- J00733 000000000 J00733000000000
PreSonus Temblor T10 10 in. Active Studio Subwoofer
- Write a Review
The Temblor T10 Active 10 in. Studio Subwoofer is designed for low frequency sound reinforcement while monitoring in a recording studio. The subwoofe...Click To Read More About This Product
6-Month* financing available.
Great add-on to an existing monitoring system.
The Temblor T10 Active 10 in. Studio Subwoofer is designed for low frequency sound reinforcement while monitoring in a recording studio. The subwoofer utilizes a 10 in. composite low frequency driver with a frequency response of 20 to 200 Hz and a maximum SPL of 110 dB. The driver is housed within a heavily braced and reinforced MDF cabinet with a vinyl finish and ported bass reflex design. It is powered by a 250-watt Class AB plate amplifier. To reduce vibration, the unit features internal dampening and rests on built-in feet. The subwoofer features a variable crossover frequency between 50 and 130 Hz, input gain controls from -30 dB to +6 dB, a 0 or 180 phase switch, and a ground lift switch.
You can connect to the subwoofer via a pair of balanced XLR inputs, a balanced pair of 1/4" TRS inputs, or an unbalanced pair of RCA inputs. The subwoofer also includes a balanced pair of XLR pass-through outputs, a balanced pair of 1/4" TRS pass-through outputs, and a balanced XLR sub output. The unit features a 120/240 VAC switchable power supply to accompany studio monitors in different regions.
- 10" Composite Low Frequency Driver
- 110 dB Continuous Maximum SPL
- 250 Watts of Class AB Amplification
- Variable 50 to 130 Hz Low Pass Filter
- 1/4" TRS Bypass Footswitch Jack
- Continuously Variable Input Gain
- Phase Switch
- Pass-Through For Additional Connections
- Reinforced MDF Cabinet with Bracing
Put some boom in your room. Order today.
Temblor T10 10 in. Active Studio Subwoofer
- Transducer 10" Composite
Power 250 W
Amplifier Type: Class AB
Maximum SPL: 110 dB continuous
Controls Input gain: continuously variable from -30 to +6 dB
Low pass filter: continuously variable from 50 to 130 Hz
Phase switch: 0 and 180
Ground lift switch
Inputs: Left and right balanced XLR
Left and right balanced 1/4" TRS
Left and right unbalanced RCA
Outputs: Left and right balanced XLR pass-through
Left and right balanced 1/4" TRS pass-through
Balanced XLR Sub out
1/4" Sub bypass
Design: Front firing bass-reflex acoustic port
Internal dampening and heat sink
Construction: Resonance-suppressing internal bracing
Internal dampening and heat sink
Frequency Response: 20 to 200 Hz
Crossover Frequency: Variable 50 to 130 Hz
Voltage: 100 to 120 VAC at 50/60 Hz
220 to 240 VAC at 50-60 Hz
Dimensions: (W x H x D) 13.19 x 16.14 x 16"
Weight: 31.7 lb
Musician's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
- Unexpected and unintentional spills, drops and cracks
- Normal wear and tear
- Power surges
- Dust, internal heat and humidity
Other plan features include:
- For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
- For products under $200 experiencing the above failures, a Musician's Friend gift card will be issued for the full price of the product + tax.
- Shipping fees covered if required for repair or replacement
- Plans are transferable in the event merchandise is sold
- Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.
Reviewed by 1 customer
Displaying review 1
- Easy To Set Up
- Good Power Output
- Great Sound Quality
Comments about PreSonus Temblor T10 10 in. Active Studio Subwoofer:
Paired this sub with the E5's but would probably go better with the E8's or better. Set-up was straight forward, very easy to understand.
I say it would go better with the E8's because after calibration (which should be done to all systems) I have the E5's cranked up pretty good and the sub just cracked but they do sound very good together. This added a world of difference to mixing.
This sub has more than enough power for just about any situation. It will do anything you ask of it.
- Was this a gift?: