- Product 271183
Line 6 XDR1 Foot Pedal Receiver for the XDS95 System
- Write a Review
The XDR1 Foot Pedal Receiver is a component of the Line 6 X2 XDS95 24-Bit Digital Instrument Wireless System.The XDS95 24-Bit Digital Instrument Wire...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
Designed for use with stompboxes.
The XDR1 Foot Pedal Receiver is a component of the Line 6 X2 XDS95 24-Bit Digital Instrument Wireless System.
The XDS95 24-Bit Digital Instrument Wireless System from X2 delivers your tone and performance with the sound and feel of a direct wire connection ” all at a price that won't break the bank. Features include: 24-bit digital converters yielding 117 dB dynamic range to capture your most expressive performances without the use of companders, five simultaneously compatible channels, frequency response all the way down to 10 Hz for truly thundering lows, TRS 1/4" output for instrument and full-bandwidth or 'tuner out' applications, and a five segment LED display (battery status, link status, audio level and channel).
Operating the system is unlike any wireless you've tried before. Simply connect the transmitter to the source via the 1/8" threaded-collar locking connector and the "stomp-box" style receiver to your amplifier, mixer or pedal-board. Then power up making sure the transmitter and receiver are set to the same channel. That's it. You're ready to go! No knobs to adjust and no antennas to loose or break mean you're up and running in approximately the same time it takes to connect a cable. System includes a digital UHF bodypack transmitter,
digital UHF 'stomp-box' receiver, instrument cable, users guide and all necessary batteries.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
Go digital and enjoy interference-free performance.
XDR1 Foot Pedal Receiver for the XDS95 System
- XDR1 Receiver Specifications:
D/A Conversion: 24-bit Delta Sigma, 128 times over sampling
Output: 2.12V RMS (Unbalanced: 1.8K Ohm)
Connectors: 1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground
LED Display: Power On, Data Link, Channel, Battery Life, Audio Level Meter
Controls: Power On/Off, Channel/Mode Select
Dimensions: 3.078" W x 1.17" D x 4.7" H
Power Requirements: 9V DC 500mA via included AC/DC adapter
Weight: .45 lbs approx.