimsey and the headroom is fairly limited. But overall, this is a sold unit, you could not ask for a better value. Actually, you CANT find a better value.

 
5.0

A Great Powered Mixer

By Tomcat-RkN76

from Louisville, KY

See all my reviews

For the money and considering the features, this is the best value around. I'm very pleased with the performance. Great features. The DSP effects are pretty good with lots of cool presets. It was a good buy for my home studio and it is powerful enough to gig with.

 
5.0

Review

By c4mg0A1HW

from St. Louis, MO

Great deal!!! Perfect for the starter. I use mine for a 6 Piece live rock/ Blues band. It kicks, even outdoors. great effects. It has a perfect sound and control for DJ use. I drive two 15" full sound Peavey's W/ no problem. So far with 9 months use going strong.

 
2.0

Stay away

By Bill in pittsburgh

from Pa

See all my reviews

This is too underpowered for even a rehearsal room. Behringer P.a. stuff is very noisy and LOW quality. Save your money and buy some decent gear. You get what you pay for.

 
5.0

Very efficient,highly recommended.

By KOOLDAVE-Ogt8g

from Pittsfield,MA

I've had the opportunity to road test this product for just about three months now..very light weight and ease of operation.My tech man was equally impressed as well.As a matter of fact, I'm getting ready to purchase a second PMX2000 soon. This is one great product.

Displaying reviews 1-10

Back to top

Previous | Next »

See All Behringer Powered Mixers
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.