- Product 601028
EAW LA400 Bent Bass Horn Subwoofer
- Write a Review
The LA400 speaker uses bass horn technology that was developed for the KF940 SuperSub. It loads a powerful 12" woofer on an expanding bass horn that ...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
Extremely high output sub bass response!
The LA400 speaker uses bass horn technology that was developed for the KF940 SuperSub. It loads a powerful 12" woofer on an expanding bass horn that is 8' in length, and provides extremely high output sub bass response in a compact, portable enclosure. The efficiency provided by EAW's advanced horn-loading techniques permits the LA400 to extend overall system frequency to the lowest octaves.
The EAW LA400 is designed to be easily transportable. The "towel bar" handle across the mouth of the horn and cut-away lower rear corner allows users to roll the LA400 onto its rear-mounted casters with a minimum of effort. Mounting the casters on the enclosure's rear lowers the system's center of gravity during transport for easier rolling and more stable packing. A stout grille protects the drivers from objects that might fall into the horn when on its back.
The LA400 defies conventional wisdom, which states that an 18" woofer is required to drive a bass horn. 18" woofers simply do not have the rigidity required to drive the high acoustic impedance present in a horn throat. As a result, traditional 18" bass bins get loud, but only produce one note very well. The LA400 in contrast uses a proprietary heavy duty 12" woofer. The woofer has the motor structure of a traditional 18" device, and its cone is reinforced to be a better engine for compact horn-loading. This woofer is then loaded onto a properly designed bass horn which matches path length to cone area and maximizes driver efficiency. The result is tight, punchy sub bass response that not only will shake your foundation, but is articulate and musical as well.
The horns of multiple speaker enclosures couple acoustically to create a single, larger horn that increases output and provides directivity to very low frequencies. Factory-recommended digital processor settings will enhance LF performance even more. The LA400 subwoofer is engineered to work as a companion to LA Series full range systems, as well as other high-output compact loudspeaker systems. Laid on its side the LA400 is only 21 inches high, which also makes it very effective in clubs and theatres where subs must be intalled under a low stage.
- Bent bass horn subwoofer
- 12" heavy duty woofer
- ±3 dB 45 - 150 Hz
- Peak output: 140 dB SPL
- For portable use or permanent installation
It only sounds enormous. Order today and enjoy especially tight, punchy, and musical sub sound.
LA400 Bent Bass Horn Subwoofer
- System Configuration: Subwoofer
- Product Group: G
- SB Subsystem & Loading: one 12" woofer, horn-loaded
- Enclosure Material: Exterior grade Baltic birch plywood
- Finish: Wear resistant textured black paint
- Connector: Two Neutrik NL4 Speakon
- Grille: Powder coated perforated steel
- Dimensions (±0.13 in / ±3 mm)
- Height: 36.00 / 914
- Width: 21.00 / 533
- Depth: 36.00 / 914
- Weights (pounds / kilograms)
- Net Weight: 125.0 / 56.8
- Shipping Weight: 133.0 / 60.5
- Frequency Response:
- ±3 db: 45 Hz to 250 Hz
- -10 dB: 40 Hz
- Recommended High-Pass Frequency: 35 Hz, 12 dB / octave
- Axial Sensitivity (dB SPL, 1 watt @ 1 m)
- Subbass: 107
- Nominal Input Impedance (ohms)
- Subbass: 8
- Power Handling (watts, continuous)
- Subbass: 500
- Calculated SPL Limit (referenced to 1 m)
- Subbass Peak: 140.0
- Subbass Long Term: 134.0
Reviewed by 1 customer
Displaying review 1
Comments about EAW LA400 Bent Bass Horn Subwoofer:
This sub is very well liked by many professional sound guys. Great bang for the buck. NOTE that they are wired on pins 2 (- +) not pins 1. This means your two conductor speaker cables will NOT work. You can rewire the subs or buy 4 conductor cable with banana jacks for the amp end (allows you to select pins 2) and Speakon on the sub side. You can't buy these cables here. If you don't understand what this means you should find out before buying them.