• Gift Certificate
  • Track Order
  • Help
  • Feedback [+]
  • Ship To: US Flag
  • Shop by Department
  • Hot Deals

MF MD HG Warehouse Sale Top Deals 7-25-14

Waves PRS Guitar Interface  

  • Write a Review
Product #703137

We're sorry—this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Similar Items:
  • TASCAM US-322 2x2 USB Audio Interface
    TASCAM US-322 2x2 USB Audio Interface $149.99
  • Waves

    A small footprint guitar interface that cuts out the hum but keeps the parts that are hummable.

    The engineering brains at Waves and Paul Reed Smith guitars have put their heads together to create this high-quality interface which transforms your unbalanced high impedance guitar signal into a balanced low impedance signal, reducing hum and retaining your full dynamic range. The result is ultra-high fidelity at the most critical point in the signal path. The compact black box features studio-grade jacks, a large Gain knob, LED indicators for level, low battery, and power. It's transparent pre-amp and custom-designed circuitry are just what you need when you're ready to lay down your hot new guitar licks.

    Features

    • Transparent pre-amplifier
    • Custom-designed circuitry
    • Audiophile-quality components
    • Studio-grade balanced and unbalanced jacks (one XLR and 1/4" TS jack each)
    • Micorophone/line level outputs
    • Gain knob

    Capture your guitar's full dynamics and fidelity, and leave the buzzing for something else. Order this potent interface today!

     

    PRS Guitar Interface Specifications:

    • Dimensions: 9.5cm (W) x 4.3cm (H) x 11.5cm (D)
    • Weight: 356g
    • TRS input
    • Input impedance: >1 Mega Ohm unbalanced
    • Max input level: 1.1 VRMS.
    • Power saving switch: Automatic shut down when input jack is not connected
    • Balanced XLR input
    • All measurements were performed with volume at a nominal setting
    • Output impedance: 50 ohm
    • S/N: >105 at line level, (S measured at 1%, 1kHz, A-weighted)
    • Response: 20-20kHz, -3dB @ 11kHz, -5dB at 20kHz
    • THD+N: <0.005 (< -90dB) at -10dB below max sensitivity level
    • Sensitivity: 1.1Vrms at line level, 2.5 Vrms at mic Level
    • Gain: 11dB at line level, -28dB at mic level. ±1.5dB
    • Volume range: +5dB, -10dB refer to nominal setting
    • Output short circuit protection: Ground lift switch
    • Power: Two 9V Batteries, 12-18V DC, 0.5A minimum
    • Unbalanced PL Jack output
    • All measurements were performed with volume at a nominal TD setting
    • Output impedance: 50 ohms
    • Output impedance: 100 ohms
    • S/N: >105 at line level, (S measured at 1%, 1kHz, A-weighted)
    • Response: 20-20Khz, -3dB at 11kHz, -5dB at 20kHz
    • THD+N: <0.005 (< -90dB) at -10dB below max sensitivity level
    Customer Reviews
    Loading....

    Review Snapshot®

    by PowerReviews
    WavesPRS Guitar Interface
     
    5.0

    (based on 1 review)

    Ratings Distribution

    • 5 Stars

       

      (1)

    • 4 Stars

       

      (0)

    • 3 Stars

       

      (0)

    • 2 Stars

       

      (0)

    • 1 Stars

       

      (0)

    Reviewed by 1 customer

    Displaying review 1

    Back to top

    (6 of 6 customers found this review helpful)

     
    5.0

    perfect for what it does

    By Anonymous

    from Undisclosed

    Comments about Waves PRS Guitar Interface:

    This box basically matches impadence, it's also a pre-amp which sends out a balanced signal, in mic AND line levels, so you can re-amp it in the signal chain or plug directly into a balanced input.If you work in a studio and mic your amps, you wont need this obviously, but for DAW application, this little doodad does WAY more than I expected.The output runs a balanced (mic) line into your inputs. And the damndest thing is that it really gets rid of that computer hum that has plagued many di daw recordings. It's quite the surprise. The signal also sounds much more full than DI or micing a clean amp. The output is not usb or firewire, it's an analog signal, which I heard some complain about, but personally I wouldn't want this to also try and act as an AD converter. It does what it says it will do perfectly, it gives you an incredibly clear tone to use with virtual amp plugins. Of all the consumer-grade guitar contraptions I have come across, this is the first that is actually worth using in legitimate recordings if you plan on using amp emulation.

    Comment on this review

    You are changing the Ship-To country.

    Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.