- Product 620246
Line 6 X2 XDR959 Lavalier Microphone Presentation Wireless System
- Write a Review
Providing total freedom, superior tone, and refreshing simplicity, the Line 6 X2 XDR959 Wireless System is a professional cardioid wireless lavalier ...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
Ideal for interviews or presentations, this lavalier system gives you wired tone, wireless freedom.
Providing total freedom, superior tone, and refreshing simplicity, the Line 6 X2 XDR959 Wireless System is a professional cardioid wireless lavalier microphone system. It's ideal for schools, business conferences, houses of worship, or any other presentation venues seeking high-quality vocal reproduction and stage-worthy reliability in a complete and easy-to-use package.
Line 6 X2 XDR959 produces a crystal-clear sound comparable to that of top-notch audio cables. The tone is rich, full, and free of compression, unlike the notoriously squashed sound of many analog wireless systems. Even at the outer reaches of its 300-foot range, the X2 XDR959 wireless system delivers the full scope of its extended frequency response.
All Line 6 Digital Wireless systems, including the X2 XDR959, protect your performance with an extra layer of signal protection. Exclusive dual-RF technology shields against static, jamming, and dropouts for additional stability and dependability.
Complete with everything you need, Line 6 X2 XDR959 includes a X2 XDR4 digital rackmount receiver and X2 XDT4 digital bodypack transmitter (both constructed of polycarbonate housings impact-tested to 300lb.), an Audio-Technica LM4 cardioid lavalier microphone, all applicable antennas, batteries, and power supply. Setup is uncomplicated”just fire it up and go.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- X2 XDR4 digital rackmount receiver
- X2 XDT4 digital bodypack transmitter (both constructed of polycarbonate housings impact-tested to 300lb.) Audio-Technica LM4 cardioid lavalier microphone
- All applicable antennas Batteries
It's wireless without any hassle. Order the X2 XDR959 system today!
X2 XDR959 Lavalier Microphone Presentation Wireless System
- Overall System Specifications
Transmission Format: Line 6 proprietary digital audio transmission
Frequency Response: 10Hz - 20kHz
Audio Dynamic Range: Greater than 118dB
Distortion: 0.03% THD
RF Carrier Frequency: 902MHz to 928MHz, FSK, dual frequency transmission
Compatible Channels: Five
RF Output Power: 15mW
Audio Output Level: Unity gain with transmitter input
Polarity: Positive voltage at input yields positive voltage at output
Transmission Range: 300 feet line-of-sight (may vary due to local conditions)
FCC Approval: Part 15 approved, no user-license required
Operating Temperature Range: -20 to +85 C (-4 to +185 F)
XDT4 Transmitter Specifications
A/D Conversion: 24-bit Delta Sigma, 128 times over sampling
Input Impedance: 1.2 M-ohm instrument input, 10K-ohm mic input
Connectors: 1/8" Unbalanced locking connector
Controls: Power On/Off, Channel Select
Five Segment LED Display: Power On, Channel, Battery Life, Audio Level Meter
Dimensions (WxHxD): 2.4" x 4" x .8", (6.09 x 10.16 x 2.03 cm)
Battery Life: 9V alkaline, switching power supply, two modes:
Q-DiversityPLUS mode: 5.5 hrs. in (dual frequency)
Q-Diversity mode: 6.5 hrs. in standard (single frequency)
Weight: .25lb. (with 9V battery installed)
Housing: Polycarbonate, impact tested to 300lb.
XDR4 Receiver Specifications
D/A Conversion: 24-bit Delta Sigma, 128 times over sampling
Output: 2.12V RMS (Unbalanced: 1.8K Ohm)
Connectors: 1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground, XLR Balanced 600 ohm
LED Display: Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter
Controls: Power On/Off, Channel Up and Down
Dimensions (WxHxD): 16.2" x 1.75" x 7.5", (41.14 x 4.44 x 19.05 cm)
Power requirements: 9V DC 500mA via included AC/DC adapter
Weight: 2.5lb. (with rack hardware and antenna installed)
Housing: Polycarbonate, impact tested to 300lb.