SAVE UP TO 15% OFF WITH COUPON: LIMITED TIME OFFER

MF MD HG Call Save
Product J14601

DPA Microphones ST2011C Stereo Pair with 2011C Compact Cardioids   

  • Write a Review

The DPA ST2011C features two carefully matched 2011C cardioid microphones, a sturdy PeliTM case, mic holders, grids and windscreens. This Stereo Pair...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
OVERVIEW

Compact stereo cardioids.

The DPA ST2011C features two carefully matched 2011C cardioid microphones, a sturdy PeliTM case, mic holders, grids and windscreens. This Stereo Pair of handpicked cardioid microphones are selected on sensitivity within ±1.5 dB, which makes stereo principles such as XY and ORTF easy to orchestrate. The compact design and controlled directionality of the 2011C make this perfect pair an excellent choice for spot mics for classical recording and on-stage close mics for live sound. The foam design in the heavy-duty Peli transportation box allows for fast and easy exchange of microphone/accessory inlays. Peli Case for quality transportation and protection.

FEATURES
  • Audio
  • Frequency response: 20Hz to 20kHz
  • Max SPL: 146 dB
  • Pattern and type
  • Capsule: Condenser
  • Pattern: Cardioid
  • Type: Mounted
  • Applications: Studio, stage, theatrical
  • Phantom power required: Yes
  • Size and weight
  • Length: 3.6
  • Weight: 2.3 oz.
  • Included accessories
  • Case: Hard case
  • Clip: Hard rubber

Sensitivity selected pair with superb stage separation and level control. Order today.

SPECIFICATIONS

ST2011C Stereo Pair with 2011C Compact Cardioids

  • Directional pattern: Cardioid
    Principle of operation: Pressure gradient, with interference tube
    Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
    Frequency range: 20 Hz - 20 kHz
    Frequency range, ± 2 dB, at 30 cm: 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz
    Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
    Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 Pa (max. 23 dB(A))
    Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)
    S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A)
    Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 137 dB SPL peak
    Dynamic range: Typ. 117 dB
    Max. SPL, peak before clipping: 146 dB
    Minimum load impedance: 2 kohm
    Output impedance: < 200 ohm
    Cable drive capability: 100 m (328 ft)
    Output balance principle: Impedance balancing with Active Drive
    Common Mode Rejection Ratio (CMRR): > 50 dB
    Power supply (for full specifications): 48 V Phantom power (± 4 V)
    Current consumption: 2.8 mA
    Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
    Color: Matte black
    Weight: 64 g (2.3 oz)
    Microphone diameter: 19 mm (0.75 in)
    Microphone length: 92 mm (3.6 in)
    Output voltage, RMS: > 4 V
    Polarity: +V at pin 2 for positive sound pressure
    Temperature range: -40 C to 45 C (-40 F to 113 F)
    Relative Humidity (RH): Up to 90%
    Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB
Reviews
Loading....
See All DPA Microphones Live Microphone Packages
Ship To: US Flag
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.