- Back to Top
- OverviewJump to Overview
- FeaturesJump to Features
- WarrantyJump to Warranty
- ReviewsJump to Reviews
R84 Bidirectional Big Ribbon Studio Microphone
Condition 1 - Mint
- Write a Review
- #J52651 004000000 J52651004000000
- Free Shipping (48 Contiguous U.S. States)
The R84 was designed to be flexible and practical in a myriad of recording settings. It delivers exceptional headroom while maintaining an intimate p...Click To Read More About This Product
6-Month* financing available.
(Open Box) Versatile ribbon microphone with gentler proximity effect.
The R84 was designed to be flexible and practical in a myriad of recording settings. It delivers exceptional headroom while maintaining an intimate performance quality with smooth highs and extended lows. These aspects, combined with the reduced proximity effect, make the R84 incredibly well suited for both close-up and ambient mic applications. It’s just as versatile as an R44, flattering voice, strings, brass and drums alike.
The AEA R84 uses a 2.35 in. by 0.185 in. by 2-micron pure aluminum low-tension (16.5 Hz) ribbon element, just like the classic R44. Many ribbon mic manufacturers choose shorter ribbons that are easier to install, but AEA’s Large Ribbon GeometryTM design offers important advantages. Ribbon microphones operate linearly above their resonant frequency, unlike condenser or moving coil transducers, so the resonant frequency of a good microphone design should be as low as possible. The longer the ribbon, the lower the resonant frequency will be. The ribbon has to move twice as far for every drop in octave as it vibrates within the magnetic gap, thus, a longer ribbon will allow for further movement back and forth. This results in the ribbon handling louder sound sources and more sound pressure level.
In 1976, when General Electric bought RCA and closed down its microphone division AEA began servicing RCA’s legendary ribbon mics. Twenty-two years later, AEA reissued the iconic 44 ribbon mic and has continued to make ribbon microphones in the RCA tradition to this day. From the R84 Workshorse, R92 Up-Close Passive, Stereo R88, and Supercardioid KU4 – there is a AEA Legacy microphone for every application and setting.
Same Big RibbonTM, tuning, and transformer as the R44 series.
Classic look, but with milder proximity effect than the R44
Intimate performance quality with smooth highs and extended lows
Easy to use and more affordable
Versatile for close-up and ambient mic applications
100% handcrafted in Pasadena, CA
An astonishing technical achievement, and a welcome contributor to any studio.
Frequency Range: <20 Hz to >20 kHz
Maximum SPL: 165 + dB SPL (1% third harmonic > 1 kHz)
Sensitivity: 2.5 mV/Pa (-52 dBv/Pa) into unloaded circuit
Output Impedance: 270 Ω nominal
Recommended Load Impedance: 1.2K Ω or greater
Phantom Power: Not required or recommended
Polarity: Pin 2 high for positive pressure on front of microphone.
Polar Response: Native bidirectional, figure-of-8 pattern
Horizontal: Up to 90 dB rejection at right angles to the front/back axis.
Vertical: Level changes with angle of incidence, frequency response is consistent.
Transducer Element Material: Pure aluminum corrugated ribbon
Thickness: 1.8 μm
Width: 0.185 in
Length: 2.35 in
Microphone Dimensions Height: 11.6 in
Width: 3.9 in
Depth: 2.5 in
Weight with cable: 3 lb
Musician's Friend Gold Coverage
Gold Coverage Includes:
- Unexpected and unintentional spills, drops and cracks
- Normal wear and tear
- Power surges
- Dust, internal heat and humidity
Other plan features include:
- Shipping fees covered if required for repair or replacement
- Plans are transferable in the event merchandise is sold
- Plans are renewable on new gear