Skip to main content
Play Video

DA-3000 Master Recorder/ADDA Converter

We're sorry-this item is unavailable.
Contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Overview

Versatile convertor for multiple applications.

The DA-3000 is perfectly designed for stereo PCM/DSD recordings at high sampling frequencies suitable for archival masters. This magnificent unit is capable of recording analog and digital signals up to 192kHz PCM or 5.6MHz DSD. The unit records to both SDHC cards and UDMA supported CF cards.

The variety of inputs and outputs enable connection with all types of studio equipment, including audio interfaces and mic preamps. The analog inputs and outputs include both XLR and RCA jacks. The digital connections include S/PDIF RCA coaxial and XLR jacks to support AES/EBU. The BNC SDIF-3 inputs and outputs support DSD digital connections.

With the goal of making a high-quality audio recorder and ADDA converter easy to use, TASCAM designed the front panel with all of the necessary external controls and included long, brightly lit meters and display. The 128x64 OEL display allows you to check necessary information quickly, and the 24-dot level meters allows you to confidently monitor levels at all times.

You can synchronize the operation of multiple DA-3000 units by interconnecting their digital inputs and outputs. Files that have been recorded in sync will have sample-level synchronization as well. In addition to stereo DSD recording of Jazz and classical music, this also makes simple DSD multitrack recording of bands possible.

Use of a dual mono structure for the output circuit eliminates interference between the left and right channels and achieves high audio quality by maximizing the performance of the components. Two high-quality mono circuits are built into the unit. The left/right channels each use one highly-acclaimed BurrBrown PCM1795 D/A converter chip.

The TASCAM DA-45HR, which is still used in many studios, uses a dual mono structure with NE5532 ope amps and BurrBrown D/A converters. By using an equivalent output circuit structure including DA converters of even higher quality that support DSD, the DA-3000 provides a portable high-quality monitoring system.

The internal circuit uses a fully-balanced structure that is completely resistant to noise from the inputs and outputs. This has a great effect on the output and input stage impacting the recorded audio. The input audio is digitalized by the BurrBrown PCM4202 ADC after it passes through the analog input circuit.

Operational amplifiers have a great impact on audio quality, so TASCAM carefully selected the NJM2114 and NE5532. In addition, they selected low-impedance capacitors featuring low resistance, low noise and high precision to emphasize audio quality.

In order to assure high-quality audio input and output, a stable power supply is indispensable. The EI core transformer incorporated into this unit has separate coils - one for the digital circuits and control panels and one for the analog circuits - making it possible to capture even higher-quality signals by suppressing noise. In addition, for the clock generator, we have used a temperature-compensated crystal oscillator (TCXO) that boasts 1-ppm precision.

Cooling fans inside equipment generate noise and can cause loss of accuracy when monitoring at low volume levels. With the DA-3000, TASCAM has achieved high performance in a fanless design, allowing you to maintain a comfortable monitoring environment that is free of fan noise.

Features

  • Stereo recording to SDHC card or CF card
  • PCM recording format: BWF (44.1/48/88.2/96/176.4/192kHz, 16/24-bit)
  • DSD recording format: DSDIFF/DSF (2.8/5.6MHz)
  • SD card slot (supports 4 to 32GB SDHC cards)
  • CF card slot (supports UDMA)
  • WAV file playback
  • Cascade function enables simultaneous operation of multiple units
  • Recording 2 mono files from stereo input possible

Silent physically and electronically, the DA3000 is the digital signial path hub you've been looking for.

Specs

DA-3000 Master Recorder/ADDA Converter Specifications:

MEDIA
  • SD: Supports 4GB to 32GB SDHC cards
  • (Media ejection method: push-push)
  • CF: Supports 1GB to 64GB Type I CF cards
  • USB (Playback and copying only): Supports 2GB to 64GB USB flash drives
  • Recording and playback formats:
  • PCM: BWF(rec/play) / WAV(playback only),
  • 44.1/48/88.2/96/176.4/192kHz, 16/24-bit
  • DSD: DSDIFF / DSF, 2.8224/5.6448MHz
  • Number of channels: 2 mono(or 1 stereo)
ANALOG INPUTS
  • UNBALANCED:
  • Connector: RCA pin jacks
  • Standard input level: -10dBV
  • Maximum input level: +6dBV
  • Minimum input level: -22dBV
  • Input impedance: 22k ohms or greater
  • BALANCED:
  • Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD)
  • Standard input level: +4dBu, +6dBu (only when maximum input level is +15dBu)
  • Maximum input level: +15dBu, +18dBu, +20dBu, +22dBu, +24dBu (switchable in menu)
  • Minimum input level: -8dBu
  • -6dBu (only when maximum input level is +15dBu)
  • Input impedance: 10k ohms or greater
ANALOG OUTPUTS
  • UNBALANCED:
  • Connector: RCA pin jacks
  • Standard output level: -10dBV
  • Maximum output level: +6dBV
  • Output impedance: 200 ohms or less
  • BALANCED:
  • Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD)
  • Standard output level: +4dBu
  • +6dBu (only when maximum input level is +15dBu)
  • Maximum output level: +15dBu, +18dBu, +20dBu, +22dBu, +24dBu (switchable in menu)
  • Output impedance: 100 ohms or less
  • DIGITAL INPUT: S/PDIF, CASCADE: UNBALANCED
  • Connector: RCA pin jacks
  • Format: IEC60958-3 (S/PDIF)
  • Input impedance: 75 ohms
  • Input frequency:
  • when SRC OFF: 44.1/48/88.2/96/176.4/192kHz
  • when SRC ON: 32–216kHz
  • Allowable frequency deviation: +/-100ppm (when SRC OFF)
  • AES/EBU: BALANCED
  • Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD)
  • Format: AES3-2003/IEC60958-4 (AES/EBU)
  • Input impedance: 110 ohms
  • Input frequency:
  • when SRC OFF: 44.1/48/88.2/96/176.4/192kHz
  • when SRC ON: 32–216kHz
  • Allowable frequency deviation: +/-100ppm(when SRC OFF)
  • SDIF-3: UNBALANCED
  • Connector: BNC Connector x 2(L/R)
  • Format: SONY SDIF -3/DSD-raw
  • Input impedance: 75 ohms +/-20%
  • Clock synchronization frequency: 44.1kHz
  • DIGITAL OUT:
  • S/PDIF, CASCADE: UNBALANCED
  • Connector: RCA pin jacks
  • Format: IEC60958-3 (S/PDIF)
  • Output impedance: 75 ohms
  • AES/EBU: BALANCED
  • Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD)
  • Format: AES3-2003/IEC60958-4 (AES/EBU)
  • Output impedance: 110 ohms
  • SDIF-3: UNBALANCED
  • Connector: BNC Connector x 2 (L/R)
  • Format: SONY SDIF-3/DSD-raw
  • Output impedance: 10 ohms +/-20%
  • Clock synchronization frequency: 44.1kHz
  • WORD SYNC IN:
  • Connector: BNC Connector
  • Input level: 5V TTL equivalent
  • Input impedance: 75 ohms +/-10%
  • Input frequency: 44.1k/48k/88.2k/96k/176.4k/192kHz
  • Allowable frequency deviation: +/-100ppm
  • WORD SYNC THRU/OUT:
  • Connector: BNC Connector
  • Output level: 5V TTL equivalent
  • Output impedance: 75 ohms +/-10%
  • Output frequency: 44.1k/48k/88.2k/96k/176.4k/192kHz
  • Frequency stability: +/-1ppm or less (Ta=25C)
  • USB:
  • DEVICE:
  • Connector: 4-pin USB A-type
  • Protocol: USB 2.0 HIGH SPEED (480Mbps)
  • Power rating: DC 5.0V 0.5A
  • KEYBOARD:
  • Connector: 4-pin USB A-type
  • Protocol: USB 1.1 FULL SPEED (12Mbps)
  • Power rating: DC 5.0V 0.2A
  • Control input and output:
  • Infrared receiver: TASCAM RC-10 wireless remote controller
  • PHONES:
  • Connector: Standard 6.3 mm (1/4') stereo jack
  • Maximum output: 45mW + 45mW (into 32 ohms load, 0.1% distortion)
  • Power: AC120V, 60Hz (US/Canada Version)
  • AC220-240V, 50–60Hz(UK/EUR/Australia Version)
  • Power consumption: 24W
  • Dimensions (WxHxD): 483 x 45 x 305 mm
  • weight: 4.2 kg
  • Operating temperature range: 0–+40C
  • Standard accessories: 3P power cord, Wireless remote controller (TASCAM RC-10), coin battery for testing remote control (preinstalled), screw kit for rackmounting, warranty card, Owner's manual
  • Audio performance
  • Recording
  • Frequency response:
  • PCM: 20 - 20kHz +0.1dB/-0.5dB (Fs=44.1k/48kHz,JEITA)
  • 20 - 40kHz +0.1dB/-1dB (Fs=88.2k/96kHz,JEITA)
  • 20 - 80kHz +0.1dB/-6dB (Fs=176.4k/192kHz,JEITA)
  • DSD: 20 - 50kHz +0.1dB/-3dB (DSD,JEITA)
  • 20 - 100kHz +0.1dB/-12dB (DSD,JEITA)
  • Distortion
  • (THD+N, 1kHz): 0.003% or less (Ref:-16dB/BALANCED,JEITA)
  • 0.005% or less (UNBALANCED,JEITA)
  • S/N ratio:
  • PCM(24bit mode): 113dB or higher (Ref:-20dB/BALANCED,JEITA)
  • 111dB or higher (UNBALANCED,JEITA)
  • DSD: 106dB or higher (Ref:-20dB/BALANCED,AES-17 20k LPF)
  • 104dB or higher (UNBALANCED,AES-17 20k LPF)
  • Crosstalk(1kHz): 108dB or higher (JEITA)
  • Playback
  • Frequency response:
  • PCM: 20 - 20kHz +/-0.1dB (Fs=44.1k/48kHz,JEITA)
  • 20 - 40kHz +0.1dB/-0.3dB (Fs=88.2k/96kHz,JEITA)
  • 20 - 80kHz +0.1dB/-3dB (Fs=176.4k/192kHz,JEITA)
  • DSD: 20 - 50kHz +0.1dB/-3dB (DSD,JEITA)
  • 20 - 100kHz +0.1dB/-12dB (DSD,JEITA)
  • Distortion
  • (THD+N, 1kHz): 0.003% or less (Ref:-16dB/BALANCED,JEITA)
  • 0.001% or less (UNBALANCED,JEITA)
  • S/N ratio:
  • PCM: 118dB or higher (Ref:-20dB/BALANCED,JEITA)
  • 116dB or higher (UNBALANCED,JEITA)
  • DSD: 116dB or higher (Ref:-20dB/BALANCED,AES-17 20k LPF)
  • 114dB or higher (UNBALANCED,AES-17 20k LPF)
Shop with a Friend
Free Shipping
  • Free Standard Ground shipping (48 contiguous states, some overweight and Used/Vintage items excluded).
  • Orders placed before 3 p.m. ET usually ship the same business day.
Learn More
2-Year Free Warranty on Guitars

Every guitar or bass you purchase from Musician's Friend (electric or acoustic, New or Open Box) includes two years of protection from manufacturer defects.

Contact Us for Details
We're Here for You

Our Gear Advisers are available to guide you through your entire shopping experience. Call or Chat for expert advice and to hear the latest deals.

Contact Us
Proactive Advisor Support Chat