SAVE UP TO 15% OFF WITH COUPON: EXTENDED
  • Shop by Category
  • Hot Deals
  • Looking for Coupons? Call us

MF MD HG Call Save
Nady Logo
Product 630436

Nady PMX-600 Powered Mixer   

  • Write a Review

The Nady PMX-600 Powered Mixer with DSP effects was developed using the expertise of professional sound engineers and working musicians. It has super...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
OVERVIEW

A small powered mixer with a big feature set.

The Nady PMX-600 Powered Mixer with DSP effects was developed using the expertise of professional sound engineers and working musicians. It has superior performance and offers greater flexibility than most other powered mixer in its price range.

FEATURES
  • 6 mono input channels
  • XLR mic and 1/4" TRS line inputs
  • Fan-cooled, bipolar amplifier with 2 x 225W RMS power at 4 ohms
  • 4 master faders
  • L/R main mix and G1-2 group submix buses
  • Group to Main enable switch
  • 32-bit DSP reverb (plate, gate, room, hall, stadium)
  • 2 x 7-band graphic EQ
  • Channel trims and peak LEDs
  • Switchable low-cut filters
  • Channel hi, low, and sweepable mid controls
  • Switchable +48 volt phantom power
  • 2 aux sends and 2 aux returns each with level control
  • Tape/CD In and record out stereo RCA jacks with tape level control
  • 6 balanced 1/4" TRS inserts
  • 2 x 10-segment LED display bargraph meters with power amp peak indicator
  • Balanced 1/4" TRS and XLR stereo main outs
  • Balanced 1/4" group 1 and 2 outputs
  • Dual left and right 1/4" amplifier outputs for easy speaker daisy chaining
  • Internal shielded AC supply with 115V/230V selector switch
SPECIFICATIONS

PMX-600 Powered Mixer

  • INPUT SECTION

    Input Connector Input Impedance Max Level
    MONO CH MIC XLR BALANCED 2.8K_ +13dBu, 3.6V RMS*
    MONO CHANNELLINE 1/4" UNBALANCED 10K_ +17dBu, 5.5V RMS
    1/4" TRS BALANCED 20K_ +23dBu, 11V RMS
    AUX RETURN 1/4" UNBALANCED 10K_ +11dBu, 2.8V RMS
    TAPE IN STEREO RCAJACKS 10K_ +18dBu, 6V RMS
    INSERTINPUT 1/4" UNBALANCED 10K_ +22dBu, 10V RMS
    With Trim, Tape In, and Aux Return Level controls set to Mid (50%)
    *With Trim set to Min (0%)
    Phantom Power on XLR inputs : 48VDC, globally selected

    MIXER SECTION
    Trim: Range 28dB
    Channel High EQ +/-15dB: 12KHz, Rotary control
    Channel Mid EQ +/-15dB: Variable 250Hz - 6KHz, Two Rotary controls
    Channel Low EQ +/-15dB: 80Hz, Rotary control
    Channel Aux 1, Aux 2 Eff, Pan: Rotary controls
    Low Cut, L-R Select, G1-2 Select: Push-button switches
    Channel faders: -_to +10dB, 60mm sliders
    Echo Effect Time Delay: 0 to 200mS
    Dual 7-Band EQ +/-12dB: 63Hz, 250Hz, 630Hz, 1KHz, 2.5KHz, 6.3KHz, 15KHz 20mm sliders
    Master and Group dual faders, Effect single fader : -_to +10dB, 60mm slider

    MASTER OUTPUT SECTION
    Channel Input to Main Output
    Frequency Response: 20Hz25KHz (+/- 3dB)
    THD + Noise: 0.04%
    S/N Ratio: -85dB (gain controls @ unity), -94dB (gain controls down)
    Noise Floor: 350uV (gain controls @ unity), 150uV (gain controls down)
    Output Connector Output Impedance Max Level
    AUX SEND 1 & 2 1/4" UNBALANCED 200_ +21dBu, 9V RMS
    GROUP1 & 2 1/4" UNBALANCED 200_ +18dBu, 6V RMS
    CONTROLROOM L-R 1/4" UNBALANCED 200_ +8dBu, 1.9V RMS
    RECORD OUT STEREO RCAJACKS 1.4K_ +21dBu, 8.5V RMS
    MAIN L-R 1/4" UNBALANCED 200_ +21dBu, 8.5V RMS
    XLR BALANCED 400_ +27dBu, 17V RMS
    HEADPHONE 1/4" STEREO 12_ 2 x 50mW, 1.75V RMS**
    **When connected to 32_output

    POWER OUTPUT SECTION
    8_Both Channels Driven (1% THD): 150W RMS per side
    4_Both Channels Driven (1% THD) : 200W RMS per side
    Channel Input to Speaker Output
    Frequency Response: 25Hz22KHz (+/- 3dB)
    THD: 0.09%
    S/N Ratio: -72dB (gain controls @ unity), -85dB (gain controls down)
    Noise Floor : 9mV (gain controls @ unity), 2mV (gain controls down)
    Amplifier Protection: Fan cooling, short circuit protection, current limiting, Speaker DC protection circuits, clip indicators,
    Power ON/OFF relays for anti-thump circuit

    GENERAL
    Power Requirements: Voltage selectable, 115VAC/60Hz or 230VAC /50Hz
    Fuse Requirements: 5x20mm glass tube F.B. 8A250V @ 115VAC
    4A250V @ 230VAC
    Weight : 24.5 lbs. (11.1 Kg)
    Dimensions (HWD): 6.4" x 16.9" x 17.2" (163 x 430 x 437mm)
Reviews
Loading....
See All Nady Powered Mixers
Ship To: US Flag
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.