- Product 270884
Shure UR24S/BETA87A Handheld Wireless Microphone System
- Write a Review
The Shure UR24S/BETA87A Wireless System features the UR4S Single Channel Diversity Receiver and the UR2/BETA87A Handheld Transmitter which consists o...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
The Shure UR24S/BETA87A Wireless System features the UR4S Single Channel Diversity Receiver and the UR2/BETA87A Handheld Transmitter which consists of the UR2 Wireless Handheld Transmitter fitted with the Beta 87A Supercardioid Microphone capsule. The UHF-R is a professional, wireless technology engineered for the most demanding touring environments and installations. UHF-R wireless microphone systems offer unprecedented flexibility and versatility. Using multiple frequency bands, over 108 compatible systems can be used simultaneously. Individual frequency bands deliver up to 60 compatible systems per band. The UHF-R includes infrared synchronization that allows you to configure transmitter settings from the receiver, as well as these outstanding features:
Frequency Band Selection
Shure offers wireless systems in a selection of bands that conform to the different government regulations of specific nations or geographic regions. These regulations help limit radio frequency (RF) interference among different wireless devices and prevent interference with local public communications channels, such as television and emergency broadcasts. The microphone system's band and frequency range are identified on the face of the receiver and transmitter.
Groups and Channels
To transmit audio through a wireless system, the transmitter and receiver must be set to the same radio frequency, or channel. A wide selection of channels allows more microphones to be used at the same time, since each microphone must operate on a different channel. It also provides a greater choice of open channels--those that are free from interference from television broadcasts, electronic devices, or other wireless systems. A group is a selection of compatible channels. Wireless Shure microphones work better together when set to channels in the same group.
Automatic Frequency Selection
The following features scan the RF environment to find the best group and channel settings for a particular installation.
¢Group Scan--finds the group with the most open channels, then sets all networked receivers to channels in that group
¢Channel Scan--finds the first open channel in the currently selected group and sets the receiver to that channel
Automatic Transmitter Sync
This feature automatically transfers the group and channel settings from a receiver to a transmitter. You can also program other transmitter settings on a receiver and transfer those settings too.
This feature locks the receiver and transmitters so that users cannot change settings. The transmitter power switch can also be disabled so that the transmitter remains on if the power switch is accidentally toggled during a performance.
Audio Gain Structure
The following settings allow you to adjust audio gain throughout the system:
¢ Sensitivity (bodypack only). A 25 dB range of gain adjustment at the bodypack transmitter input
¢Transmitter Gain. A 30dB range of audio gain adjustment within the transmitter (affects audio level at the receiver, as indicated by
the Audio LEDS.)
¢Output Level. 32 dB of attenuation at the receiver output, plus a mute setting
¢”30 dB pad for matching audio levels at the receiver XLR output
Each receiver has an RJ-45 port on the back for connecting to other receivers over an Ethernet network. Networking receivers allows you to automatically set channels for all the receivers with a single group scan command. You can also control and monitor all networked receivers through the Shure Wireless Workbench PC software.
Shure Wireless Workbench Software
The Shure Wireless Workbench software on the supplied CD includes a variety of useful tools for installing and managing multiple wireless systems. Simply install the software on your computer and connect it to a network of receivers to monitor and control receivers and transmitters throughout the network.
UR4S Single Channel Diversity Receiver
The UR4S Single Channel Diversity Receiver has the latest in wireless technologies including Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology. The UR4S receiver provides advanced control and robust flexibility for a wide range of professional uses.
UR2 Handheld Transmitter
The UR2 handheld transmitter has a rugged, lightweight construction and an antenna design which advances RF (radio frequency) transmission reliability. The transmitter design allows for interchangeable microphone cartridges.
Beta 87A Vocal Microphone
The Shure Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.
The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the "boomy" sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- 2400 Selectable Frequencies Across 60 MHz Bandwidth
- Track Tuning Filtering Technology
- Up to 60 Preset Compatible Systems/Band (140 w/Multiple Bands, Region Dependent)
- Networked Automatic Frequency Selection
- Automatic Transmitter Setup (including Custom Group Upload)
- Flash Memory to Store Six 60-channel Custom Frequency Groups
- Shure's Patented Audio Reference Companding
- Multi-function Bit-mapped Backlit LCD
- Built-in USB & Ethernet Network Compatibility
- Shure's Wireless Workbench Control/Monitoring Software
- Remoteable Antennas
- Shure's Microprocessor-controlled Diversity
- Switchable RF power
- Frequency and power lockout
- Bit-mapped backlit LCD
- 2 AA batteries -- up to 8 hours continuous use
- Intrared automatic transmitter sync
- All metal die-cast construction
- Smooth frequency response with gradual presence rise
- Highly consistent supercardioid polar pattern provides superior gain-before-feedback
- Electronic low-frequency roll-off compensates for proximity effect
- Wide dynamic range (117 dB) and low distortion characteristics
- Very low susceptibility to RFI and electromagnetic hum
- Advanced cartridge shock-mount system absorbs mechanical shocks and reduces handling noise
- Built-in pop filter reduces undesirable wind and breath sounds
- Legendary Shure quality and reliability
Order today and experience the best in wireless.
- RF Carrier Frequency Range: 518-865 MHz, depending on region
- Working Range : UR1, UR2: 150 m (500 ft.), under typical conditions
- 500 m (1600 ft) line-of-sight, outdoors for a single system
- NOTE: Actual working range depends on RF signal absorption, reflection and
- Audio Frequency Response : 40 ” 18,000 Hz, (+1 dB, ”3 dB). NOTE: Overall system frequency response depends on the microphone element
- Gain Adjustment Range: UR1: ”20 to +35 dB; UR2: ”10 to +20 dB
- Modulation: FM (45 kHz max. deviation), compander system with pre- and
- Dynamic Range: >105 dB, A-weighted
- Image Rejection: >110 dB typical
- RF Sensitivity : ”110 dBm Typical 12 dB SINAD; 105 dBm Typical 30 dB SINAD
- Ultimate Quieting (ref. 45 kHz deviation): >100 dB, A-weighted
- Signal Polarity: Positive pressure on microphone diaphragm (or positive voltage
- applied to tip of WA302 phone plug) produces positive voltage
- on XLR output pin 2 with respect to XLRpin 3 and on the tip of
- the 1/4-inch output jack.
- System Distortion (ref. ± 45 kHz deviation, 1 kHz modulation): <0.3% Total Harmonic Distortion typical
Power Requirements: UR1, UR2: Two 1.5V AA batteries; UR4:100 to 240Vac, 50/60 Hz
- Current Drain: UR1, UR2: 180 mA max. (normal RF power setting) 240 mA max. (high RF power setting); UR4D, UR4S: 0.8 Amps max.
- Battery Life (Typical): UR1, UR2: 9.5 hours (low power); 6 hours (high power)
- Operating Temperature Range: ”18 degrees to +57 degrees C (0 degrees to +135 F)
- NOTE: Battery characteristics may limit this range
- NOTE: Electrical safety approval is based on a maximum ambient temperature of 35 degrees C (95 degrees F).
- Housing: UR1: Cast magnesium; UR2: Aluminum die-cast handle and aluminum machined battery cup; UR4S, UR4D: Galvanized steel
- UR4S Overall Dimensions (H x W x D): 1.72 x 19.00 x 14.39 in. (44 x 483 x 366 mm)
- UR4S Net Weight: 10.6 lbs (4.8 kg)
- UR2/BETA 87A Overall Dimensions (Length x Diameter): 10 x 2 in. (254 x 51 mm)
- UR2/BETA 87A Net Weight: 10.5 oz. (298 g) without battery
- Cartridge Type: Condenser (electret bias)
- Frequency Response: 50 to 20,000 Hz
- Polar Pattern: Supercardioid
- Output Impedance: Rated at 150 ohms (100 ohms actual ± 20%); Recommended minimum load impedance: 800 ohms
- Sensitivity (at 1,000 Hz): Open Circuit Voltage -52.5 dBV/Pa (2 mV)
- (1 Pa = 94 dB SPL)
- Clipping Level (at 1,000 Hz): 1000 ohm Load: -6 dBV (0.5 V)
- Maximum SPL (at 1,000 Hz): 140.5 dB (0.25% THD, 1000 ohm load)
- Self-Noise (equivalent sound pressure level; measured with true rms voltmeter): 23.5 dB typical, A-weighted; 25.5 dB typical, weighted per DIN 45 405
- Dynamic Range: 117 dB (maximum SPL to A-weighted noise level)
- Signal-to-Noise Ratio: 70.5 dB at 94 dB SPL (IEC 651) (S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3; Current Drain: 1.0 to 1.2 mA
- Connector: Three-pin (XLR) professional audio