- J01724 000000000 J01724000000000
QSC RMX4050a Power Amplifier
- Write a Review
The RMXa Series amplifiers from QSC offer true professional-quality performance at an affordable price. The 3-rackspace RMX4050a provides 2000 watts ...Click To Read More About This Product
6-Month* financing available.
Big power in a small size.
The RMXa Series amplifiers from QSC offer true professional-quality performance at an affordable price. The 3-rackspace RMX4050a provides 2000 watts per channel at 2 ohms. It features a compact chassis less than 16" deep. RMXa amplifiers include a comprehensive set of features including XLR and 1/4" balanced inputs, Speakon and binding post outposts for convenient connectivity. User-defeatable clip limiters and selectable low-frequency filters optimize sonic performance.
The RMX 4050a is a "heavy duty" model designed to work as hard into 2 ohm loads as most competing amplifiers will at 4 ohms. It features a three-tier, Class H design that is extremely efficient at real world power levels. Less AC current is wasted and more available current goes into producing useful audio power. 120 volt versions of the RMX4050a accomplish all this with a standard 15 amp plug.
- Compact size
- High-current toroidal transformers
- Independent user-defeatable clip limiters
- Selectable low-frequency
- Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs
- Touch-proof binding post and Neutrik Speakon outputs
- Independent DC and thermal overload protection
Outrageous power, borderline indestructible and great-sounding. Order today.
RMX4050a Power Amplifier
- Stereo Mode (both channels driven):
8Î/ FTC 20 Hz - 20 kHz / 0.1% THD: 800W
8Î/ EIA 1 kHz / 0.1% THD: 850W
4Î/ FTC 20 Hz - 20 kHz / 0.1% THD: 1300W
4Î/ EIA 1 kHz / 0.1% THD: 1400W
2Î/ FTC 20 Hz - 20 kHz / 1% THD: 1600W
2Î/ EIA 1 kHz / 1% THD: 2000W
8Î/ FTC 20 Hz - 20 kHz / 0.1% THD: 2600W
8Î/ EIA 1 kHz / 0.1% THD: 2800W
4Î/ EIA 1 kHz / 1% THD: 4000W
Signal to Noise (20 - 20 kHz) 8Î: > -100 dB
Distortion (SMPTE-IM): <0.02%
Input Sensitivity at 8Î: 1.42V (+5.3 dBu)
Voltage Gain: 64X (36dB)
Output Circuitry: 3-tier Class H
Power Requirements: 10A
Typical, 1/8 power pink noise at 4Î*: 20.1A
Supplied Plug Type, 100/120V: NEMA 5-15
Supplied Plug Type, 230V: CEE7/7
Frequency Response : 20 Hz - 20 kHz: +0/-1 dB -3 dB points: 5 Hz and 50 kHz (LF filter bypassed / 8Î)Damping Factor (1 kHz and below)
Input Impedance: 10K ohms unbalanced, 20K ohms balanced
Input Clipping: 6.4 Vrms (+18 dBu)
Cooling: Continuously variable speed fan, back-to-front air flow
Connectors (each channel): Input: Active balanced / 3-pin Euro-style detachable terminal block and XLR (pin 2+)
Controls: Front: AC switch / Ch. 1 & 2 gain knobs
Rear: 10-position DIP switch
Indicators: Power-on: Green LED / Signal: Yellow LED (1 per channel) / Clip: Red LED (1 per channel) | Protect: Red LED
Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, RF protection. Stable into reactive or mismatched loads
Load Protection: Turn-on/off muting / AC coupling (850, 1450) / Triac crowbar (1850HD, 2450, 4050HD, 5050) on each channel
Dimensions: 5.25" tall / 3 rack spaces
Power Requirements: 100, 120, 230 VAC, 50 - 60 Hz (factory configured)
Musician's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
- Unexpected and unintentional spills, drops and cracks
- Normal wear and tear
- Power surges
- Dust, internal heat and humidity
Other plan features include:
- For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
- For products under $200 experiencing the above failures, a Musician's Friend gift card will be issued for the full price of the product + tax.
- Shipping fees covered if required for repair or replacement
- Plans are transferable in the event merchandise is sold
- Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.