- Product 483052
Tapco Juice J-2500 Power Amplifier
- Write a Review
Delivering pure premium power and reliability, the 2500-watt J-2500 stereo power amplifier is great for those small rock and DJ gigs needing massive ...Read More
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
If you wanna rock the house, you need the Juice!
Delivering pure premium power and reliability, the 2500-watt J-2500 stereo power amplifier is great for those small rock and DJ gigs needing massive power.
Pure Premium Power
The Tapco Juice series of amps deliver gobs of power and maintain their high-quality sound for volumes ranging from quiet to cranked. With three models delivering 800, 1400 and 2500 watts of premium power amplification you're sure to find a Juice Series amp.
Features you can use
Sure, the Juice Series look great, but who's going to see them in a rack on side of the stage? You will, that's who. That's why Tapco added some nice extras to make your job easier. The front-panel includes a volume control and bright signal presence and overload LEDs for each channel. A tour around the back will reveal a mode select switch for mono/stereo/bridged mono operation, a 30Hz subsonic filter for eliminating the lowest of the low frequencies, plus a main breaker and clip limiter circuit for amplifier and loudspeaker protection. Balanced 1/4-inch and XLR inputs plus separate binding post and Speakon outputs for fast setup and no hunting for adapters.
Great for every application
Whether you're setting up for band practice in the garage, waking up at 5 P.M. to get to the club for tonight's gig, or at the club waiting for the bass player to arrive for sound check, you can count on the Tapco Juice J-2500 amplification system to deliver exceptional sound quality without fail.
- 2500W @ 4 Ohms bridged
- Easily switchable mono/stereo/bridged mono operating modes
- Separate Speakon outputs for Channel A and Channel B
- Third Speakon output for mono bridged applications: also provides both output channels on a single NL4 connector
- 30Hz subsonic filter for low-frequency speaker protection
- Handles for easy transport and protection of level controls
- Defeatable clip limiter
Juice J-2500 Power Amplifier
- Continuous Sine Wave Average Output Power per channel, both channels driven, 20 Hz to 20 kHz
2 ohms: 1400 W
4 ohms: 750 W
8 ohms: 575 W
Bridged Mono Operation, 20 Hz to 20 kHz
4 ohms: 2500 W
8 ohms: 1500 W
Power Bandwidth: -5 Hz to 50 kHz (+0, -3 dB)
Frequency Response: -25 Hz to 25 kHz (+0, -1 dB)
Distortion: THD and SMPTE IMD; 20 Hz to 20 kHz < 0.03% @ 8 ohms
Signal-to-Noise Ration: > 100 dB below rated power into 4 ohms
Channel Separation: > 90 dB @ 1 kHz
Damping Factor: > 300 @ 1 kHz and below
Input Impedance: 20 kOhms balanced; 10 kOhms unbalanced
Input Sensitivity: 1.15 V (+3.4 dBu) for rated power into 4 ohms
Gain: 34 dB
Maximum Input Level: 9.75 Vrms (+22 dBu)
Turn On Delay: 2.5 seconds
Subsonic Filter: 9 dB @ 30 Hz
Topology: Class H
Cooling: Dual variable-speed fans with back to front airflow
Indicators: Channels A and B, SIG (Signal Present), OL (Overload), Power
Idle: 1.0 A
Musical Program @ 8-1/2: 8.1 A
Musical Program @ 4-1/2: 10.0 A
Musical Program @ 2-1/2: 17.2 A
AC Power Requirements
U.S.: 120 VAC, 60 Hz
Europe: 240 VAC, 50 Hz
Japan: 100 VAC, 50/60 Hz
Korea: 220 VAC, 60 Hz
Dimensions: 3.5"H x 19"W x 15.7"D (89x483x400mm)
Weight: 56.2 lbs. (25.5 kg)
Reviewed by 5 customers
Displaying reviews 1-5
I have the J-2500 and the J-1400 in my rack and they stack up nicely with my QSC and Crown amps. Very simple and basic but have yet to fail me. Good amp for the money. I will def buy more when needed.
I've had a Tapco J-2500 amp for almost 2 years. I use it for my alt-rock band's concerts once a month and practices 2 times a week. I power 2 Yamaha S115V subs and 2 Community CS35 15" cabs (all 8 ohms each speaker) with it. I've also used the subs bridged mono.This amp has done everything I have asked it to do and never complained (broken), plus it looks nice and clean in the rack. It is heavy, but so are guitar & bass amps and overweight fans. The only reson I would not buy another is because QSC has those GX models which are 20lbs lighter, with similar output power, as well as more input/output connector options.
I have rated the amp very high based primarily on value. This thing kicks out some amps. I play in a rock/classic rock band and have just started running my high end through this amp. I have a pair of SP5's on top of a couple of JBL subs. Last night I blew a tweeter on one of the SP5's. Not sure if it was the crossover or the tweeter, but am wondering if the underlying culprit is this amp. We push our stuff pretty hard...we mic everything and run it through the PA. I will take the SP5 in next week and see what the deal is.
This is a great amp.Our band bought One and would definitely buy another. It has tons of power and stays clear even when pushed to the edge and will last longer than your ears will. Has nice input options to daisy large systems and comes with nice front grab handles and rubber feet. A good quality Power house amp at an even better price.
I own three of these power amps. Nothing but problems, after a month of use. Good luck trying to get these serviced! It took them 11 months to get a new one to me after circuit failed. They are great dust collectors though. Don't waste your money!