Limited time offer: Save up to 15% off with code: "MEMORIAL" Shop Now >>
Looking for Coupons?Call us 800-449-9128 Hablamos Español
MF MD HG01 Memorial Day Call & Save 05-22-17
Blue Sky Logo
Product 609102

Blue Sky SUB 8 Universal Active Studio Subwoofer   

  • Write a Review

The Blue Sky SUB 8 Universal speaker adds true low frequency extension to your existing near-field monitors with a sealed box design for more "slam" ...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:

100W compact studio subwoofer with adaptive crossover.

The Blue Sky SUB 8 Universal speaker adds true low frequency extension to your existing near-field monitors with a sealed box design for more "slam" and a bass response down to 30Hz and below. A single 8" high excursion woofer features a vented motor for low power compression, and is powered by a low-distortion 100W discrete symmetrical bipolar amplifier. The Blue Sky SUB 8 Universal features built-in 2.1 bass management, along with dual independently tunable state variable high-pass and low-pass filters (50Hz-160Hz) with 4th order slopes, which adjust the crossover point to ensure optimum system response.

The SUB 8 Universal studio speaker can be combined with Blue Sky's SAT 5 to form the highly acclaimed and award-winning ProDesk 2.1 Monitoring System.

  • Sealed box design
  • True LF response - 30Hz and below
  • 8" high excursion woofer with vented motor
  • 100W discrete symmetrical bipolar amplifier

Compact, accurate, and powerful. Order today!


SUB 8 Universal Active Studio Subwoofer

  • Speaker Enclosure
  • .75" MDF with 1" front and rear baffle
  • Isolation feet included
  • Dimensions: 13"H x 16"W x 13.37"D (15.76" with heatsink and grille)
  • Weight 48.5 lbs. (22kg)
  • 8" Hemispherical Subwoofer
  • 8" high excursion woofer
  • Vented motor structure
  • Cast aluminum frame
  • 2" voice coil
  • Aluminum alloy cone
  • Electrical Specification
  • Input Voltage: 115/230 VAC 50/60Hz switchable
  • Wattage: 200 Watts
  • Fuse: 115VAC 2A - 250 V 5x20mm (Time Delay or Slo-Blo), 230VAC 1.25A - 250 V 5x20mm (Time Delay or Slo-Blo)
  • Amplifier
  • Discrete symmetrical bipolar design
  • 100W RMS into 4 ohm
  • .01% THD + noise at rated power @ 100 Hz
  • XLR balanced input
  • Adjustable gain control
  • Voltage sensitivity: 100mv=90dB SPL@1m
  • Frequency response (SUB IN - anechoic): 35-200Hz
  • Typical in room response (SUB IN): 20-200Hz (3000 cubic feet)
  • Bass-Management
  • Input impedance: 20K balanced
  • Common mode rejection: 40dB typical @ 60Hz
  • Maximum input level: +24dBu balanced
  • Output impedance: 200 ohms balanced
  • Nominal gain: 0dB
  • SUB IN low pass filter: None
  • Switchable Filter Settings
  • SAT 5 Mode
  • High pass filter: none (uses filter in SAT 5)
  • Low pass filter: 80Hz 4th Order
  • Universal Mode
  • Dual independently tunable state variable high pass and low pass filters
  • Frequency range: 50Hz-160Hz
  • Filter slope: 4th order
See All Blue Sky Studio Subwoofers
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.