Phonic MAX 1000 Power Amplifier (Used)
- Write a Review
- SKU
- #501104000000000
Up to 600W at 8 ohms (bridge mono) or 300W at 4 ohms power with multiple operating modes.
The Phonic MAX 1000 Power Amplifier delivers 600 Watts of power at 8 ohms (bridge mono), 300W of power at 4 ohms (stereo)—ideal for small- to medium-size venues like churches, auditoriums, and more. Input to the MAX 1000 is achieved via XLR or phone jack, and output is achieved through either Speakon-type connectors or binding posts. The MAX 1000 features ground switches, and the option to choose between stereo, parallel and bridge operating modes, making it an affordable amplifier that is exceptional for real-world application.
Features
- High-current toroidal transformers for greater power and low noise
- Balanced 1/4" TRS and XLR inputs for maximum flexibility
- Grounding / Floating switch to avoid grounding loop
- Binding post and Speakon-type outputs
- Front mounted gain controls for easy access
- Signal and Peak LED indicators to monitor performance
- Short circuit, thermal, subsonic, RF protection, output DC offset
You'll want the MAX 1000 powering your next gig—add it to the cart now.
MAX 1000 Power Amplifier Specifications:
- Stereo Mode:
- 200W @ 8 ohms EIA, 1kHz
- 300W @ 4 ohms EIA, 1kHz
- Bridge Mono Mode:
- 600W @ 8 ohms EIA, 1kHz
- Total Harmonic Distortion: 0.1%
- Output circuitry: Class H
- Input Sensitivity @ 8 ohms: 1.23V (+4dBu)
- Distortion (SMPTE-IM): <0.01%
- Noise (unweighted 20Hz - 20 kHz below rated output): 100dB
- Damping Factor: >300 @ 8 ohms
- Frequency Response: 20 Hz-20kHz, +0/-1dB points: 5Hz-50kHz
- Input Impedance: 20 kOhm balanced, 10kOhm unbalanced
- Cooling: Continuous variable-speed fan, front-to-rear air flow
- Input: XLR and 1/4" TRS
- Output: Speakon and binding posts
- LED Indicators: Blue Power, Green Signal, Red Peak
- Controls:
- Front Panel: CH1 and CH2 GAIN knobs with 41 detents
- Rear Panel: Parallel, Bridge, and Stereo Operation Mode side switches, floating on/off switch, and Current-Break reset button
- Protection Circuitry: Short circuit, thermal, subsonic, RF, output DC offset, power on/off muting
- Power Consumption: 600W
- Power Requirement (depends on region): 100~120VAC, 220~240VAC, 50/60Hz
- Dimensions: 19" W x 3.46" H x 15.9" D
- Weight: 33lb.
-
RMX 1450 Power Amp -
Crown Xti Series Power Amps at Winter NAMM 2007 -
Cerwin-Vega Power Amps at Winter NAMM 2007
Review Snapshot®
by PowerReviews(based on 4 reviews)
Ratings Distribution
Reviews
Reviewed by 4 customers
Sort by
Displaying reviews 1-4
Comments about Phonic MAX 1000 Power Amplifier:
When I First got this amp I was pleased with it. Good sound and didnt over heat at all. But then one night Im doing a Show with my 24 CH. Mackie And Community Loudspeakers. And out of no where it just Stops. No LED Lights work and nothing But a Static Signal. Had to get it fixed in north jersey cause phonic refused to take it. My final words, GET A CROWN! makes everything simpler.
Comments about Phonic MAX 1000 Power Amplifier:
the specs listed on the website did not match the product i received. the max 1000 i got had NO 1/4" inputs. after several phone calls a of arguing with phonic and a couple weeks of waiting i learned that i received an out of date unit. NOT IMPRESSED also the matching 10 " monitor speakers.. the first time i put them onstage one of them quit halfway through the third set. had to finish the night with no vocals on stage. i will never buy another phonic product, PERIOD.
Comments about Phonic MAX 1000 Power Amplifier:
This is a great monitor amp. I'm using mine to power the mids on a three way system, but I plan on going with two way full range PA cabs, moving this amp to the monitor rack, and buying two more to power my entire stage monitor system (6 seperate monitor mixes)
Comments about Phonic MAX 1000 Power Amplifier:
The amp was arrived to my house in 3 days. It's built like a tank with steel casing and provides plenty of power for my 2 x 8 ohm 300W rating PA speakers. My son, weighs at 36lb, stood on it while I turned my back on him, and the cover didn't even depress. It pumps out clean sound upto 96% of volume level. I didn't turn the volume always to 100% because it's too loud for my 16'x20' room. For 200W/channel, it's a good deal.
Displaying reviews 1-4
