Up to 15% off with coupon code: SAVE10 Shop Now
Looking for Coupons?Call us 800-449-9128 Hablamos Español  
MF MD HG Call & Save
Focusrite Logo
Focusrite RedNet 4 - 8 Channel Mic/Line A-D   (Open Box)
Ships Internationally
  • Write a Review
Product# H92690

8-Channel remote controlled mic preamp and A-D interface for RedNet professional audio networking system.

RedNet is Focusrite's new flagship range of Ethernet-networked studio interfaces, based around the tried and tested Dante Ethernet audio networking system from Australian company Audinate. Focusrite's RedNet is the first to offer IP network audio interfaces for the recording studio - or any application that requires moving high quality audio around with ultra-low latency.

RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI's, RedNet 4 provides an effective range of analog inputs for your system. The unit includes Focusrite's world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.

  • Eight high-quality Focusrite mic preamps
  • Selectable line and DI inputs for input flexibility
  • Dynamic range: 119dB
  • THD+Noise: <0.001%
  • Mic input Level up to +16dBu
  • Max mic input gain: 63dB

High-end, Ethernet networking for your professional studio, order the RedNet system today.


RedNet 4 - 8 Channel Mic/Line A-D

  • Microphone Inputs
    Gain range: 0 dB; 8 to 63 dB in 1 dB steps
    Type: Classic ISA-based, electronically balanced, Zin = 2.4 kohms
    Max. input level: +16 ±0.5 dB; min. gain for 0 dBFS, Rs = 150 ohms, pad out
    Min. input level: -47 ±0.5 dB; max. gain for 0 dBFS, Rs = 150 ohms, pad out
    Frequency response: 20Hz - 55kHz ±0.1 dB (-3 dB @ 80kHz, fs = 192kHz); Rs = 150 ohms
    THD+N: < 0.0007% @ -1 dBFS; +15 dBu input, Rs = 150 ohms, 20 Hz - 22 kHz
    Noise: EIN -128 dB; 60 dB gain, Rs = 150 ohms, 20 Hz - 22kHz
    Phantom power: 48 V, independently switchable per-channel
    Signal-to-noise ratio: 119 dB ˜A'-weighted; Rs = 150 ohms
    Line Inputs
    Gain range: -12 to 42 dB in 1 dB steps
    Max. input level: +24 ±0.5 dB; min. gain for 0 dBFS
    Min. input level: -30 ±0.5 dB; max. gain for 0 dBFS
    Frequency response: 20Hz - 20kHz ±0.1 dB
    THD+N: ? 0.003% @ -1 dBFS; +23 dBu input, min.gain, 20 Hz - 22 kHz
    Signal-to-noise ratio: 117 dB ˜A'-weighted
    Instrument Inputs (Inputs 1 & 2 only)
    Gain range: +14 to 68 dB in 1 dB steps
    Max. input level: +10 ±0.5 dB; min. gain for 0 dBFS
    Min. input level: -44 ±0.5 dB; max. gain for 0 dBFS, pad out
    Frequency response: 20Hz - 20kHz ±0.1 dB
    THD+N: ? 0.001% @ -1 dBFS; +9 dBu input, min.gain, 20Hz - 22kHz
    Signal-to-noise ratio: 112 dB ˜A'-weighted
    Analogue High-Pass Filters
    Selection: Independently switchable per-channel
    Frequency/slope: -6 dB @ 65 ±3 Hz, 12 dB/octave
    Input to input: ?-80 dB (all other channels at 0 dBFS)
    Digital Performance
    Supported sample rates: 44.1 / 48 / 88.2 / 96 / 192kHz
    Clock sources: Internal or from network master device
    PSU: Internal, Universal type, consumption 30 VA
    Front Panel Indicators
    Power: Green
    Network connected: Green
    Sync lock: Green
    Sample rate: Yellow x 5
    Channel 1/2 source: Yellow x 3 (mic/line/inst)
    Signal level: Green x 8 (-42 dBFS); Yellow x 8 (-6 dBFS); Red x 8 (overload)
    Channel select buttons: 8
    Channel function controls: Input source, HPF, phantom power, Gain encoder
    Channel display: Colour OLED; channel number, input source, gain
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.