- Product 183021
TC Electronic FireworX Multi Effects Processor
- Write a Review
The TC Electronic FireworX Multi-effects Processor boasts a 64-position routing grid. Simply place algorithms anywhere on the grid and they will be a...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.Customers Also Viewed:
Explosive and radical multi-effects processor with TC's studio-quality sound.
The TC Electronic FireworX Multi-effects Processor boasts a 64-position routing grid. Simply place algorithms anywhere on the grid and they will be automatically wired together. Features an 80 million ips processor with the TC DARC3 chip, and the FireworX monitors the amount of DSP power being used, so you can wire together as many algorithms as you want until it tells you it's maxed out. Sound palette includes vocoder, ring modulation, synth algorithm, format filter, resonant filter, multi tap delay, reverse delay, reverb, delay, chorus, flange, phase, pitch, and fractal noise. You can change the order of effects, repeat certain blocks, add feedback loops, even insert an external effect. It shreds. And now it's available with word clock.
FireworX is a very powerful machine and within the borders of the extensive DSP power you have the possibility to create any imaginable effect. The impressive palette of effects in FireworX includes:
· Soft Compressor
· Hard Compressor/Limiter
· Resonance Filter
· Bandpass Filter
· Resochord Filter
· Formant Filter
· Drive Distortion
· Cruncher Distortion
· Ring Modulator
· Curve Generator Synth.
· Chaos Generator Synth.
· Noise Generator Synth.
· Single Voice Pitch shift
· Dual Voice Pitch shift
· Classic Chorus
· Advanced Chorus
· Classic Flanger
· Advanced Flanger
· Stereo Delay
· Dual mono Delay
· Dual Three Tap Delay
· One Tap Delay
· Six Tap Delay
· Reverse Delay
· Advanced Reverb
· Simple Tremolo
· Advanced Tremolo
· Simple Panner
· Surround Panner
· Stereo Enhancer
· 5 band Parametric EQ
· 4 band modifiable parametric EQ
· Feedback Send
· Feedback Return
· Insert Send
· Insert Return
All effects-algorithms are of the best TC quality, and can be assigned in any combination in the Routing grid.
Setting up effects-algorithm blocks in the FireworX Routing matrix is extremely easy. With a double click on the effect block panel buttons, you insert the effect type chosen with the Value wheel. You can change the order of the effects, repeat certain blocks, add feedback loops and even insert an external device.
Choosing an effect block and pushing Enter will bring up the Sub Routing I/O page of the chosen block. You can decide on where the chosen effect will get its fuel from and where to route the power. This way you have exactly the same flexibility in connecting the effects as if you had a couple of external effects-machines and a patch-bay.
The number of processing blocks in a Routing setup is only limited by the DSP-power consumption. It is possible to monitor the percentage of each block, which is convenient when constructing complex routings.
Looking for versatility and unlimited possibilities? The Modifier section of the FireworX is the key to versatility. Only your imagination is the limit here. Think of any possible way to combine modifiers and effect parameters, and make it happen. Creativity brought to work
- all made possible by the FireworX.
Available in the Modifier Matrix page, is the constant set of internal and external parameter modifiers. 8 external control inputs (e.g. assigned to MIDI), and 8 internal modifiers like e.g. ADSR's, LFO's, Envelopes + more. These modifiers can be assigned to control any parameter appearing on a list at the right of the display. This list is unique for the current effects-combination at the Routing and Edit pages.
Like in a patchbay, simply connect virtual wires from the desired modifier to the parameter that dynamically should be adjusted.
An example of an internal modifier is Freeform. Actually this is a tiny sequencer that allows you to create a more "rhythmic" sequence than e.g. an ADSR. This is very useful if you want a Phaser or a Tremolo to act as a percussive sidekick to a breakbeat.
All inserted effects-algorithms in the Routing grid has all the parameters for editing that you can expect from even the high-end stand alone effects units.
When scrolling the Edit window, simply use the cursor to select effect-blocks and press Enter to access the parameter list.
On top of all the algorithms, all internal Modifiers and several other functions have multiple adjustment possibilities.
When using a machine that has so many combinations of settings an essential thing is factory presets. This gives you a useful set of starting points for various applications.
The FireworX has no less than 400 factory settings. The library contains lots of weird sounding effects, beautiful outdoor location reverbs and music-effects you have never dreamt were possible to create.
Preset examples from the library:
· Vocode Tracker
· Angry Moog
· Arctic Strings
· Dub The Universe
· The Whisperer
· Envelope Filter
· Little Speaker
· Warm Phaser
This way the FireworX can become the "secret weapon" for lots of producers and engineers, when they want to ad a unique touch that makes the production stand out from the crowd.
Both a full package of presets made for music-production and a package for Film-production, are standard in the FireworX.
The FireworX has multiple ways of storing favorite settings and recalling them again.
400 factory presets can be dialed up at any time, adjusted and stored in 200 internal User-bank locations.
If the 200 User-presets are not enough, a standard PCMCIA card can be inserted, and additional 200 presets can be stored.
Another advantage of the card is obviously that it can be carried around, making it possible for you to have your best settings available, no matter what studio-setup you are working in.
With the preset filter it is possible to search for presets containing e.g. a Vocoder, without having to scroll through all the presets in the machine.
The FireworX can be set up in various combinations. How you should set it up depends on your specific application. The vast amount of digital and analog I/O's, means that the FireworX will fit into multiple system setups, and most likely also combinations you never have considered possible.
The FireworX can be inserted on a Group or even a channel, and will then handle the wet/dry balance on the signal.
The FireworX can also be used as a standard effects unit, with an Aux send and returns on channels or stereo-inputs.
Finally, the FireworX can be connected with the analog I/O's as e.g. inserted on a group, and simultaneously an external device can be inserted using the digital I/O's and the insert blocks in the Routing grid.
- Hardcore 80 million ips processor with the TC DARC3 chip
- 8x8 position routing grid. Simply place the algorithms anywhere on the grid and they will be automatically "wired" together in parallel and serial, depending on the position
- Full range of true studio-quality effects
- FireworX uses a dynamic resource allocation system that allows you to monitor how much DSP power you are using. You can keep adding algorithms to the routing grid until you hit the DSP power limit without affecting the FX quality
- When the desired combination of algorithms are chosen in the Routing grid, all thinkable editing tools are available, including a unique modifier matrix allowing you to twist parameters dynamically in a way you have never experienced before
- MIDI sync
Make your mixes stand out from the rest with a awe-inspiring FireworX display. Order today!
- XLR (AES/EBU)
- RCA Phono (SPDIF)
- Optical (Toslink, ADAT)
- AES/EBU (24 bit)
- SPDIF (20 bit)
- EIAJ CP-340
- IEC 958
- EIAJ Optical (Toslink)
- ADAT Lite pipe
- Output Dither: HPF TPDF dither 8-24 bit
- Word Clock Input: RCA Phono, 75 ohm, 0.6 to 10 Vpp
- Sample Rates: 44.1 kHz, 48 kHz
- Processing Delay: 0.2 ms @ 48 kHz
- Frequency Response DIO: 20Hz to 23.9kHz +0,01/-0,1 dB @ 48 kHz
- Analog Input Connectors: XLR balanced (pin 2 hot)
- Impedance: 20k ohm
- Max. Input Level: +22 dBu (balanced)
- Min. Input Level: -10 dBu
- Sensitivity: @ 12dB headroom: -22dBu to +10dBu
- A to D Conversion: 24 bit (1 bit, 128 times oversampling)
- A to D Delay: 0.8 ms @ 48 kHz
- Dynamic Range: >103 dB (unweighted), >106 dB (A)
- THD: -95dB (0,0018%) @ 1kHz -6dBFS (FS @ +16dBu)
- Frequency Response: 10Hz to 20kHz: +0/-0.2 dB
- Crosstalk: <-80 dB, 10 Hz to 20 kHz, typical -100 dB @ 1 kHz
- Analog Output Connectors: XLR balanced (pin 2 hot)
- Impedance: 100 ohm (active transformer)
- Max. Output Level: +22 dBu (balanced)
- Full Scale Output Range: -10dBu to +22dBu
- D to A Conversion: 128 times oversampling)
- D to A Delay: 0.5 ms @ 48 kHz
- Dynamic Range: >100dB (unweighted), >104dB (A)
- THD: -86 dB (0.005%) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
- Frequency Response: 10Hz to 20kHz: +0/-0.5dB
- Crosstalk: <-60dB, 10Hz to 20kHz typical -90dB @ 1kHz
- EMC complies with: EN 55103-1, EN 55103-2 and Class B limits of FCC rules, part 15
- Safety certified to: IEC 65, EN 60065, UL 1419 and CSA E65
- Operating Temperature: 32 F to 122 F (0 C to 50 C)
- Storage Temperature: -22 F to 167 F (-30 C to 70 C)
- Humidity: Max. 90 % non-condensing
- PCMCIA Interface Connector: PC Card, 68 pin type 1 cards
- Standards: PCMCIA 2.0, JEIDA 4.0
- Card Format: Supports up to 2 MB SRAM
- Control Interface: MIDI In/Out/Through: 5 Pin DIN
- GPI, Pedal, Fader: 1/4" phone jack
- General Finish: Anodized aluminum front, Plated and painted steel chassis
- Dimensions: 56 x 128 dot graphic LCD-display
- 19" x 1-3/4" x 8-3/16" (483 x 44 x 208 mm)
- Weight: 5.2 lb. (2.35 kg)
- Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
- Power Consumption: <20 W
- Backup Battery Life: >10 years
- Warranty Parts and Labor: 1 year
Reviewed by 2 customers
Displaying reviews 1-2
Comments about TC Electronic FireworX Multi Effects Processor:
This device is used on countless stadium shows, and works with larger venues, as well as the more compact. All of the major effects that help create new sounds are available to edit, and blend with others to create sounds that have never been heard before. All effects can be fully edited and arranged in any order. Up to eight effects can be arranged, and active at once. It features compressors, limiters, de-essers, distortions, multi-tap delays, ultra-realistic reverbs, chorusing, flanging, pitch-shifting, multi-stage phasing, noise gates, detuning, volume swelling, tremolos, vibratos, and much more. There are hundreds of very useful, and unique presets, and plenty of user-friendly empty presets to store your settings. It is great for studio and live work, and fully MIDI compatible. Connect it to your favorite footswitch for amazing live effects switching on the fly. For the price, you are getting the materials that suit the most effect-heavy professionals.
Comments about TC Electronic FireworX Multi Effects Processor:
I've had this unit for some time. I've been able to produce wacky sounds just by tweaking the presets. But after opening back up the manual recently, I "re-discovered" this beauty... WOW!... what a programmable nirvana! I am using this in live shows with a MIDI pedal controller. Amazing the palettes I've been able to pull together on this thing.