• Shop by Category
  • Hot Deals
  • Looking for Coupons? Call us

MF MD HG Backstage Pass 1-13-16
Best Seller
Tascam Logo
SKU 
J07201 000000000

Tascam DA-3000 Master Recorder/ADDA Converter   

  • Write a Review

The DA-3000 is perfectly designed for stereo PCM/DSD recordings at high sampling frequencies suitable for archival masters. This magnificent unit is ...Read More

In Stock & Ready To Ship

Gold Coverage: (What’s This?)
  • List:
    $1,249.99
  • Shipping (48 Contiguous U.S. States)
    FREE
  • Your Price:
    $99999
  Add to Cart
Add to Wish List
See All Tascam Audio Converters
Musician's Friend Backstage Pass

Earn up to 8,000 in points.

OVERVIEW

The DA-3000 is perfectly designed for stereo PCM/DSD recordings at high sampling frequencies suitable for archival masters. This magnificent unit is capable of recording analog and digital signals up to 192kHz PCM or 5.6MHz DSD. The unit records to both SDHC cards and UDMA supported CF cards.

The variety of inputs and outputs enable connection with all types of studio equipment, including audio interfaces and mic preamps. The analog inputs and outputs include both XLR and RCA jacks. The digital connections include S/PDIF RCA coaxial and XLR jacks to support AES/EBU. The BNC SDIF-3 inputs and outputs support DSD digital connections.

With the goal of making a high-quality audio recorder and ADDA converter easy to use, Tascam designed the front panel with all of the necessary external controls and included long, brightly lit meters and display. The 128x64 OEL display allows you to check necessary information quickly, and the 24-dot level meters allows you to confidently monitor levels at all times.

You can synchronize the operation of multiple DA-3000 units by interconnecting their digital inputs and outputs. Files that have been recorded in sync will have sample-level synchronization as well. In addition to stereo DSD recording of Jazz and classical music, this also makes simple DSD multitrack recording of bands possible.

Use of a dual mono structure for the output circuit eliminates interference between the left and right channels and achieves high audio quality by maximizing the performance of the components. Two high-quality mono circuits are built into the unit. The left/right channels each use one highly-acclaimed BurrBrown PCM1795 D/A converter chip.

The TASCAM DA-45HR, which is still used in many studios, uses a dual mono structure with NE5532 ope amps and BurrBrown D/A converters. By using an equivalent output circuit structure including DA converters of even higher quality that support DSD, the DA-3000 provides a portable high-quality monitoring system.

The internal circuit uses a fully-balanced structure that is completely resistant to noise from the inputs and outputs. This has a great effect on the output and input stage impacting the recorded audio. The input audio is digitalized by the BurrBrown PCM4202 ADC after it passes through the analog input circuit.

Operational amplifiers have a great impact on audio quality, so Tascam carefully selected the NJM2114 and NE5532. In addition, they selected low-impedance capacitors featuring low resistance, low noise and high precision to emphasize audio quality.

In order to assure high-quality audio input and output, a stable power supply is indispensable. The EI core transformer incorporated into this unit has separate coils - one for the digital circuits and control panels and one for the analog circuits - making it possible to capture even higher-quality signals by suppressing noise. In addition, for the clock generator, we have used a temperature-compensated crystal oscillator (TCXO) that boasts 1-ppm precision.

Cooling fans inside equipment generate noise and can cause loss of accuracy when monitoring at low volume levels. With the DA-3000, Tascam has achieved high performance in a fanless design, allowing you to maintain a comfortable monitoring environment that is free of fan noise.

Versatile convertor for multiple applications.

FEATURES
  • Stereo recording to SDHC card or CF card
  • PCM recording format: BWF (44.1/48/88.2/96/176.4/192kHz, 16/24bit)
  • DSD recording format: DSDIFF/DSF (2.8/5.6MHz)
  • SD card slot (supports 4 to 32GB SDHC cards)
  • CF card slot (supports UDMA)
  • WAV file playback
  • Cascade function enables simultaneous operation of multiple units
  • Recording 2 mono files from stereo input possible

Silent physically and electronically, the DA3000 is the digital signial path hub you've been looking for.

SPECIFICATIONS

DA-3000 Master Recorder/ADDA Converter

  • MEDIA
    SD: Supports 4GB to 32GB SDHC cards
    (Media ejection method: push-push)
    CF: Supports 1GB to 64GB Type I CF cards
    USB (Playback and copying only): Supports 2GB to 64GB USB flash drives
    Recording and playback formats:
    PCM: BWF(rec/play) / WAV(playback only),
    44.1/48/88.2/96/176.4/192kHz,
    16/24bit
    DSD: DSDIFF / DSF,
    2.8224/5.6448MHz
    Number of channels: 2 mono(or 1 stereo)

    ANALOG INPUTS:
    UNBALANCED:
    Connector: RCA pin jacks
    Standard input level: -10dBV
    Maximum input level: +6dBV
    Minimum input level: -22dBV
    Input impedance: 22k ohms or greater
    BALANCED:
    Connector: XLR-3-31(1:GND,2:HOT,3:COLD)
    Standard input level: +4dBu
    +6dBu(only when maximum input level is +15dBu)
    Maximum input level: +15dBu,+18dBu,+20dBu,+22dBu,+24dBu(switchable in menu)
    Minimum input level: -8dBu
    -6dBu(only when maximum input level is +15dBu)
    Input impedance: 10k ohms or greater

    ANALOG OUTPUTS:
    UNBALANCED:
    Connector: RCA pin jacks
    Standard output level: -10dBV
    Maximum output level: +6dBV
    Output impedance: 200 ohms or less
    BALANCED:
    Connector: XLR-3-31(1:GND,2:HOT,3:COLD)
    Standard output level: +4dBu
    +6dBu(only when maximum input level is +15dBu)
    Maximum output level: +15dBu,+18dBu,+20dBu,+22dBu,+24dBu(switchable in menu)
    Output impedance: 100 ohms or less

    DIGITAL INPUT:
    S/PDIF,CASCADE: UNBALANCED
    Connector: RCA pin jacks
    Format: IEC60958-3(S/PDIF)
    Input impedance: 75 ohms
    Input frequency:
    when SRC OFF: 44.1/48/88.2/96/176.4/192kHz
    when SRC ON: 32 - 216kHz
    Allowable frequency deviation: +/-100ppm(when SRC OFF)
    AES/EBU: BALANCED
    Connector: XLR-3-31(1:GND,2:HOT,3:COLD)
    Format: AES3-2003/IEC60958-4(AES/EBU)
    Input impedance: 110 ohms
    Input frequency:
    when SRC OFF: 44.1/48/88.2/96/176.4/192kHz
    when SRC ON: 32 - 216kHz
    Allowable frequency deviation: +/-100ppm(when SRC OFF)
    SDIF-3: UNBALANCED
    Connector: BNC Connector x 2(L/R)
    Format: SONY SDIF-3/DSD-raw
    Input impedance: 75 ohms +/-20%
    Clock synchronization frequency: 44.1kHz

    DIGITAL OUT:
    S/PDIF,CASCADE: UNBALANCED
    Connector: RCA pin jacks
    Format: IEC60958-3(S/PDIF)
    Output impedance: 75 ohms
    AES/EBU: BALANCED
    Connector: XLR-3-31(1:GND,2:HOT,3:COLD)
    Format: AES3-2003/IEC60958-4(AES/EBU)
    Output impedance: 110 ohms
    SDIF-3: UNBALANCED
    Connector: BNC Connector x 2(L/R)
    Format: SONY SDIF-3/DSD-raw
    Output impedance: 10 ohms +/-20%
    Clock synchronization frequency: 44.1kHz
    WORD SYNC IN:
    Connector: BNC Connector
    Input level: 5V TTL equivalent
    Input impedance: 75 ohms +/-10%
    Input frequency: 44.1k/48k/88.2k/96k/176.4k/192k Hz
    Allowable frequency deviation: +/-100ppm

    WORD SYNC THRU/OUT:
    Connector: BNC Connector
    Output level: 5V TTL equivalent
    Output impedance: 75 ohms +/-10%
    Output frequency: 44.1k/48k/88.2k/96k/176.4k/192k Hz
    Frequency stability: +/-1ppm or less(Ta=25C)
    USB:

    DEVICE:
    Connector: 4-pin USB A-type
    Protocol: USB 2.0 HIGH SPEED(480Mbps)
    Power rating: DC 5.0V 0.5A
    KEYBORD:
    Connector: 4-pin USB A-type
    Protocol: USB 1.1 FULL SPEED(12Mbps)
    Power rating: DC 5.0V 0.2A
    Control input and output:
    Infrared receiver: TASCAM RC-10 wireless remote controller
    PHONES:
    Connector: Standard 6.3mm (1/4') stereo jack
    Maximum output: 45mW + 45mW (into 32 ohms load, 0.1% distortion)
    Power: AC120V, 60Hz(US/Canada Version)
    AC220-240V, 50-60Hz(UK/EUR/Australia Version)
    Power consumption: 24W
    Dimensions: 483(W)—45(H)—305(D)mm
    weight: 4.2kg
    Operating temperature range: 0 - +40C
    Standard accessories: 3P power cord, Wireless remote controller (TASCAM RC-10), coin battery for testing remote control (preinstalled), screw kit for rack-mounting, warranty card, Owner's manual

    Audio performance
    Recording
    Frequency response:
    PCM: 20 - 20kHz +0.1dB/-0.5dB (Fs=44.1k/48kHz,JEITA)
    20 - 40kHz +0.1dB/-1dB (Fs=88.2k/96kHz,JEITA)
    20 - 80kHz +0.1dB/-6dB (Fs=176.4k/192kHz,JEITA)
    DSD: 20 - 50kHz +0.1dB/-3dB (DSD,JEITA)
    20 - 100kHz +0.1dB/-12dB (DSD,JEITA)
    Distortion
    (THD+N, 1kHz): 0.003% or less (Ref:-16dB/BALANCED,JEITA)
    0.005% or less (UNBALANCED,JEITA)
    S/N ratio:
    PCM(24bit mode): 113dB or higher (Ref:-20dB/BALANCED,JEITA)
    111dB or higher (UNBALANCED,JEITA)
    DSD: 106dB or higher (Ref:-20dB/BALANCED,AES-17 20k LPF)
    104dB or higher (UNBALANCED,AES-17 20k LPF)
    Crosstalk(1kHz): 108dB or higher (JEITA)
    Playback
    Frequency response:
    PCM: 20 - 20kHz +/-0.1dB (Fs=44.1k/48kHz,JEITA)
    20 - 40kHz +0.1dB/-0.3dB (Fs=88.2k/96kHz,JEITA)
    20 - 80kHz +0.1dB/-3dB (Fs=176.4k/192kHz,JEITA)
    DSD: 20 - 50kHz +0.1dB/-3dB (DSD,JEITA)
    20 - 100kHz +0.1dB/-12dB (DSD,JEITA)
    Distortion
    (THD+N, 1kHz): 0.003% or less (Ref:-16dB/BALANCED,JEITA)
    0.001% or less (UNBALANCED,JEITA)
    S/N ratio:
    PCM: 118dB or higher (Ref:-20dB/BALANCED,JEITA)
    116dB or higher (UNBALANCED,JEITA)
    DSD: 116dB or higher (Ref:-20dB/BALANCED,AES-17 20k LPF)
    114dB or higher (UNBALANCED,AES-17 20k LPF)
Reviews
Loading....
Ship To: US Flag
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.