Looking for Coupons?Call us 800-449-9128 Hablamos Español
Accessories Sale -Final Day - 15% off qualifying orders $25 or more
Phonic Logo
Product 482415

Phonic DMX1501 1500 Watt Power Amplifier

  • Write a Review

The affordable Phonic DMX 1501 power amplifier provides users with 750 Watts of power per channel at 2 ohms, enabling it to be used for a multitude o...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Customers Also Viewed:
OVERVIEW

A heavily powered amplifier that's extremely affordable

The affordable Phonic DMX 1501 power amplifier provides users with 750 Watts of power per channel at 2 ohms, enabling it to be used for a multitude of tasks, both indoors and out. The flexible inputs, 1/4" and XLR jacks, allow the amplifier to handle signals from most any mixer, and Speakon and Binding Post outputs provide speakers with crystal clear audio. Also featured are stereo, parallel and bridge-mono operating modes, as well as low-cut filters to take care of low-frequency rumble.

FEATURES
  • Output power: 1200W @ 2 stereo
  • High current power supply for increased reliability and performance
  • Effectively runs in Stereo, Parallel and Bridge Mono modes
  • Balanced 1/4" TRS and XLR inputs for maximum flexibility
  • Front mounted gain controls for easy access
  • Selectable High-Pass filter at 30Hz or 50Hz
  • Performance Indicators: Signal and Peak
  • Short circuit, thermal, subsonic, RF protection, output DC offset
  • Power on/off muting
SPECIFICATIONS
  • Power/Channel, Both channel driven
  • 8 ohms, 20 Hz-20 kHz, 0.1% THD: 260W
  • 4 ohms, 20 Hz-20 kHz, 0.1% THD: 400W
  • 8 ohms, 1 kHz (EIA), 0.1% THD: 290W
  • 4 ohms, 1 kHz (EIA), 0.1% THD: 470W
  • 2 ohms, 1 kHz (EIA), 0.1% THD: 720W
  • Power/Bridge Mono
  • 8 ohms, 20 Hz-20 kHz, 0.1% THD: 810W
  • 8 ohms, 1 kHz (EIA), 0.1% THD: 940W
  • 4 ohms, 1 kHz (EIA), 0.1% THD: 1430W
  • Performance
  • Frequency Response: 20 Hz ” 20 kHz (+0/-1dB) 5 Hz ” 60 kHz, (-3dB drop point)
  • Damping Factor: > 300 @ 8 ohms
  • Total Harmonic Distortion: < 0.01 %
    Input Sensitivity @ 8 Ohm: 1.23Vrms / 4.0dBu
  • Gain: 31 dB
  • Signal/Noise: 100 dB, 20 Hz ” 20 kHz.
  • Low Frequency Filter: 30 or 50Hz, selectable
  • Controls & Indicators
  • Front Panel: Power Switch, Gain Controls
  • Rear Panel: Mode (Stereo, Parallel, Bridge, LF filter, Limiter), via 10-position DIPswitch
Reviews
Loading....

Review Snapshot

by PowerReviews
 
4.5

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

(1 of 1 customers found this review helpful)

 
4.0

Not a bad amp for the money

By Wild Man

from Lafayette, IN

See all my reviews

I bought this and run it bridged for our stage monitors in a daisy chain fashion. It packs the power it claims. The sound is good. The cooling fan is silent. The front power level knobs are cheap platic. The connections in the back are solid. It does have a bank of switches that have to be set correctly to use as L/R out or Bridged out modes. I have no complaints about the amp other that its cheap appearance...but that goes along with its cheap price.

 
5.0

Same as Behringer 1500 amp

By Wal;

from NYC Ny

Just bought this amp. Looks like a Behringer EP1500 amp. All the knobs, inputs, DIP switches, outputs,fan, even the screws on the case are in the same place as the Behringer. Looks like they came from the same factory and just have different nameplates!I guess this makes the Pkonic amp a bargain, if you rate Behringer as a good product.So far this amp works OK. However I have not really cranked it up for an extended period of time. Anyway looks like a good deal.Wal

Displaying reviews 1-2

Back to top

See All Phonic Live Power Amplifiers
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.