- Product J07424
Dynaudio Acoustics BM9S II Studio Sub (EA)
- Write a Review
From dubstep to metal, today's bass-dependent music requires a studio subwoofer for monitoring. The Dynaudio BM9S delivers the punch and woof that wi...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
10" sub for the studio.
From dubstep to metal, today's bass-dependent music requires a studio subwoofer for monitoring. The Dynaudio BM9S delivers the punch and woof that will inform your low-end mix decisions. Dynaudio is one of the truly venerated names in professional studio monitoring.
The Dynaudio tradition continues in the new II-series subs, delivering Dynaudio's premium, professional sound quality and performance. Dynaudio Professional II-series precision subwoofers are made in Denmark using hand-crafted drivers that have made Dynaudio the industry standard in studios the world over.
The BM9S II is specifically designed to complement BM Compact mkIII and BM5 mkIII monitors, adding extended bass in smaller mixing and recording environments, but it is a logical expansion for most monitoring systems.
- 10" woofer with pure aluminum voice coil. 200W @ 4 ohm
- Phase adjustment in 0 / 180; Auto on/off, power LED;
- Selectable LFE or slave mode
- Discrete LFE input, slave output for linking
- Adjustment of low-pass corner frequencies (50-150 hz)
- Frequency response of 29 Hz to 250 hz
Order today and give your studio monitoring a more complete picture of your session.
BM9S II Studio Sub (EA)
- Model: BM9S II
System: Precision Subwoofer
Frequency Response: 29 Hz to 250 Hz
Inputs: LFE/Slave, SAT/SUB, XLR right/left full bandwidth
XLR Input impedance: + branch 20 kOhm, - branch 10 kOhm
Sensitivity: 75 mVRMS to 5 VRMS, adjustable
Max. Input voltage: 10 VRMS
Outputs: Slave, SAT/SUB, XLR right/left, High-pass filtered
XLR Output impedance: 100 Ohm (each branch)
XLR Pin-out: 1: 0 / 2: + / 3: -
Mode selector: LFE, Slave (Phase and volume controls are bypassed in slave mode
SAT: High-passFlat, 60 Hz, 80 Hz
SUB: Low-pass50 Hz to 150 Hz
Auto ON/OFF: Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min.
Amplifier power: 200 W, 4 Ohm
Power consumption: <16 W Standby, 325 W Max.
Woofer: 240 mm/10" One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4", Pure aluminum voice coil
Weight: 8,8 kg. / 19.4 lbs
Dimensions (WxHxL): 290 x 290 x 300 mm / 11.4" x 11.4" x 11.8"