BIGGEST COUPON OF THE YEAR: 17% off qualifying orders of $99+Shop Now
  • Shop by Category
  • Hot Deals
  • Looking for Coupons? Call us

MF MD HG Backstage Pass Free Shipping 09-30-16
Beyerdynamic Logo
Beyerdynamic TG V96c True Condenser Hypercardioid Live Vocal Mic   (Open Box)
Ships Internationally
  • Write a Review
Product# J05331
OVERVIEW

A stage mic that will turn heads.

The strength of the TG V96c lies in its absolutely faithful reproduction of the finest nuances and on stage every detail. The microphone's exterior stands out for its sophisticated design, with a special coated surface that is pleasant to the touch. But it is what's inside that makes the TG V96c into a top-class microphone and makes it stand out with vocalists, professional rental companies and sound technicians; this true condenser microphone shines with a captivatingly natural sound. The subtle treble boost provides an open, finely detailed and unobtrusive sound pattern. Further advantage: the TG V96c can be operated with 24 volt phantom powering without affecting the performance. The 5-layer pop protection made from metal gauze of differing mesh sizes and a sintered plate optimally suppresses plosives while significantly improving the rear-attenuation. The TG V96c is rugged enough for the stage and is supplied with an individual frequency response curve print out. Handcrafted in Germany.

FEATURES
  • High-quality vocal microphone
  • Frequency-independent cardioid polar pattern
  • Compensated proximity effectt
  • Wire mesh basket without foam
  • Shock mounted microphone transducer and electronics

For the discriminating vocalist. Order today.

SPECIFICATIONS

TG V96c True Condenser Hypercardioid Live Vocal Mic

  • Transducer type: Condenser
    Operating principle: Pressure gradient
    Polar pattern: Cardioid
    Frequency response
    Close miking: 20 - 20,000 Hz
    Distant miking (measured at 1 m): 55 - 20,000 Hz
    Open circuit voltage: 4 mV/Pa (-48 dBV) ±2 dB
    Nominal impedance: 60 Î
    Load impedance: ‰ 1 kÎ
    Max. SPL at 1 kHz: 150 dB
    Signal-to-noise ratio: 64 dB [CCIR, Q-Peak]
    Equivalent SPL: 20 dB [A, RMS]
    In-phase rejection 50 - 20,000 Hz. . . ‰ 60 dB
    Power supply: Phantom power: 24 - 48 V
    (recommended: 48 V)
    Current consumption: 4.3 mA
    Connection: 3-pin male XLR,
    1 = ground
    2 = +
    3 = -
    Dimensions
    Length: 7.3" (185 mm)
    Shaft diameter: 1" (26 mm)
    Head diameter: 1.89" (48 mm)
    Weight: 11.65 oz. (330 g)
Reviews
Loading....
Ship To: US Flag
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.