Save up to 15% off with code: STRETCH Shop Now
Looking for Coupons?Call us 800-449-9128 Hablamos Español  
MF MD HG Call & Save
Ortofon Logo
Product 801227

Ortofon Q.Bert OM Turntable Cartridge with Extra Stylus   

  • Write a Review

Designed together with DJ QBert for scratch and back-cueing, the OM turntable needle has a very good ability to find the groove and stay there. It us...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
OVERVIEW

QBert-approved turntable cartridge.

Designed together with DJ QBert for scratch and back-cueing, the OM turntable needle has a very good ability to find the groove and stay there. It uses a spherical diamond and enables a very high output (10—11 mV). The turntable cartridge comes with an extra Q.Bert stylus.

Several Ortofon technologies make it possible to get high sound quality and low record wear at the high tracking forces that are necessary in club environments. Artists all over the world claim very high demands to their professional DJ equipment, among which the Ortofon cartridges play a decisive part by realizing that scratching, back-cueing, and live artistic performance are a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in environments with extreme sound pressure and vibration.

Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon cartridges are equipped with cantilevers made from aluminum tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage these replacement cartridges nor degrade their stability.

For easier cueing, the nose of all the Ortofon cartridges have an extra large cutout which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent.


Get the replacement cartridge designed with international turntable champion DJ Q.Bert. Order today.

SPECIFICATIONS

Q.Bert OM Turntable Cartridge with Extra Stylus

  • Output voltage at 1000 Hz.
  • 5cm/sec.: 11 mV
  • Channel balance at 1 kHz: 1.5 dB
  • Channel separation at 1 kHz: 22 dB
  • Channel separation at 15 kHz: --
  • Frequency range: 20-20.000 Hz
  • Frequency response: 20-20.000 Hz -3 dB
  • FIM distortion at recommended tracking force, DIN 45.542: < 1%
  • Tracking ability at 315Hz at recommended tracking force: 90 micrometers
  • Compliance, dynamic, lateral: 12 micrometers/mN
  • Stylus type: Spherical
  • Stylus tip radius: R 18 micrometer
  • Equivalent stylus tip mass: 0.6 mg
  • Tracking force range: 2.0-4.0 g (20-40 mN)
  • Tracking force, recommended: 3.0 g (30 mN)
  • Tracking angle: 20 degrees
  • Internal impedance, DC resistance: 1680 Ohm
  • Internal inductance: 920 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-400 pF
  • Cartridge colour, body/stylus: Black/White
  • Cartridge weight: 5 g
  • Replacement stylus unit: Q.Bert
  • Q.Bert stylus specifications:
  • Frequency range: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz -3 dB
  • FIM distortion at recommended tracking force, DIN 45.542: < 1%
  • Tracking ability at 315Hz at recommended tracking force: 90 micrometers
  • Compliance, dynamic, lateral: 12 micrometers/mN
  • Stylus type: Spherical
  • Stylus tip radius: R 18 micrometers
  • Equivalent stylus tip mass: 0.6 mg
  • Tracking force range: 2.0-4.0 g (20-40 mN)
  • Tracking force, recommended: 3.0 g (30 mN)
  • Tracking angle: 20 degrees
  • Stylus colour: White
Reviews
Loading....
See All Ortofon Needles & Cartridges
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.