SAVE UP TO 15% OFF WITH COUPON: FINAL DAY

MF MD HG Call Save
Product 472561

CAD MG115B Condenser Microphone with Gooseneck   

  • Write a Review

The gooseneck-equipped CAD MG115B condenser mic offers low noise reproduction and a cardioid pickup pattern with wide flat frequency response. The el...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:

The gooseneck-equipped CAD MG115B condenser mic offers low noise reproduction and a cardioid pickup pattern with wide flat frequency response. The electret CAD MG115B mic is mounted on a mini gooseneck. The mic provides unsurpassed, natural, transparent sound quality, and warm sound when used close to the sound source.

CAD equips the MG115B with a cardioid pickup pattern that minimizes annoying feedback when used close to sound reinforcement speakers and monitors. The cardioid pattern also reduces picking up unwanted off axis sounds. The CAD CMG115B microphone's gooseneck has an internal stiffener to maintain a straight center section. Overall length of the CAD MG115B microphone is 15".


SPECIFICATIONS

MG115B Condenser Microphone with Gooseneck

  • Phasing: Positive Pressure on Diaphragm generates a positive voltage on pin 2 relative to pin 3
    Impedance: Low (150 ohms nominal)
    Current Required: Less than 2.0 mA over operating voltage range
    Dynamic Range: 100 dB
    Equivalent Noise Level: Less than 30 dB, A weighted
    Frequency Response: 40 Hz - 20 kHz
    Generating Element: Electret Condenser (Phantom Powered)
    Impedance: Low (150 ohms nominal)
    Maximum SPL: 130 dB (1% THD, open circuit)
    Output Level: Power Level: -46 dB (0 dB - 1 mW per 10 microbars) Open Circuit Voltage: -68 dB (0 dB = 1 volt per microbar) 4 mV/Pascal
    Phasing: Positive Pressure on Diaphragm generates a positive voltage on pin 2 relative to pin 3
    Polar Pattern: Unidirectional (Cardioid)
    Powering: Supply Voltage: 9 - 52 Vdc, positive pins 2 & 3 reverse polarity protected
    Generating Element: Electret Condenser (Phantom Powered)
    Frequency Response: 40 Hz - 20 kHz
    Polar Pattern: Unidirectional (Cardioid)
    Current Required: Less than 2.0 mA over operating voltage range
    Equivalent Noise Level: Less than 30 dB, A weighted
    Dynamic Range: 100 dB
    Maximum SPL: 130 dB (1% THD, open circuit)
    Powering: Supply Voltage: 9 - 52 Vdc, positive pins 2 & 3 reverse polarity protected
    Output Level: Power Level: -46 dB (0 dB - 1 mW per 10 microbars)
Reviews
Loading....
See All CAD Condenser Microphones
Ship To: US Flag
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.