- #270919 000000000 270919000000000
Shure MX392/S Microflex Boundary Microphone
- Write a Review
This Shure Microflex MX392 is a small, low-profile surface-mounted electret condenser boundary microphone designed for mounting on conference tables,...Click To Read More About This Product
6-Month* financing available.
Equally at home in the boardroom or the studio.
This Shure Microflex MX392 is a small, low-profile surface-mounted electret condenser boundary microphone designed for mounting on conference tables, stage floors, and lecterns. The MX392/S supercardioid mic features high sensitivity and a wide frequency range make them especially suitable for picking up speech and vocals in sound reinforcement and recording applications. The MX392/S has an supercardioid pickup pattern and is recommended for sound reinforcement applications requiring narrow or more distant coverage.
Microflex Boundary microphones are the high-quality solution for a range of applications, such as altars, boardrooms and distance learning centers. Every Microflex plate microphone features a choice of interchangeable condenser cartridges. Microflex cartridges give you superior Shure quality sound for every application.
In addition, the mic's programmable switches offer the flexibility to be set for Push to Talk, Push to Mute or Push On/Push Off modes. Attractively designed with a low profile, professional appearance, the Microflex Boundary microphones come with an easy to use paint mask for your custom-color installations. The Shure MX392/S surface-mount microphone includes a programmable membrane on/off switch, logic input/output terminals, an on/off indicator LED, screw terminal connections, and an attached 12 ft. (3.7 m) unterminated cable.
Flat frequency response across the vocal range for uncolored sound
Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
Sleek, low-profile design for unobtrusive appearance
Balanced, transformerless output for increased immunity to noise over long cable runs
Programmable on/off switch and LED on/off indicator
Logic input/output terminals for remote control or use with automatic mixers
Advanced RF filtering
A very useful mic that can solve difficult recording problems. Order today.
Polar Pattern: Supercardioid
Pickup angle (-3 dB): 115 degrees
Output Impedance: EIA Rated at 150 ohms (180 ohms actual)
Sensitivity (1 kHz ref. 1 V per Pascal ): -26.5 dBV/Pa (47.3 mV)
Maximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion, 1 kOhm load): 116 dB
Signal to Noise Ratio (referenced at 94 dB SPL): 72.0 dB
Equivalent Output Noise (A-weighted): 22.0 dB SPL
Dynamic Range at 1 kOhm Load: 94 dB
Common Mode Rejection: 50 dB minimum
Preamplifier Output Clipping Level: -6 dBV (0.5 V)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin
2 relative to pin output connector.
Logic Connections: LED IN: Active low (<1.0v), TTL compatible. Absolute maximum voltage: -0.7V to 50V.; SWITCH OUT: Active low (<0.5V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 24V (up to 50V through 3 k ohms).
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA current consumption
3 of the preamplifier XLR output connector.
Environmental Requirements: Operating Temperature Range: ”18 degrees C to 57 degrees C (0 degree F to 135 degrees F); Relative Humidity: 0 to 95%
Dimensions: (L x W x H): 3.1" x 2.08" x .750", (7.940 x 5.304 x 1.905 cm)
Furnished Accessories: Zippered bag, In-line Preamp, #4 hex wrench
All measurements taken with microphone mounted on a wooden surface 30 in. x 30 in. (76.2 cm x 76.2 cm)
Musician's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
- Unexpected and unintentional spills, drops and cracks
- Normal wear and tear
- Power surges
- Dust, internal heat and humidity
Other plan features include:
- For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
- For products under $200 experiencing the above failures, a Musician's Friend gift card will be issued for the full price of the product + tax.
- Shipping fees covered if required for repair or replacement
- Plans are transferable in the event merchandise is sold
- Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions (Opens in new window) for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.