- Product 584990
Kustom PA KPC15 / Phonic MAX 1000 Spkr & Amp Package
- Write a Review
This special PA kit combines a pair of Kustom KPC15 PA speakers, a Phonic MAX 1000 Power Amplifier, and a pair of Gear One Speakon-to-1/4" cables to ...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
15" PAs, a 600W (bridged mono), 300W (stereo) power amp, and cables for connecting them.
This special PA kit combines a pair of Kustom KPC15 PA speakers, a Phonic MAX 1000 Power Amplifier, and a pair of Gear One Speakon-to-1/4" cables to hook them up.
Kustom KPC15 PA Speaker Cabinet with Horn
The Kustom KPC15 15" PA Speaker Cabinet with Horn is a great cab for medium and small gigs. It's specially voiced crossover ensures clear separation of frequencies for crisp, full-range reproduction. A 15" woofer delivers deep, rumbling low frequencies, while a 7" x 15" horn (with overload protector) produces bright high-end tones. It also features two parallel input jacks, sturdy construction with reinforced corners, and a heavy-duty Tolex covering.
Phonic MAX 1000 Power Amplifier
The Phonic MAX 1000 Power Amplifier delivers 600 Watts of power at 8 ohms (bridge mono), 300W of power at 4 ohms (stereo)-ideal for small- to medium-size venues like churches, auditoriums, and more. Input to the MAX 1000 is achieved via XLR or phone jack, and output is achieved through either Speakon-type connectors or binding posts. The MAX 1000 features ground switches, and the option to choose between stereo, parallel and bridge operating modes, making it an affordable amplifier that is exceptional for real-world application.
Gear One Speakon to 1/4" cable
This 16-gauge speaker cable is 25 feet in length and features a Speakon connector on one end and a 1/4" connector on the other.
- KPC15 PA Speaker Cab with Horn
- 15" woofer for punchy bass
- 7" x 15" horn with overload protector
- Specially voiced internal crossover provides superb separation of frequencies
- Recessed handle
- 1-3/8" polemount
- Reinforced corners
- Tolex covering
- Phonic MAX 1000 Power Amplifier
- High-current toroidal transformers for greater power and low noise
- Balanced 1/4" TRS and XLR inputs for maximum flexibility
- Grounding / Floating switch to avoid grounding loop
- Binding post and Speakon-type outputs
- Front mounted gain controls for easy access
- Signal and Peak LED indicators to monitor performance
- Short circuit, thermal, subsonic, RF protection, output DC offset
Use this power amp and booming speakers to get the dance floor packed. Order today!
KPC15 / Phonic MAX 1000 Spkr & Amp Package
- Phonic MAX 1000 Power Amplifier
200W @ 8 ohms EIA, 1kHz
300W @ 4 ohms EIA, 1kHz
Bridge Mono Mode:
600W @ 8 ohms EIA, 1kHz
Total Harmonic Distortion: 0.1%
Output circuitry: Class H
Input Sensitivity @ 8 ohms: 1.23V (+4dBu)
Distortion (SMPTE-IM): <0.01%
Noise (unweighted 20Hz - 20 kHz below rated output): 100dB
Damping Factor: >300 @ 8 ohms
Frequency Response: 20 Hz-20kHz, +0/-1dB points: 5Hz-50kHz
Input Impedance: 20 kOhm balanced, 10kOhm unbalanced
Cooling: Continuous variable-speed fan, front-to-rear air flow
Input: XLR and 1/4" TRS
Output: Speakon and binding posts
LED Indicators: Blue Power, Green Signal, Red Peak
Front Panel: CH1 and CH2 GAIN knobs with 41 detents
Rear Panel: Parallel, Bridge, and Stereo Operation Mode side switches, floating on/off switch, and Current-Break reset button
Protection Circuitry: Short circuit, thermal, subsonic, RF, output DC offset, power on/off muting
Power Consumption: 600W
Power Requirement (depends on region): 100120VAC, 220240VAC, 50/60Hz
Dimensions: 19" W x 3.46" H x 15.9" D