- Product 270915
Shure MX692/C Microflex Wireless Cardioid Boundary Microphone
- Write a Review
The frequency-agile Shure MX692 Wireless Boundary Microphone features over a hundred selectable channels, and a customizable touch-sensitive logic sw...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
Wireless for total freedom of placement.
The frequency-agile Shure MX692 Wireless Boundary Microphone features over a hundred selectable channels, and a customizable touch-sensitive logic switch. The clean sound and low profile of Shure's Microflex plate mic combines with the flexibility of the UC1 wireless transmitter for freedom of placement, easy setup and storage, and logic control (requires UC4 wireless receiver). It can also be used with the UP4 Portable UHF Wireless Receiver and the U4D or U4S UHF Wireless Receivers.
With no holes to drill, the cable-free MX692/C boundary mic is the perfect solution for conference and meeting spaces where users need complete freedom of placement and a clean, low-profile appearance with the flexibility of wireless. The MX692 microphone will also seamlessly integrate into modern installations providing modern audio/video operators with a sophisticated way to address challenging applications.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
Integrated functionality of Microflex boundary microphone and UC Series wireless transmitter
Frequency agile transmitter offers over 100 user selectable channels for UA and UB frequency bands; run up to 32 systems simultaneously
User programmable touch-sensitive switch and status LED
9V battery-powered with 3-stage battery life LED indicator
Thread mount cartridge connection for easy field replacement
Requires Shure UC4 receiver (sold separately)
Low-profile and high quality, perfect for the boardroom. Order today
Polar Pattern: Cardioid
Frequency Response: 50”17000 Hz
Current drain: 62 ±10 mA, typical (Vss = 6.0 to 9.6 VDC)
Battery life: 7 hours (based on alkaline battery)
Dynamic Range: > 100 dB minimum, A-weighted
Gain Adjustment Range: -6 to 34 dBs
Modulation: ±45 kHz deviation
Polarity: Positive pressure on the diaphragm produces a positive voltage on pin 2 of the XLR output of the UC4 receiver.
Transducer type: Electret condenser
Power Requirements: 9V alkaline battery
Temperature Range: Operating: (20 degrees to 120 degrees F); Storage: (20 degrees to 165 degrees F)
RF Carrier Frequency Range: 692-716 MHz (UB), 782-806 MHz (UA)
Working Ranges: 250 ft. (75 m) typical, 800 ft. (250 m) line-of-sight
Note: actual working range depends on RF signal absorption, reflection, and interference
Minimum Distance Between Transmitters: 1 ft. (.3 m)
RF Power Output: 50 mW Max (conducted), 30 mW Typical (radiated)