Looking for Coupons?Call us 800-449-9128 Hablamos Español  
MF MD HG01 Guitars, Amp & Effects Sale - Up to 20% Off Select Gear 08-07-17
Peavey Logo
Peavey PV 215D Dual 15" Powered Speaker  (Open Box)
Ships Internationally
  • Write a Review
Product# H78458
OVERVIEW

Class-D powered three-way sound reinforcement speaker system.

The Peavey PV 215D is a powered, quasi-three-way, sound reinforcement speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. The PV 215D is capable of generating peak SPL up to 127 dB. The lightweight yet rugged carpet covered enclosure facilitates portable use for live music or PA sound. The trapezoidal cabinet has steel handles on either side for ease of portability, and four rubber feet for floor use. Black steel corners provide road protection to the cabinet. A black full-length powder-coated perforated steel grille provides driver protection and a professional appearance.

The PV 215D speaker system includes an internal power amp to drive its own speakers. It supplies up to 800 watts peak available power to the internal speakers. The amplifier is equipped with DDT compression, providing protection from excessive amplifier clipping and the consequent distortion. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4" TRS phone jack. A Contour switch provides some bass and treble lift when used as a background music source, etc. A Link Out 1/4" phone jack provides a pre-level send for linking multiple units together.

FEATURES
Quasi-three-way powered sound reinforcement enclosure
Peavey exclusive dual 15" heavy-duty woofers with 2 3/8" voice coil & 50 oz. magnet
RX14 titanium diaphragm compression driver, with 1.4" titanium diaphragm
Constant directivity tweeter horn, 60 X 40
Class-D powered system with up to 800 W total peak available power
DDT compression/anti-clipping protection
Signal input via combo female XLR/1/4" phone jack, providing balanced operation
Contour switch provides bass and treble lift
Heavy-duty crossover network with high frequency driver protection
Carpet covered trapezoidal enclosure
Steel handles and protective corners
Full-coverage heavy-duty perforated steel grill with powder coat finish
T-Nut speaker mounting

A loudspeaker with unparalleled performance and value.

SPECIFICATIONS
Enclosure: Peavey PV 215D
Frequency Range 1 meter on-axis, swept-sine in 1/2 Space environment: -10 dB: 40 Hz to 21 kHz
Frequency Response 1 meter on-axis, swept-sine in 1/2 Space environment: 58 Hz to 17 kHz (±3 dB )
Sensitivity: (1w/1m) 98 dB
Maximum Peak SPL: 127 dB
Transducer Compliment: Dual heavy-duty Pro 15" woofers with 2
3/8" voice coil & 50 oz. magnets, and an RX 14 1.4" titanium diaphragm dynamic compression driver on a Constant Directivity 60 X 40 horn.
Nominal Coverage Pattern: 60 degrees horizontal by 40 degrees
vertical
Electro-acoustic Crossover Frequency: 2.6 kHz
Input Connections: One combo female XLR/ 1/4" phone jack providing balanced or unbalanced operation.
Enclosure Materials & Finish: Trapezoidal, black carpet covered
12mm MDF, black powder-coated full length perforated steel grille.
Mounting or Suspension: Four rubber feet for floor use.
NOTE: This unit is not designed for overhead suspension!
Dimensions (H x W x D):
Front: 48.50 in. x 18.88 in. x 14.75 in.; 1232 mm x 480 mm x 375 mm
Rear: 48.50 in. x 11.25 in. x 14.75in.; 1232 mm x 286 mm x 375 mm
Weight: 79 Lbs. (35.9 kg)

ELECTRONICS AND AMPLIFIER SPECIFICATIONS:
Power Amp Rating, Total Power Output: 800 watts peak available
power, Continuous Power: 400 watts into 4 ohms @ less than 1%
distortion
Electronic Input Impedance (Nominal): 2.7 k ohms balanced (XLR or
1/4"), 1.35 k ohms unbalanced 1/4".
Infrasonic filter protection: 24 dB/octave roll-off
Nominal Amplifier Frequency Response: +0, -3 dB from 20 Hz to 20 kHz
Hum and Noise: Greater than 90 dB below rated power
DDT Dynamic Range: Greater than 14 dB
THD and IM: Typically less than 0.5 %
Damping Factor: Greater than 200 @ 1000 Hz, 4 Ohms
Power requirements of Peavey PV2015D System: Nominal 370
Watts, Voltage and Frequency Ranges: 100-120 VAC, and 220 -
240VAC, at 50- 60 Hz
Fuse Type:
For 100-120 VAC USE: International fuse classification T6.3AL . In
the USA, types GDC, GMC, 215, 218, and 477 cartridge-style 5 x 20 mm size fuses with a 6.3 amp 250V rating can be used.
For 220-240 VAC USE: International fuse classification T3.15AL .
This is a cartridge style 5 x 20 mm size time-delay fuse with a 3.15
amp 250V rating.
Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.